At Mon, 3 Nov 2003 13:20:12 +0000,
Peter Chapman wrote:
>
> On Mon, Nov 03, 2003 at 01:20:22PM +0100, Takashi Iwai tiwai-at-suse.de |alsa-devel|
> wrote:
> > At Sun, 2 Nov 2003 11:46:34 +0000,
> > Peter Chapman wrote:
> > >
> > > I have an SBLive! which came with a Dell Dimension PC. The snd-emu10k1
> > > module has been refusing to load ("EMU10K1/Audigy soundcard not found or
> > > device busy"), however I found the following patch makes it work:
> >
> > most likely your ac97 codec chip has the IEC958 control, which
> > conflicts with the native emu10k1's control.
> > please check /proc/asound/card0/ac97#0 (with your patch).
> >
> >
>
> Is this what you mean?
> $ cat /proc/asound/card0/codec97#0/ac97#0-0
> 0-0/0: Cirrus Logic CS4297A rev 4
>
> Capabilities : -headphone out-
> DAC resolution : 20-bit
> ADC resolution : 18-bit
> 3D enhancement : Crystal Semi 3D Stereo Enhancement
>
> Current setup
> Mic gain : +0dB [+0dB]
> POP path : pre 3D
> Sim. stereo : off
> 3D enhancement : off
> Loudness : off
> Mono output : MIX
> Mic select : Mic1
> ADC/DAC loopback : off
> Extended ID : codec=0 rev=0 AMAP DSA=0
> Extended status :
> SPDIF Control : Consumer PCM Category=0x2 Generation=1 Rate=48kHz
>
> I can't find any mention of IEC958, but then I don't really know what
> I'm doing! I can check the chips on the card itself when I get home, if
> that will help.
IEC958 is aka SPDIF. you see it in the above too :)
does the board have spdif i/o?
Takashi
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive? Does it
help you create better code? SHARE THE LOVE, and help us help
YOU! Click Here: http://sourceforge.net/donate/
_______________________________________________
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
