NAND read: device 0 offset 0x280000, size 0x400000 4194304 bytes read: OK ## Booting kernel from Legacy Image at 80300000 ... Image Name: Linux-2.6.37-gd52c5bd Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2797496 Bytes = 2.7 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Linux version 2.6.37-gd52c5bd (root@rtsg1) (gcc version 4.3.2 (Sourcery G++ Lite 2008q3-72) ) #10 Wed Sep 12 16:07:46 IST 2012 CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache Machine: OMAP3 Beagle Board Reserving 8388608 bytes SDRAM for VRAM Memory policy: ECC disabled, Data cache writeback OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp 720mhz ) SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 62976 Kernel command line: console=ttyO2,115200n8 androidboot.console=ttyO2 mem=256M root=/dev/mtdblock4 rw rootfstype=jffs2 rootdelay=1 init=/init omap_vout.vid1_static_vrfb_alloc=y 6 PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 248MB = 248MB total Memory: 245144k/245144k available, 17000k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xffc00000 - 0xffe00000 ( 2 MB) vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB) lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .init : 0xc0008000 - 0xc003b000 ( 204 kB) .text : 0xc003b000 - 0xc0555000 (5224 kB) .data : 0xc0556000 - 0xc059c1c0 ( 281 kB) NR_IRQS:409 Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz Reprogramming SDRC clock to 332000000 Hz IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts Total of 96 interrupts on 1 active controller GPMC revision 5.0 Trying to install interrupt handler for IRQ402 Trying to install interrupt handler for IRQ403 Trying to install interrupt handler for IRQ404 Trying to install interrupt handler for IRQ405 Trying to install interrupt handler for IRQ406 Trying to install interrupt handler for IRQ407 Trying to install interrupt handler for IRQ408 Trying to install type control for IRQ409 Trying to set irq flags for IRQ409 OMAP clockevent source: GPTIMER1 at 32768 Hz Console: colour dummy device 80x30 Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok regulator: core version 0.5 regulator: dummy: NET: Registered protocol family 16 OMAP GPIO hardware version 2.5 OMAP GPIO hardware version 2.5 OMAP GPIO hardware version 2.5 OMAP GPIO hardware version 2.5 OMAP GPIO hardware version 2.5 OMAP GPIO hardware version 2.5 omap_mux_init: Add partition: #1: core, flags: 0 OMAP3 Beagle Rev: xM Found NAND on CS0 Registering NAND on CS0 Unable to get DVI reset GPIO hw-breakpoint: debug architecture 0x4 unsupported. OMAP DMA hardware revision 4.0 bio: create slab at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb omap_i2c omap_i2c.1: bus 1 rev3.12 at 2600 kHz twl4030: PIH (irq 7) chaining IRQs 368..375 twl4030: power (irq 373) chaining IRQs 376..383 twl4030: gpio (irq 368) chaining IRQs 384..401 regulator: VUSB1V5: 1500 mV normal standby regulator: VUSB1V8: 1800 mV normal standby regulator: VUSB3V1: 3100 mV normal standby twl4030_usb twl4030_usb: Initialized TWL4030 USB module regulator: VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby regulator: VDAC: 1800 mV normal standby regulator: VDVI: 1800 mV normal standby regulator: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby regulator: VAUX3: 1800 mV normal standby regulator: VAUX4: 1800 mV normal standby omap_i2c omap_i2c.2: bus 2 rev3.12 at 400 kHz omap_i2c omap_i2c.3: bus 3 rev3.12 at 100 kHz Advanced Linux Sound Architecture Driver Version 1.0.23. Switching to clocksource 32k_counter musb-hdrc: version 6.0, otg (peripheral+host), debug=0 musb-hdrc musb-hdrc.0: dma type: dma-inventra musb-hdrc musb-hdrc.0: USB OTG mode controller at fa0ab000 using DMA, IRQ 92 NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 NetWinder Floating Point Emulator V0.97 (double