: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
system 00:0b: ioport range 0x40b-0x40b has been reserved
system 00:0b: ioport range 0x4d6-0x4d6 has been reserved
system 00:0b: ioport range 0xc00-0xc01 has been reserved
system 00:0b: ioport range 0xc14-0xc14 has been reserved
system 00:0b: ioport range 0xc50-0xc51 has been reserved
system 00:0b: ioport range 0xc52-0xc52 has been reserved
system 00:0b: ioport range 0xc6c-0xc6c has been reserved
system 00:0b: ioport range 0xc6f-0xc6f has been reserved
system 00:0b: ioport range 0xcd0-0xcd1 has been reserved
system 00:0b: ioport range 0xcd2-0xcd3 has been reserved
system 00:0b: ioport range 0xcd4-0xcd5 has been reserved
system 00:0b: ioport range 0xcd6-0xcd7 has been reserved
system 00:0b: ioport range 0xcd8-0xcdf has been reserved
system 00:0b: ioport range 0x800-0x89f has been reserved
system 00:0b: ioport range 0xb00-0xb0f has been reserved
system 00:0b: ioport range 0xb20-0xb3f has been reserved
system 00:0b: ioport range 0x900-0x90f has been reserved
system 00:0b: ioport range 0x910-0x91f has been reserved
system 00:0b: ioport range 0xfe00-0xfefe has been reserved
system 00:0b: iomem range 0xffb80000-0xffbfffff has been reserved
system 00:0b: iomem range 0xfec10000-0xfec1001f has been reserved
system 00:0d: ioport range 0x290-0x29f has been reserved
system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0f: iomem range 0x0-0x9ffff could not be reserved
system 00:0f: iomem range 0xc0000-0xcffff could not be reserved
system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
system 00:0f: iomem range 0x100000-0xcfffffff could not be reserved
system 00:0f: iomem range 0xfec00000-0xffffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0xc000-0xcfff
pci 0000:00:01.0:   MEM window: 0xf9d00000-0xf9efffff
pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
pci 0000:00:0a.0:   IO window: 0xd000-0xdfff
pci 0000:00:0a.0:   MEM window: 0xf9f00000-0xf9ffffff
pci 0000:00:0a.0:   PREFETCH window: 0x000000f3f00000-0x000000f3ffffff
pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
pci 0000:00:14.4:   IO window: 0xe000-0xefff
pci 0000:00:14.4:   MEM window: 0xfa000000-0xfebfffff
pci 0000:00:14.4:   PREFETCH window: 0x000000f4000000-0x000000f7ffffff
pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:0a.0: setting latency timer to 64
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffff]
bus: 01 index 0 io port: [0xc000-0xcfff]
bus: 01 index 1 mmio: [0xf9d00000-0xf9efffff]
bus: 01 index 2 mmio: [0xd0000000-0xdfffffff]
bus: 01 index 3 mmio: [0x0-0x0]
bus: 02 index 0 io port: [0xd000-0xdfff]
bus: 02 index 1 mmio: [0xf9f00000-0xf9ffffff]
bus: 02 index 2 mmio: [0xf3f00000-0xf3ffffff]
bus: 02 index 3 mmio: [0x0-0x0]
bus: 03 index 0 io port: [0xe000-0xefff]
bus: 03 index 1 mmio: [0xfa000000-0xfebfffff]
bus: 03 index 2 mmio: [0xf4000000-0xf7ffffff]
bus: 03 index 3 io port: [0x00-0xffff]
bus: 03 index 4 mmio: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
type=2000 audit(1231621599.264:1): initialized
highmem bounce pool size: 64 pages
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
msgmni has been set to 1710
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pci 0000:01:05.0: Boot video device
pcieport-driver 0000:00:0a.0: setting latency timer to 64
pcieport-driver 0000:00:0a.0: found MSI capability
pci_express 0000:00:0a.0:pcie00: allocate port service
pci_express 0000:00:0a.0:pcie03: allocate port service
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
[drm] Initialized drm 1.1.0 20060810
floppy0: no floppy controllers found
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
dmfe 0000:03:08.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
eth0: Davicom DM9102 at pci0000:03:08.0, 00:80:ad:7f:a1:ae, irq 23.
