On 10/27/07, Nick Kossifidis <[EMAIL PROTECTED]> wrote:
> * Give more infos about mac/phy/radio revision during attach.
> @@ -535,10 +568,24 @@ ath5k_pci_probe(struct pci_dev *pdev,
> if (ret)
> goto err_ah;
>
> - dev_info(&pdev->dev, "%s chip found: mac %d.%d phy %d.%d\n",
> - ath5k_chip_name(id->driver_data),
> sc->ah->ah_mac_version,
> - sc->ah->ah_mac_revision, sc->ah->ah_phy_revision >> 4,
> - sc->ah->ah_phy_revision & 0xf);
> + dev_info(&pdev->dev, "Atheros AR%s chip found: MAC 0x%x, PHY: 0x%x\n",
> + ath5k_chip_name(AR5K_VERSION_VER,sc->ah->ah_mac_srev),
> + sc->ah->ah_mac_srev,
> + sc->ah->ah_phy_revision);
> +
> + if(sc->ah->ah_radio_5ghz_revision && !sc->ah->ah_radio_2ghz_revision){
> + dev_info(&pdev->dev, "RF%s radio found (0x%x)\n",
> +
> ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
> + sc->ah->ah_radio_5ghz_revision);
> + } else if(sc->ah->ah_radio_5ghz_revision &&
> sc->ah->ah_radio_2ghz_revision){
> + dev_info(&pdev->dev, "RF%s 5GHz radio found (0x%x)\n",
> +
> ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
> + sc->ah->ah_radio_5ghz_revision);
> + dev_info(&pdev->dev, "RF%s 2GHz radio found (0x%x)\n",
> +
> ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_2ghz_revision),
> + sc->ah->ah_radio_2ghz_revision);
> + }
> +
>
> /* ready to process interrupts */
> __clear_bit(ATH_STAT_INVALID, sc->status);
>
I have ACK'd this as I believe its a lot more useful information than
what we had before but I am confused by what some different prints may
yield. For example, on AR5213, I get:
ath5k_pci 0001:11:02.0: Atheros AR5213 chip found: MAC 0x56, PHY: 0x41
ath5k_pci 0001:11:02.0: RF5111 5GHz radio found (0x17)
ath5k_pci 0001:11:02.0: RF2111 2GHz radio found (0x23)
On my Cardbus card, I then get:
ath5k_pci 0000:15:00.0: Atheros AR5213A chip found: MAC 0x59, PHY: 0x43
ath5k_pci 0000:15:00.0: RF5112A radio found (0x36)
Now, both are capable of 2 GHz and 5 GHz though and only one prints a
line which shows the type of RF both for 2 GHz and 5 GHz. Essentially
my ah_radio_2ghz_revision is 0x00 for that card. What exactly does
having a print for both RFs here indicate besides the fact we are
indicating the type of radio and revision? And in the Cardbus card I
have where only one RF line is printed what does that indicate?
Luis
_______________________________________________
ath5k-devel mailing list
ath5k-devel@lists.ath5k.org
https://lists.ath5k.org/mailman/listinfo/ath5k-devel
