Thank you! Patched our custom kernel successfully with those patches. For
some reason I could not for the life of me track down what had changed.

On Fri, Oct 13, 2017 at 8:32 PM, Robert Nelson <robertcnel...@gmail.com>
wrote:

> On Fri, Oct 13, 2017 at 3:00 PM,  <eccsimm...@gmail.com> wrote:
> > I have an older BBB that is flashing just fine from my SD (3.8 kernel
> img).
> > When I put this same SD into a newer BBB it fails to flash because
> mmcblk1
> > doesn't exist. So I disabled the emmc flash script at the end of
> uEnv.txt,
> > and did an lsblk. Sure enough there is no emmc enabled, or at least
> mmcblk1
> > is not seen/mounted.
> >
> > The SD card is unchanged from one device to another, and the only thing I
> > can see that's different is the newer one seems to be running U-Boot
> > 2016.11-rc3-00002-g73df7f7, as apposed to the older one running U-Boot
> > 2015.01.
> >
> > If I grab a newer image (4.4) and put it on the SD, it works fine. The
> issue
> > is, I need to keep 3.8 for the time being, and I need it to properly
> enable
> > the emmc.
> >
> > Anyone run into this type of issue? Any advice would be amazing! Thank
> you.
>
> This was fixed in 3.8.13-bone80, which is the "first" 3.8.13 kernel to
> support eMMC5.1..
>
> It's not any issue in any other kernel branches.
>
> If you "MUST" have a specific 3.8.13 version follow these directions:
>
> https://gist.github.com/RobertCNelson/39faf80ddc9fcefae74dce2c6ca2eb45
>
> and rebuild it yourself.. ;)
>
> Regards,
>
> --
> Robert Nelson
> https://rcn-ee.com/
>



-- 
*Sincerely,*
*Gary Simmons*

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CAG5gR-KYTVPwD-mNuNq82s%2BmrKbYg4%2BPcH2oLGNFkruejyPS9g%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to