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-cd driver 5.00
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xf9cffc00 port 0xf9cffd00 irq 22
ata2: SATA max UDMA/133 abar m1024@0xf9cffc00 port 0xf9cffd80 irq 22
ata3: SATA max UDMA/133 abar m1024@0xf9cffc00 port 0xf9cffe00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xf9cffc00 port 0xf9cffe80 irq 22
ata1: softreset failed (device not ready)
ata1: failed due to HW bug, retry pmp=0
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access     ATA      ST3250410AS      3.AA PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xf9cff800
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xf9cff400
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 16, io mem 0xf9cfe000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 16, io mem 0xf9cfd000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xf9cfc000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xf9cfb000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 18, io mem 0xf9cfa000
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:PSKE,PNP0f03:PSMS] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input2
cpuidle: using governor ladder
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI No-Shortcut mode
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 236k freed
kjournald starting.  Commit interval 5 seconds
usb 3-3: new low speed USB device using ohci_hcd and address 2
usb 3-3: configuration #1 chosen from 1 choice
input: Dell Dell USB Keyboard as /class/input/input3
generic-usb 0003:413C:2003.0001: input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:12.0-3/input0
usb 4-1: new low speed USB device using ohci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
generic-usb 0003:051D:0002.0002: hiddev96: USB HID v1.10 Device [APC Back-UPS ES 350 FW:823.B1.D USB FW:B1] on usb-0000:00:12.1-1/input0
udev: renamed network interface eth0 to eth1
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: no MSI. Back to INTx.
eth0: RTL8168c/8111c at 0xf80b0000, 00:19:66:a2:17:aa, XID 3c4000c0 IRQ 18
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux video capture interface: v2.00
ohci1394 0000:03:07.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[febff800-febfffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
ivtv:  Start initialization, version 1.4.0
ivtv0: Initializing card #0
ivtv0: Autodetected Hauppauge card (cx23416 based)
ivtv 0000:03:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
cx2388x alsa driver version 0.0.6 loaded
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
tveeprom 0-0050: Hauppauge model 26582, rev C699, serial# 8784119
tveeprom 0-0050: tuner model is TCL 2002N 5H (idx 99, type 50)
tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 0-0050: audio processor is CX25843 (idx 37)
tveeprom 0-0050: decoder processor is CX25843 (idx 30)
tveeprom 0-0050: has no radio
ivtv0: Autodetected Hauppauge WinTV PVR-150
cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
tuner-simple 0-0061: creating new instance
tuner-simple 0-0061: type set to 50 (TCL 2002N)
ivtv0: Registered device video0 for encoder MPG (4096 kB)
ivtv0: Registered device video32 for encoder YUV (2048 kB)
ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
ivtv0: Registered device video24 for encoder PCM (320 kB)
ivtv0: Initialized card #0: Hauppauge WinTV PVR-150
cx88_audio 0000:03:05.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
cx88[0]: subsystem: 7063:5500, board: pcHDTV HD5500 HDTV [card=47,autodetected], frontend(s): 1
cx88[0]: TV tuner type 64, Radio tuner type -1
ivtv:  End initialization
tuner' 1-0043: chip found @ 0x86 (cx88[0])
tda9887 1-0043: creating new instance
tda9887 1-0043: tda988[5/6/7] found
tuner' 1-0061: chip found @ 0xc2 (cx88[0])
tuner-simple 1-0061: creating new instance
tuner-simple 1-0061: type set to 64 (LG TDVS-H06xF)
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
cx88[0]/2: cx2388x 8802 Driver Manager
cx88-mpeg driver manager 0000:03:05.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20
cx88[0]/2: found at 0000:03:05.2, rev: 5, irq: 20, latency: 32, mmio: 0xfb000000
cx8802_probe() allocating 1 frontend(s)
cx8800 0000:03:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
cx88[0]/0: found at 0000:03:05.0, rev: 5, irq: 20, latency: 32, mmio: 0xfd000000
cx88[0]/0: registered device video1 [v4l2]
cx88[0]/0: registered device vbi1
cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 7063:5500, board: pcHDTV HD5500 HDTV [card=47]
cx88[0]/2: cx2388x based DVB/ATSC card
tuner-simple 1-0061: attaching existing instance
tuner-simple 1-0061: type set to 64 (LG TDVS-H06xF)
tda9887 1-0043: attaching existing instance
DVB: registering new adapter (cx88[0])
DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)...
EXT3 FS on sda3, internal journal
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[008f130029270600]
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Unable to find swap-space signature
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
r8169: eth0: link up
r8169: eth0: link up
dmfe: Change Speed to 100Mhz full duplex
ivtv 0000:03:06.0: firmware: requesting v4l-cx2341x-enc.fw
ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039
cx25840 0-0044: firmware: requesting v4l-cx25840.fw
cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
hda-intel: Invalid position buffer, using LPIB read method instead.
smbfs is deprecated and will be removed from the 2.6.27 kernel. Please migrate to cifs
