Hello, *journalctl -xe:*
*Mar 04 22:13:41 beaglebone rtapi:0[5253]: unload: '' not loaded* *Mar 04 22:13:41 beaglebone rtapi:0[5253]: unload: '' not loaded* *Mar 04 22:13:41 beaglebone msgd:0[5248]: rtapi_app exit detected - scheduled shutdown* *Mar 04 22:13:43 beaglebone msgd:0[5248]: msgd shutting down* *Mar 04 22:13:53 beaglebone dnsmasq-dhcp[1479]: DHCPREQUEST(usb0) 192.168.34.34 68:9e:19:8f:5f:27* *Mar 04 22:13:53 beaglebone dnsmasq-dhcp[1479]: DHCPACK(usb0) 192.168.34.34 68:9e:19:8f:5f:27 AltTiger* *Mar 04 22:14:45 beaglebone rtapi:0[5625]: 1:rtapi_app:5625:user load(sim_home_switch): sim_home_switch.so: cannot open shar* *Mar 04 22:14:45 beaglebone msgd:0[5620]: hal_lib:5644:user get_elf_section(/usr/lib/machinekit/modules/sim_home_switch.so,* *Mar 04 22:14:45 beaglebone rtapi:0[5625]: do_load_cmd: sim_home_switch.so: cannot open shared object file: No such file or* *Mar 04 22:14:45 beaglebone rtapi:0[5625]: 1:rtapi_app:5625:user do_load_cmd: sim_home_switch.so: cannot open shared object* *Mar 04 22:14:52 beaglebone rtapi:0[5625]: unload: '' not loaded* *Mar 04 22:14:52 beaglebone rtapi:0[5625]: unload: '' not loaded* *Mar 04 22:14:52 beaglebone rtapi:0[5625]: unload: '' not loaded* *Mar 04 22:14:52 beaglebone rtapi:0[5625]: unload: '' not loaded* *Mar 04 22:14:52 beaglebone rtapi:0[5625]: unload: '' not loaded* *Mar 04 22:14:52 beaglebone rtapi:0[5625]: unload: '' not loaded* *Mar 04 22:14:53 beaglebone msgd:0[5620]: rtapi_app exit detected - scheduled shutdown* *Mar 04 22:14:55 beaglebone msgd:0[5620]: msgd shutting down* *dmesg:* *...* *timer_probe: no matching timers found* *l4_wkup_cm:clk:0010:0: failed to disable* *OF: graph: no port node found in /ocp/lcdc@4830e000OF: graph: no port node found in /ocp/lcdc@4830e000OF: graph: no port node found in /ocp/lcdc@4830e000* *omap_voltage_late_init: Voltage driver support not added* *...* Those are my short logs where I found some issues w/ these items: - BeagleBone Green - 5" Seeed LCD Cape - LinuxCNC/EMCApplication/Axis So, when I run the command, *linuxcnc*, everything is in order. The GUI comes up, the options are there on my LCD panel, and only when I double click on *axis *does this error happen. The error points to a specific error code on my LCD Panel. It is a 5" LCD and the file that pops up will not allow me to save it. If this is a BBG issue, okay, I will stay w/ this thread for a while. If it is a linuxcnc/EMCApplication issue, I will go the other way and revisit machinekit on the google groups and their chat(s). Seth P.S. Send rations! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/01262941-a662-4c99-919e-545659770eccn%40googlegroups.com.