achri-d, I have been doing some testing just now with version 33 firmware and I am able to sync with any word clock frequency from 1KHz to 100KHz. I can also vary the frequency, unplug and re-plug the cable, or even set it to rapidly sweep a wide range of frequencies (that sounds really weird!) but it always stays synced.
There are a number of documented bugs that I am currently working on related to the audio logic, but I don't think any of them are related to the symptoms you are describing. I really think you have some issue on the DAC side, because Transporter doesn't know or care what frequency is coming into its word clock input... it will just run at whatever rate it is fed and doesn't do anything different for 44.1 vs 48. Of course it is possible for a bug to manifest at one clock frequency and not another, but I am not seeing that behavior on our end. Where to go next depends on the result of the test I mentioned in the previous post: > A further test you could do would be to put the DAC into slave (normal > s/pdif clock) mode, and verify that it is able to play the s/pdif > signal coming from the Transporter while the Transporter is being fed > by the 48KHz external clock. But I am running out of ideas... -- seanadams ------------------------------------------------------------------------ seanadams's Profile: http://forums.slimdevices.com/member.php?userid=3 View this thread: http://forums.slimdevices.com/showthread.php?t=39770 _______________________________________________ audiophiles mailing list audiophiles@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/audiophiles