Fixed it long back, but din't have time to say thanks ! - Abhinav
On Mon, Feb 17, 2014 at 3:16 PM, Mathy <vanho...@gmail.com> wrote: > Hi, > > Disclaimer: I have no experience with the ath5k driver. That said, to > debug the issue you can create a debugfs entry to read the current value of > the register. Then you can double check that you're correctly writing to > it, and that no other code is overwriting your changes. Doing that might > indicate where the problem is, or hopefully give you new ideas to fix the > problem. > > - Mathy > > > On Mon, Feb 17, 2014 at 6:41 PM, abhinav narain <abhinavnarai...@gmail.com > > wrote: > >> Hi, >> There is a AR5K_DIAG_SW_5211 register in ath5k codebase (in reg.h) . >> I am using AR5212 NIC and even if I set all the bits of diagnostic >> register to be zero, >> my wireless works correctly. >> I wanted to know if I have to set some other things in the codebase in >> order for changes made in this register to work ? >> In particular I wanted to change AR5K_DIAG_SW_CORR_FCS_5211 >> so that I can test if I can transmit error frames but it doesn't work. >> I am still able to connect to AP and get traffic. >> >> Please suggest. >> >> Thanks, >> Abhinav >> >> >> _______________________________________________ >> ath5k-devel mailing list >> ath5k-devel@lists.ath5k.org >> https://lists.ath5k.org/mailman/listinfo/ath5k-devel >> >> >
_______________________________________________ ath5k-devel mailing list ath5k-devel@lists.ath5k.org https://lists.ath5k.org/mailman/listinfo/ath5k-devel