Hello Benito,
I suggest to specify which span to be used as the clock source (check
http://lists.digium.com/pipermail/svn-commits/2005-October/007955.html)
span=1,1,0,ccs,hdb3,crc4
bchan=25-39,41-55
dchan=40
span=2,0,0,ccs,hdb3,crc4
bchan=56-70,72-86
dchan=71
HTH
Best regards,
## nini @ www.modulo.ro ##
younss azzayani wrote:
Hi,
if no cable is connected you'll get the red alarm
can you tell me the schema of your corssover cable.
try yo connect the 2 slot"s berween them and make internal calls(i 'm
not sure of this option but somemone called shimi has asked me if i
have 2 TE110P to test if my cable & my config are ok)
i hope this will be helpful, i still a newbie :)
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users