Hi, > -----Original Message----- > >- Sometimes a call won't go through, dialtone stays on after > keypresses. > >Strange. A powercycle of the iaxy usually helps > > Are you changing which phone is plugged into the iaxy before > this happens? The changing of resistance levels I have > noticed to cause this occasionally.
Nope, no changes in the phone connection. By the way, what does this mean: -- Accepted AUTHENTICATED TBD call from <ip> > > >- No support for hookflash transfers (will this be possible ??) > > > > > > > > There is most definately support for flashhook transfers. > Hit Flash, then #, then dial the number you're' transferring > to. I've done this for awhile now, and it works fine. Can you show your IAXy provisioning config ? This doesn't do anything with my setup. > Make sure you're running revision 14 of the firmware. type > iax2 show firmware from the cli to see which firmware you > have on your asterisk > system. If it's not the latest, i reccomend doing a cvs update to > latest -HEAD . If you're not running HEAD this is futile. > Also, to see which version of firmware you have on the iaxy, > do an iax2 debug, and watch for the iaxy's talk, it will tell > you what firmware revision it's running. I did, and I can confirm the IAXy is running version 14. Florian _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users