Because the lab told you so? ;-) I mean, you don't have to do it, but you should if you want to get the points ;-)
-- Marko Milivojevic - CCIE #18427 (SP R&S) Senior CCIE Instructor / Managing Partner - IPexpert On Mon, Aug 12, 2013 at 2:50 AM, Jonathan Major <[email protected]> wrote: > OK, so I was going through the multicast section of Lab 5, and I reach task > 4.4, the last bullet point "You are required to configure BGP for this > task." > > ... Why lol? Since the previous tasks 4.3 and 4.2 both stated to enable PIM > on all interfaces of all routers in their respective AS (just to filter RP > info from leaking)... R7 and R8 are PIM neighbors. So, multicast pings work > just fine. Well, I'm wide open for critique now someone please verbally > punch me in the face. > > > -- > Jonathan Major > Network Engineer > [email protected] <[email protected]> > ======================= > CCNP;MCITP;MCSA > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