precision) platform iva.0: Enabled OPP corresponding to 720MHz omap-iommu omap-iommu.0: isp registered OMAP35x Linux PSP version 04.02.00.07 (OMAP3BEAGLE) ashmem: initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. JFS: nTxBlock = 1915, nTxLock = 15321 msgmni has been set to 478 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) OMAP DSS rev 2.0 OMAP DISPC rev 3.0 OMAP VENC rev 2 OMAP DSI rev 1.0 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0 omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1 omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2 console [ttyO2] enabled brd: module loaded loop: module loaded mtdoops: mtd device (mtddev=name/number) must be supplied omap2-nand driver initializing NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron ) Creating 5 MTD partitions on "omap2-nand.0": 0x000000000000-0x000000080000 : "X-Loader" 0x000000080000-0x000000260000 : "U-Boot" 0x000000260000-0x000000280000 : "U-Boot Env" 0x000000280000-0x000000680000 : "Kernel" 0x000000680000-0x000020000000 : "File System" OneNAND driver initializing usbcore: registered new interface driver asix usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver smsc95xx usbcore: registered new interface driver net1080 usbcore: registered new interface driver cdc_subset usbcore: registered new interface driver zaurus ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-omap.0 supply hsusb0 not found, using dummy regulator ehci-omap.0 supply hsusb1 not found, using dummy regulator ehci-omap ehci-omap.0: OMAP-EHCI Host Controller ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 ehci-omap ehci-omap.0: irq 77, io mem 0x48064800 ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: OMAP-EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.37-gd52c5bd ehci_hcd usb usb1: SerialNumber: ehci-omap.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. android init android_probe pdata: c05664d4 android_bind android_usb gadget: android_usb ready musb-hdrc musb-hdrc.0: MUSB HDRC host driver musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus number 2 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: MUSB HDRC host driver usb usb2: Manufacturer: Linux 2.6.37-gd52c5bd musb-hcd usb usb2: SerialNumber: musb-hdrc.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected f_adb init android_register_function adb f_mass_storage init fsg_probe pdev: c0566318, pdata: c056652c android_register_function usb_mass_storage adb_bind_config android_usb gadget: Mass Storage Function, version: 2009/09/11 android_usb gadget: Number of LUNs=1 lun0: LUN: removable file: (no medium) mice: PS/2 mouse device common for all mice input: gpio-keys as /devices/platform/gpio-keys/input/input0 input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1 using rtc device, twl_rtc, for alarms twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 twl_rtc twl_rtc: Power up reset detected. twl_rtc twl_rtc: Enabling TWL-RTC. i2c /dev entries driver Linux media interface: v0.10 Linux video capture interface: v2.00 omap3isp supply VDD_CSIPHY1 not found, using dummy regulator omap3isp supply VDD_CSIPHY2 not found, using dummy regulator omap3isp omap3isp: Revision 2.0 found omap-iommu omap-iommu.0: isp: version 1.1 usb 1-2: new high speed USB device using ehci-omap and address 2 usb 1-2: New USB device found, idVendor=0424, idProduct=9514 usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 1-2:1.0: USB hub found hub 1-2:1.0: 5 ports detected usb 1-2.1: new high speed USB device using ehci-omap and address 3 usb 1-2.1: New USB device found, idVendor=0424, idProduct=ec00 usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 smsc95xx v1.0.4 smsc95xx 1-2.1:1.0: usb0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc95xx USB 2.0 Ethernet, 02:5d:94:c6:31:23 omap_i2c