Hi Erlance, You can add them to the init.rc script then init will do it each time you boot up. Here is some info on how this is done: http://www.kandroid.org/android_pdk/bring_up.html
<http://www.kandroid.org/android_pdk/bring_up.html>Good luck BR Lekanovic 2010/11/11 Earlence <earlencefe...@gmail.com> > I found the problem. > None of the modules were loaded. > So I insmod'd all based on the modules.order from the build. > Is there anyway to get this done automatically at boot up? > Also, none of the modules existed in the device. I manually > transferred them to the sdcard and insmod'd from there. > > Solutions/Suggestions welcome. > > Cheers, > Earlence > > On Nov 11, 2:12 pm, Earlence <earlencefe...@gmail.com> wrote: > > Hi, > > > > I have downloaded and built msm2.6.29 > > I also modded the msm_defconfig to allow module load/unload > > as well as netfilter config that is identical to the goldfish settings > > I used earlier. > > The build goes fine, and I obtain the zImage > > > > I then flash to mtd2 (HTC sapphire) and the boot up is correct. > > The phone is operational in all aspects. > > > > When I try to run iptables -L > > It tells me that the filter table could not be initialized. > > During the build, I saw that ALL netfilter modules necessary were > > built. > > > > What step have I missed here? since the exact same set of steps worked > > for goldfish. > > > > Cheers, > > Earlence > > -- > unsubscribe: > android-kernel+unsubscr...@googlegroups.com<android-kernel%2bunsubscr...@googlegroups.com> > website: http://groups.google.com/group/android-kernel > -- unsubscribe: android-kernel+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-kernel