Hi all,
I have a problem with the athk5 driver and this scheme. Description of scheme
and the problem is as follows:
Specifications
Linux Kernel: Linux voyage 3.0.0-voyage
Ath5k modules:
filename:
/lib/modules/3.0.0-voyage/kernel/drivers/net/wireless/ath/ath5k/ath5k.ko
license: Dual BSD/GPL
description: Support for 5xxx series of Atheros 802.11 wireless LAN cards.
Modules ath5k
ath5k, ath, mac80211, cfg80211
NIC models: CM9-GP
Chipset: Atheros AR5213A
Standard: 805.11a/b/g
bitrate: 6Mbps
Scheme:
I use 2 ALIX boards, each of them have two NICs installed. The scheme is as
follows:
ALIX_0 ALIX1 ESSID CHANNEL
NIC_1: 192.168.0.1 NIC_1: 192.168.0.2 ESSID1 1
NIC_2: 192.168.10.1 NIC_2: 192.168.10.2 ESSID2 11
Two links linked up using infraestructure, mesh or ad-hoc mode.
I insert traffic between NIC_1(ALIX0) and NIC_1(ALIX1) in ESSID1, and I get a
5Mbps throughput, I did the same test with the link ESSID 2 and results were
similar.
The problem is when I try to send data simultaneously using both two links I
only get a 5Mbps throughput, this means I only get a single link throughput
even when the traffic is sent using both channels.
I did a similar testing with madwifi driver, and I am able to send data
simultanously, but I need to use ath5k driver, because bonding implementation
is much better for wireless networks.
Could you please help me with this?
Many thanks in advance.
Kind regards,
Geovana
Geovana Navarro
Dios te Bendiga
Solo Cristo Jesus puede darte Amor verdadero, entregale tu corazon.
_______________________________________________
ath5k-devel mailing list
ath5k-devel@lists.ath5k.org
https://lists.ath5k.org/mailman/listinfo/ath5k-devel