omap_i2c.2: controller timed out mt9v113 2-003c: chip id mismatch read 0x0, expecting 0x2280 isp_register_subdev_group: Unable to register subdev mt9v113 OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec twl4030_wdt twl4030_wdt: Failed to register misc device twl4030_wdt: probe of twl4030_wdt failed with error -16 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: USB HID core driver logger: created 64K log 'log_main' logger: created 256K log 'log_events' logger: created 64K log 'log_radio' logger: created 64K log 'log_system' usbcore: registered new interface driver snd-usb-audio OMAP3 Beagle/Devkit8000 SoC init asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok ALSA device list: #0: omap3beagle oprofile: hardware counters not available oprofile: using timer interrupt. TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 NET: Registered protocol family 15 Registering the dns_resolver key type VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 ThumbEE CPU extension supported. Power Management for TI OMAP3. smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized SmartReflex Class3 initialized clock: disabling unused clocks to save power platform mpu.0: omap_voltage_scale: Already at the requestedrate 600000000 platform l3_main.0: omap_voltage_scale: Already at the requestedrate 166000000 platform iva.0: omap_voltage_scale: Already at the requestedrate 430000000 platform mpu.0: omap_voltage_scale: Already at the requestedrate 600000000 platform l3_main.0: omap_voltage_scale: Already at the requestedrate 166000000 regulator_init_complete: incomplete constraints, leaving VDAC on twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) omap_vout omap_vout: Buffer Size = 3686400 omap_vout omap_vout: : registered and initialized video device 15 omap_vout omap_vout: Buffer Size = 3686400 omap_vout omap_vout: : registered and initialized video device 16 Waiting 1sec before mounting root device... mtd->read(0x100 bytes from 0x1ac20000) returned ECC error mtd->read(0x1f8b8 bytes from 0x1ac20748) returned ECC error mtd->read(0x800 bytes from 0x1ac5f800) returned ECC error mtd->read(0x800 bytes from 0x1ac7f800) returned ECC error mtd->read(0x800 bytes from 0x1ac9f800) returned ECC error JFFS2 warning: (1) jffs2_sum_scan_sumnode: Summary node crc error, skipping summary information. mtd->read(0x100 bytes from 0x1ac80000) returned ECC error mtd->read(0x1f240 bytes from 0x1ac80dc0) returned ECC error jffs2_scan_inode_node(): CRC failed on node at 0x1ac98f10: Read 0xdb2acafc, calculated 0xfb2acafc jffs2_scan_inode_node(): CRC failed on node at 0x1ac9f510: Read 0x69e1149f, calculated 0xad3b73bc mtd->read(0x800 bytes from 0x1acbf800) returned ECC error mtd->read(0x80 bytes from 0x1acbf780) returned ECC error mtd->read(0x800 bytes from 0x1acdf800) returned ECC error mtd->read(0x800 bytes from 0x1ad1f800) returned ECC error JFFS2 warning: (1) jffs2_sum_scan_sumnode: Summary node crc error, skipping summary information. mtd->read(0x100 bytes from 0x1ad00000) returned ECC error mtd->read(0x1fcfc bytes from 0x1ad00304) returned ECC error jffs2_scan_inode_node(): CRC failed on node at 0x1ad11e00: Read 0x778abce6, calculated 0xb1850eae jffs2_scan_inode_node(): CRC failed on node at 0x1ad131dc: Read 0x86d039b8, calculated 0x869039b8 mtd->read(0x800 bytes from 0x1ad3f800) returned ECC error JFFS2 warning: (1) jffs2_sum_scan_sumnode: Summary node crc error, skipping summary information. mtd->read(0x100 bytes from 0x1ad20000) returned ECC error mtd->read(0x1fc24 bytes from 0x1ad203dc) returned ECC error jffs2_scan_eraseblock(): Node at 0x1ad22720 {0x1985, 0xe002, 0x00000761) has invalid CRC 0x0a14b294 (calculated 0x0a54b294) jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1ad22724: 0x0761 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1ad22728: 