bhaagensen;291675 Wrote: > I've decided I want to have a go at eliminating the 8000S and running > the TP directly via RCA to the 8000P. One problem is I don't know the > gain and sensitivity of the 8000P. > > Does anybody know if the data for the old ones are the same? I tried > google but it isn't always clear whether its the new or old ones being > refered to. And I don't want to blow up anything. Can't help you with the 8000P data you're looking for, but it's not actually necessary to know it.
1. Connect the TP directly to the 8000P. 2. Before powering up the 8000P, turn the volume right down on the TP. 3. Now switch on the 8000P, and start playing something. 4. Gradually increase the volume on the TP until you achieve the loudest playback you're ever likely to want. (If you get to full volume and it's not loud enough, you need an active preamp). 5. Note the dB attenuation reported on the TP's display. This is the amount of attenuation you need. 6. Power everything down, open up the TP and set the internal attenuation accordingly. Provided you make sure you start with the volume right down, you'll be fine. -- cliveb Transporter -> ATC SCM100A ------------------------------------------------------------------------ cliveb's Profile: http://forums.slimdevices.com/member.php?userid=348 View this thread: http://forums.slimdevices.com/showthread.php?t=46329 _______________________________________________ audiophiles mailing list audiophiles@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/audiophiles
