On Sun, 28 Oct 2007 01:39:53 +0200 Evgeni Golov wrote: > On Sun, 28 Oct 2007 00:47:18 +0300 Nick Kossifidis wrote: > > > That seems realy weird, i have the same mac/phy revision as you > > (5.6/4.1) and it works ok. Can you try to reload ath5k module and see > > if it wakes up ? > > rmmod + modprobe give me: > ACPI: PCI interrupt for device 0000:03:00.0 disabled > ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKA] -> GSI 11 (level, > low) -> IRQ 11 phy3: Selected rate control algorithm 'simple' > ath5k_pci 0000:03:00.0: AR5212 chip found: mac 5.6 phy 4.1
Mh, just a thought: Could it be because my card is bg only? lspci says AR5212 802.11abg, so does linuxwireless.org, but when I load madwifi (which btw does not compile against wireless-2.6 git), only b and g rates are reported: wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps and the same applies for "iwlist wlan0 channel" Greets Evgeni _______________________________________________ ath5k-devel mailing list ath5k-devel@lists.ath5k.org https://lists.ath5k.org/mailman/listinfo/ath5k-devel