0xb294 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1ad2272c: 0x028e instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1ad22730: 0x0013 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1ad22734: 0x81ed instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1ad2273c: 0x0bb0 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1ad22740: 0x8759 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1ad22744: 0x8759 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1ad22748: 0x8759 instead Further such events for this erase block will not be printed jffs2_scan_inode_node(): CRC failed on node at 0x1ad3b0a4: Read 0xeaa06636, calculated 0x50638773 jffs2_scan_inode_node(): CRC failed on node at 0x1ad3c574: Read 0x71a28074, calculated 0x0ac159cc mtd->read(0x800 bytes from 0x1ad5f800) returned ECC error mtd->read(0x800 bytes from 0x1ad7f800) returned ECC error mtd->read(0x800 bytes from 0x1ad9f800) returned ECC error mtd->read(0x800 bytes from 0x1adbf800) returned ECC error mtd->read(0x800 bytes from 0x1addf800) returned ECC error mtd->read(0x800 bytes from 0x1adff800) returned ECC error mtd->read(0x800 bytes from 0x1ae1f800) returned ECC error mtd->read(0x800 bytes from 0x1ae3f800) returned ECC error mtd->read(0x800 bytes from 0x1ae5f800) returned ECC error mtd->read(0x800 bytes from 0x1ae7f800) returned ECC error mtd->read(0x800 bytes from 0x1ae9f800) returned ECC error mtd->read(0x800 bytes from 0x1aebf800) returned ECC error mtd->read(0x800 bytes from 0x1aedf800) returned ECC error mtd->read(0x800 bytes from 0x1aeff800) returned ECC error JFFS2 warning: (1) jffs2_sum_scan_sumnode: Summary node crc error, skipping summary information. mtd->read(0x100 bytes from 0x1aee0000) returned ECC error mtd->read(0x1f7e4 bytes from 0x1aee081c) returned ECC error jffs2_scan_eraseblock(): Node at 0x1aeff014 {0x1985, 0xe002, 0x00000d84) has invalid CRC 0xee628648 (calculated 0xe6628648) jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1aeff018: 0x0d84 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1aeff01c: 0x8648 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1aeff020: 0x0283 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1aeff024: 0x003d instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1aeff028: 0x81a4 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1aeff030: 0xad40 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1aeff034: 0x8754 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1aeff038: 0x8754 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1aeff03c: 0x8754 instead Further such events for this erase block will not be printed mtd->read(0x800 bytes from 0x1af1f800) returned ECC error mtd->read(0x800 bytes from 0x1af3f800) returned ECC error mtd->read(0x800 bytes from 0x1af5f800) returned ECC error mtd->read(0x800 bytes from 0x1af7f800) returned ECC error mtd->read(0x800 bytes from 0x1af9f800) returned ECC error mtd->read(0x800 bytes from 0x1afbf800) returned ECC error mtd->read(0x800 bytes from 0x1afdf800) returned ECC error mtd->read(0x800 bytes from 0x1afff800) returned ECC error mtd->read(0x800 bytes from 0x1b01f800) returned ECC error JFFS2 warning: (1) jffs2_sum_scan_sumnode: Summary node crc error, skipping summary information. mtd->read(0x100 bytes from 0x1b000000) returned ECC error mtd->read(0x1f9c8 bytes from 0x1b000638) returned ECC error jffs2_scan_eraseblock(): Node at 0x1b00ff94 {0x1985, 0xe002, 0x00003044) has invalid CRC 0x84d1586d (calculated 0xbc9c1e8d) jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1b00ff98: 0x3044 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1b00ff9c: 0x586d instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1b00ffa0: 0x0281 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1b00ffa4: 0x0118 