By the way: your own link contains the information that MMC is not supported: http://processors.wiki.ti.com/index.php/StarterWare_MMCSD_Driver#Features_not_supported ;-)
Am Dienstag, 28. Oktober 2014 05:23:22 UTC+1 schrieb Jason Kridner: > > On Mon, Oct 27, 2014 at 5:16 AM, <karlka...@gmail.com <javascript:>> > wrote: > >> Starterware does not support access to eMMC. To do that, you would have >> to implement MMC-support to their HSMMCSD-library in order to make MLO able >> to boot APPs from there. >> > > Have you done anything to confirm what you are saying? It would be helpful > to say when you suspect something vs. when you know something. > > Neither the bootloader is in ROM nor the MLO app make any use of > Starterware, so if Starterware supports eMMC or not is irrelevant to if you > can boot a Starterware application from eMMC using the ROM and MLO. There's > no reason you couldn't skip MLO entirely unless your Staterware image is > particularly large. If you want to use MLO, again, there's no reason that > couldn't target a Starterware application. > > Also, as far as I know, MMC-support is not required to use an eMMC as it > should support one of the other modes. > > [1] http://processors.wiki.ti.com/index.php/StarterWare_MMCSD_Driver > [2] http://processors.wiki.ti.com/index.php/StarterWare_MMC > > >> >> Am Donnerstag, 16. Oktober 2014 22:28:31 UTC+2 schrieb TheMdv18: >> >>> Hi everybody, >>> My question is, I can boot starterware examples in flash EMMC (MLO+app), >>> I did this in uSD card, but want to use the USB or Serial to flash EMMC >>> and boot my application. >>> There is anyway to do this ? >>> >>> >>> Thanks in advance. >>> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard...@googlegroups.com <javascript:>. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
