Hi all! I am trying to use the images found in this link: http://dominion.thruhere.net/angstrom/nightlies/v2013.12/beagleboard/ which are nightlies builds of Angstrom. I am trying to use them in a Beagleboard xM rev C. U-Boot boots just fine, but, when it is supposed to load and boot kernel, it halts. The dump of console follows bellow. Thanks in advance!
U-Boot 2011.09-01172-gfdbe8b9-dirty (Apr 15 2014 - 20:03:14) OMAP3630/3730-GP ES1.2, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz OMAP3 Beagle board + LPDDR/NAND I2C: ready DRAM: 512 MiB WARNING: Caches not enabled NAND: 0 MiB MMC: OMAP SD/MMC: 0 *** Warning - readenv() failed, using default environment In: serial Out: serial Err: serial Beagle xM Rev C No EEPROM on expansion board I2C read: I/O error Unrecognized expansion board: 0 Die ID #625a00029ff800000163810c1202401d Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 0 The user button is currently NOT pressed. SD/MMC found on device 0 reading uEnv.txt 128 bytes read Loaded environment from uEnv.txt Importing environment from mmc ... Loading file "/boot/uImage" from mmc device 0:2 (xxa2) 4335448 bytes read Booting from mmc ... ## Booting kernel from Legacy Image at 80200000 ... Image Name: Linux-3.2.28 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4335384 Bytes = 4.1 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.