[please don't top post] On Thu, Jun 24, 2010 at 02:25:34PM +0800, Jin YunYe wrote: > I am a bit curious on the CTS/RTS/ACK part. > > I tried to printk out (in ath5k_intr() ) the received frame type while > I am pinging a wireless router using my atheros card at the same time. > However, I cannot see any ACK packet received by my card from the > router. Is it because both TX and RX of ACK/RTS/CTS are completely > handled by the hardware so that the RX of an ACK does not even raise > ath5k_intr()?
The hardware handles it completely so you won't get an rx interrupt for these packets. But you will get TX completion interrupt for the packet that is being ACKed when the ACK is received, and the tx status will indicate success or failure. -- Bob Copeland %% www.bobcopeland.com _______________________________________________ ath5k-devel mailing list ath5k-devel@lists.ath5k.org https://lists.ath5k.org/mailman/listinfo/ath5k-devel