AIM-CUE / NM-CUE doesn't really matter.
Difference of flash-based 'hdd' or actual 2.5" hdd. and a difference
of how many ports it supports.
no difference in software for the version on the lab.
so if you can - I would say exchange the NM-CUE for the AIM-CUE.
Cheers,
--
Mark Snow
CCIE #14073 (Voice, Security)
Senior Technical Instructor - IPexpert, Inc.
Telephone: +1.810.326.1444
Fax: +1.309.413.4097
Mailto: [EMAIL PROTECTED]
--
Join our free online support and peer group communities:
http://www.IPexpert.com/communities
--
IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-
Demand and Audio Certification Training Tools for the Cisco CCIE R&S
Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and
CCIE Storage Lab Certifications.
--
On Jun 4, 2008, at 1:44 PM, Gierula, Christopher E wrote:
If I Go to the AIM CUE then again, not what is in the Lab. I guess
it is
a trade off on which piece is more important to the big picture. How I
configure my DSP's or How I configure the CUE.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Mark Snow
Sent: Wednesday, June 04, 2008 1:34 PM
To: OSL CCIE Voice Lab Exam
Subject: Re: [OSL | CCIE_Voice] lab equipments
Not sure what that means: "My problem is that I have a CUE mod
installed, that is why I thought that I could use the AIM-Voice-30"
Could you explain how having CUE is seemingly a problem?
Oh wait - I think I just got it - you have a NM-CUE not an AIM-CUE.
Got it.
Hmm - you could probably sell the NM-CUE (higher end - more ports) and
buy an AIM-CUE to fix the issue...?
--
Mark Snow
CCIE #14073 (Voice, Security)
Senior Technical Instructor - IPexpert, Inc.
Telephone: +1.810.326.1444
Fax: +1.309.413.4097
Mailto: [EMAIL PROTECTED]
--
Join our free online support and peer group communities:
http://www.IPexpert.com/communities
--
IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-
Demand and Audio Certification Training Tools for the Cisco CCIE R&S
Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and
CCIE Storage Lab Certifications.
--
On Jun 4, 2008, at 12:37 PM, Gierula, Christopher E wrote:
I have a few nm-hdv's with 2 PVDM-12's each. My problem is that I
have
a CUE mod installed, that is why I thought that I could use the
AIM-Voice-30. 2811's nice but expensive.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Mark
Snow
Sent: Wednesday, June 04, 2008 12:10 PM
To: OSL CCIE Voice Lab Exam
Subject: Re: [OSL | CCIE_Voice] lab equipments
Hi Chris,
Honestly - you don't want to use either. AIM-VOICE-30 - while a nice
concept - was mostly a headache (read:disaster) in the field. Not to
mention it is not the hardware in the lab - so your testing results
WILL vary a lot from the mileage you would get from the lab
equipment.
AIM-ATM-VOICE-30 was the AIM-Voice with ATM AAL2/5 support - nothing
that is in the lab.
If you have 26xxXM routers - you really need to invest in NM-HDVs
with
DSPs enough to support a few channels for T1 or E1. You DON'T need
enough dsps to light all channels - just a waste unless in
production.
No need to buy more expensive NM-HDV2s. If you had 28xx's then you
can
put DSPs directly onto the motherboard to support VWIC-MFTs right in
the VWIC slots.
Cheers,
--
Mark Snow
CCIE #14073 (Voice, Security)
Senior Technical Instructor - IPexpert, Inc.
Telephone: +1.810.326.1444
Fax: +1.309.413.4097
Mailto: [EMAIL PROTECTED]
--
Join our free online support and peer group communities:
http://www.IPexpert.com/communities
--
IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-
On-
Demand and Audio Certification Training Tools for the Cisco CCIE R&S
Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab
and
CCIE Storage Lab Certifications.
--
On Jun 4, 2008, at 11:19 AM, Gierula, Christopher E wrote:
Hi,
I am also building my own lab and have been following this thread
and
I have a question. I have 2611xm for branch 2 with max mem, CUE mod
and I am adding a 1MFT-E1. I am little confused by the documentation
on the Cisco web site. Apparently the AIM ATM Voice 30 In order to
use the E1 for voice I need either a AIM Voice 30 or an AIM ATM
Voice
30. Would either work or should I use the AIM Voice 30.
Chris G.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
] On Behalf Of Stephen Collinson
Sent: Wednesday, June 04, 2008 10:10 AM
To: 'OSL CCIE Voice Lab Exam'
Subject: Re: [OSL | CCIE_Voice] lab equipments
Hi,
I am a big fan of the online labs however I prefer to run my own lab
for most things.
If you want details mail me off line and I'll be happy to help.
HTH
S
________________________________________
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Marwa
Ahmed
Sent: 28 May 2008 23:03
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] lab equipments
hello,
I have just passed my voice written exam, and i am preparing for the
lab, i need the list of all equipments that i will use in lab
