Eric, The Lavry is built for Professional balanced operation. The volume control is used to control output levels, and if used, the headphone level:
Quoting Lavry manual: AES/EBU professional levels Volume set to 56 in balanced = 34.72V peak to peak (12.28 V rms) Volume set to 56 in unbalanced = 17.36 V peak to peak (6.14 V rms) Volume set to 40 in balanced = 5.6V peak to peak (2 V rms) Volume set to 46 in unbalanced = 5.6 V peak to peak (2 V rms) These numbers are equivalent to typical CD player outputs (although are high compared to many other hifi sources. The range is 1dB per step on the control. Every 6dB halves the voltage. The final step 01 to 00 is infinite. For eample range on headphone output is -35dBu to + 20dBu. This is very nice as a precision attenuator. Hope that helps. Regards Dave SB3>LavryDA10 (unbalanced)>Cyrus8vs>AcapellaSE (homebuilt dipoles) -- DaveWr ------------------------------------------------------------------------ DaveWr's Profile: http://forums.slimdevices.com/member.php?userid=9331 View this thread: http://forums.slimdevices.com/showthread.php?t=32929 _______________________________________________ audiophiles mailing list audiophiles@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/audiophiles