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1b00ffa8: 0x81a4 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1b00ffb0: 0x3000 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1b00ffb4: 0x8751 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1b00ffb8: 0x8751 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1b00ffbc: 0x8751 instead Further such events for this erase block will not be printed mtd->read(0x800 bytes from 0x1b03f800) returned ECC error mtd->read(0x800 bytes from 0x1b05f800) returned ECC error mtd->read(0x800 bytes from 0x1b07f800) returned ECC error mtd->read(0x800 bytes from 0x1b09f800) returned ECC error JFFS2 warning: (1) jffs2_sum_scan_sumnode: Summary node crc error, skipping summary information. mtd->read(0x100 bytes from 0x1b080000) returned ECC error mtd->read(0x1f2d0 bytes from 0x1b080d30) returned ECC error mtd->read(0x800 bytes from 0x1b0bf800) returned ECC error mtd->read(0x800 bytes from 0x1b0df800) returned ECC error JFFS2 warning: (1) jffs2_sum_scan_sumnode: Summary node crc error, skipping summary information. mtd->read(0x100 bytes from 0x1b0c0000) returned ECC error mtd->read(0x1ff40 bytes from 0x1b0c00c0) returned ECC error mtd->read(0x800 bytes from 0x1b0ff800) returned ECC error mtd->read(0x20 bytes from 0x1b0ff7e0) returned ECC error mtd->read(0x800 bytes from 0x1b11f800) returned ECC error mtd->read(0x20 bytes from 0x1b11f7e0) returned ECC error mtd->read(0x800 bytes from 0x1b13f800) returned ECC error JFFS2 warning: (1) jffs2_sum_scan_sumnode: Summary node crc error, skipping summary information. mtd->read(0x100 bytes from 0x1b120000) returned ECC error mtd->read(0x1f8c8 bytes from 0x1b120738) returned ECC error jffs2_scan_inode_node(): CRC failed on node at 0x1b127914: Read 0x0ffaf989, calculated 0x0ffad989 jffs2_scan_inode_node(): CRC failed on node at 0x1b134034: Read 0xe69ed242, calculated 0xf1e5c601 jffs2_scan_inode_node(): CRC failed on node at 0x1b13db60: Read 0xc90cfbef, calculated 0x1414cd6d mtd->read(0x800 bytes from 0x1b15f800) returned ECC error mtd->read(0x800 bytes from 0x1b17f800) returned ECC error mtd->read(0x800 bytes from 0x1b19f800) returned ECC error mtd->read(0x800 bytes from 0x1b1bf800) returned ECC error mtd->read(0x800 bytes from 0x1b1df800) returned ECC error mtd->read(0x800 bytes from 0x1b1ff800) returned ECC error mtd->read(0x800 bytes from 0x1b21f800) returned ECC error mtd->read(0x800 bytes from 0x1b23f800) returned ECC error mtd->read(0x800 bytes from 0x1b25f800) returned ECC error mtd->read(0x800 bytes from 0x1b27f800) returned ECC error mtd->read(0x800 bytes from 0x1b29f800) returned ECC error mtd->read(0x800 bytes from 0x1b2bf800) returned ECC error mtd->read(0x800 bytes from 0x1b2df800) returned ECC error mtd->read(0x800 bytes from 0x1b2ff800) returned ECC error mtd->read(0x800 bytes from 0x1b31f800) returned ECC error mtd->read(0x800 bytes from 0x1b33f800) returned ECC error mtd->read(0x800 bytes from 0x1b35f800) returned ECC error mtd->read(0x800 bytes from 0x1b37f800) returned ECC error mtd->read(0x800 bytes from 0x1b39f800) returned ECC error mtd->read(0x800 bytes from 0x1b3bf800) returned ECC error JFFS2 warning: (1) jffs2_sum_scan_sumnode: Summary node crc error, skipping summary information. mtd->read(0x100 bytes from 0x1b3a0000) returned ECC error mtd->read(0x1fc74 bytes from 0x1b3a038c) returned ECC error jffs2_scan_inode_node(): CRC failed on node at 0x1b3b9e08: Read 0x1d055829, calculated 0x5a16aed2 mtd->read(0x800 bytes from 0x1b3df800) returned ECC error mtd->read(0x800 bytes from 0x1b3ff800) returned ECC error JFFS2 warning: (1) jffs2_sum_scan_sumnode: Summary node crc error, skipping summary information. mtd->read(0x100 bytes from 0x1b3e0000) returned ECC error mtd->read(0x1fbd4 bytes from 0x1b3e042c) returned ECC error jffs2_scan_inode_node(): CRC