Hi All, I would appreciate a lot if you could help me. I have installed Asterisk 1.4.1 and zaptel 1.4.2 on my redhat enterprise linux 4. I have also installed 1 FXO port card: Digium TDM400P. After loading zaptel driver I could see my digium card's led glow green. Tested with zttool that its in OK state. I have configured fxsks=4 in zaptel.conf(channel 4 cause FXO module is on port 4). I have also configured channel 4 in incoming context in zapata.conf.
After all configuration I started asterisk with vvvvvgc and made a call, but I didn't see any call log on asterisk console. When I did core show channels its showing 0 active channels. Looks like I did something wrong in my config. Also I dont see red-alarm in zttool if I take out pstn line. I have taken pstn line from my Vonage adapter and connecting that to my digium card. Any help will be appreciated. Regards, Vijay Gaur
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
