Hi, i have a custom cape for which i programmed the eeprom with the right formated content and a custom device tree file with the also the correct content. I tried the dts file by compiling it with dtc and loading it manually and it works fine, but when i try to load it at boot i get the following message :
[ 1.752440] bone-capemgr bone_capemgr.9: slot #0: 'BB-BONE-LOGIBONE,00R1,VALENTFX,BB-BONE-LOGIBONE' [ 1.963974] bone-capemgr bone_capemgr.9: loader: before slot-0 BB-BONE-LOGIBONE:00R1 (prio 0) [ 1.972929] bone-capemgr bone_capemgr.9: loader: check slot-0 BB-BONE-LOGIBONE:00R1 (prio 0) [ 2.019182] bone-capemgr bone_capemgr.9: loader: after slot-0 BB-BONE-LOGIBONE:00R1 (prio 0) [ 2.049292] bone-capemgr bone_capemgr.9: slot #0: Requesting part number/version based 'BB-BONE-LOGIBONE-00R1.dtbo [ 2.080465] bone-capemgr bone_capemgr.9: slot #0: Requesting firmware 'BB-BONE-LOGIBONE-00R1.dtbo' for board-name 'BB-BONE-LOGIBONE', version '00R1' [ 2.833633] bone-capemgr bone_capemgr.9: failed to load firmware 'BB-BONE-LOGIBONE-00R1.dtbo' [ 2.842632] bone-capemgr bone_capemgr.9: loader: failed to load slot-0 BB-BONE-LOGIBONE:00R1 (prio 0) i read that it the problem could be with the eMMC hosting the /lib/firmware and not being mounted at the time the kernel need it, but i run everything from sd card and the sd card is mounted when capemngr tries to load the file. I have no clue of what the problem is ... Thanks for your help. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.