failed on node at 0x1b3f40b8: Read 0x9b723d58, calculated 0x2e904d68 mtd->read(0x800 bytes from 0x1b41f800) returned ECC error JFFS2 warning: (1) jffs2_sum_scan_sumnode: Summary node crc error, skipping summary information. mtd->read(0x100 bytes from 0x1b400000) returned ECC error mtd->read(0x1fc50 bytes from 0x1b4003b0) returned ECC error mtd->read(0x800 bytes from 0x1b43f800) returned ECC error mtd->read(0x800 bytes from 0x1b45f800) returned ECC error mtd->read(0x800 bytes from 0x1b47f800) returned ECC error mtd->read(0x800 bytes from 0x1b49f800) returned ECC error mtd->read(0x800 bytes from 0x1b4bf800) returned ECC error JFFS2 warning: (1) jffs2_sum_scan_sumnode: Summary node crc error, skipping summary information. mtd->read(0x100 bytes from 0x1b4a0000) returned ECC error mtd->read(0x1f500 bytes from 0x1b4a0b00) returned ECC error mtd->read(0x800 bytes from 0x1b4df800) returned ECC error mtd->read(0x800 bytes from 0x1b4ff800) returned ECC error mtd->read(0x800 bytes from 0x1b51f800) returned ECC error mtd->read(0x800 bytes from 0x1b53f800) returned ECC error mtd->read(0x800 bytes from 0x1b55f800) returned ECC error mtd->read(0x800 bytes from 0x1b57f800) returned ECC error mtd->read(0x800 bytes from 0x1b59f800) returned ECC error JFFS2 warning: (1) jffs2_sum_scan_sumnode: Summary node crc error, skipping summary information. mtd->read(0x100 bytes from 0x1b580000) returned ECC error mtd->read(0x1ef10 bytes from 0x1b5810f0) returned ECC error mtd->read(0x800 bytes from 0x1b5bf800) returned ECC error mtd->read(0x800 bytes from 0x1b5df800) returned ECC error mtd->read(0x800 bytes from 0x1b5ff800) returned ECC error mtd->read(0x800 bytes from 0x1b61f800) returned ECC error mtd->read(0x800 bytes from 0x1b63f800) returned ECC error JFFS2 warning: (1) jffs2_sum_scan_sumnode: Summary node crc error, skipping summary information. mtd->read(0x100 bytes from 0x1b620000) returned ECC error mtd->read(0x1fe1c bytes from 0x1b6201e4) returned ECC error jffs2_scan_eraseblock(): Node at 0x1b62d0cc {0x1985, 0xe002, 0x40001044) has invalid CRC 0x84d1586d (calculated 0xf20d19fd) jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1b62d0d0: 0x1044 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1b62d0d4: 0x586d instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1b62d0d8: 0x0279 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1b62d0dc: 0x0004 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1b62d0e0: 0x81a4 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1b62d0e8: 0x3000 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1b62d0ec: 0x8742 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1b62d0f0: 0x8742 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x1b62d0f4: 0x8742 instead Further such events for this erase block will not be printed mtd->read(0x800 bytes from 0x1b65f800) returned ECC error mtd->read(0x800 bytes from 0x1b67f800) returned ECC error mtd->read(0x800 bytes from 0x1b69f800) returned ECC error mtd->read(0x800 bytes from 0x1b6bf800) returned ECC error mtd->read(0x800 bytes from 0x1b6df800) returned ECC error mtd->read(0x800 bytes from 0x1b6ff800) returned ECC error mtd->read(0x800 bytes from 0x1b71f800) returned ECC error mtd->read(0x800 bytes from 0x1b73f800) returned ECC error JFFS2 warning: (1) jffs2_sum_scan_sumnode: Summary node crc error, skipping summary information. mtd->read(0x100 bytes from 0x1b720000) returned ECC error mtd->read(0x1fc4c bytes from 0x1b7203b4) returned ECC error mtd->read(0x800 bytes from 0x1b75f800) returned ECC error mtd->read(0x800 bytes from 0x1b77f800) returned ECC error mtd->read(0x800 bytes from 0x1b79f800) returned ECC error JFFS2 warning: (1) jffs2_sum_scan_sumnode: Summary node crc error, skipping summary information. mtd->read(0x100 bytes from 0x1b780000) returned ECC error