Hi All, 1. I have CUE installed on Branch 2. From the BR2 I am able to ping the service engine ip address.
>From the HQ I am unable to ping the IP of the service engine module. Is this the way it works or have I made a mistake? 2. CATOS. Presently the CAt6503 has ios installed on this. Can I boot to a flash disk to boot CATOS. And then remove the disk and it boots as it currently does? e.g. Like on a pc when you boot to a USB with linux and without the USB it boots to Windows . Thank you Suresh __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
br2(config)#exit br2#show Oct 20 09:44:43.495: %SYS-5-CONFIG_I: Configured from console by consolerun Building configuration... Current configuration : 3635 bytes ! ! Last configuration change at 04:44:43 br2 Mon Oct 20 2008 ! NVRAM config last updated at 17:11:18 br2 Wed Oct 15 2008 ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname br2 ! boot-start-marker boot-end-marker ! card type t1 0 1 ! no aaa new-model clock timezone br2 -5 network-clock-participate wic 1 ! ! ip cef no ip dhcp use vrf connected ! ip dhcp pool ITS network 10.10.31.0 255.255.255.0 option 150 ip 10.10.31.254 default-router 10.10.31.254 ! ! ! isdn switch-type primary-net5 ! voice-card 0 no dspfarm ! ! ! ! ! ! voice class h323 1 h225 timeout tcp establish 3 ! ! ! ! ! ! ! ! ! ! ! controller T1 0/1/0 framing esf linecode b8zs pri-group timeslots 1-5,24 ! controller T1 0/1/1 framing esf linecode b8zs ! ! ! ! ! ! interface Loopback0 ip address 1.1.1.31 255.255.255.0 h323-gateway voip bind srcaddr 1.1.1.31 ! interface FastEthernet0/0 ip address 10.10.31.254 255.255.255.0 duplex auto speed auto ! interface Service-Engine0/0 ip unnumbered Loopback0 service-module ip address 1.1.1.32 255.255.255.0 service-module ip default-gateway 1.1.1.31 ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0 no ip address encapsulation frame-relay frame-relay lmi-type ansi ! interface Serial0/0/0.1 point-to-point ip address 192.168.11.2 255.255.255.252 frame-relay interface-dlci 206 ! interface Serial0/0/1 no ip address shutdown clock rate 2000000 ! interface Serial0/1/0:23 no ip address encapsulation hdlc isdn switch-type primary-net5 isdn incoming-voice voice isdn sending-complete no cdp enable ! router ospf 1 router-id 1.1.1.30 log-adjacency-changes network 1.1.1.30 0.0.0.0 area 1 network 1.1.1.0 0.0.0.255 area 1 network 10.10.31.0 0.0.0.255 area 1 network 11.10.31.0 0.0.0.255 area 1 network 192.168.11.0 0.0.0.3 area 1 ! ip route 1.1.1.32 255.255.255.255 Service-Engine0/0 ! ! no ip http server no ip http secure-server ! ! ! ! ! control-plane ! ! ! voice-port 0/1/0:23 ! ! ! ! ! dial-peer voice 1 voip preference 1 voice-class h323 1 session target ipv4:192.200.1.21 ! dial-peer voice 2 voip preference 2 destination-pattern 2... voice-class h323 1 session protocol sipv2 session target ipv4:1.1.1.32 dtmf-relay sip-notify codec g711ulaw no vad ! dial-peer voice 999 pots destination-pattern 9.. port 0/1/0:23 forward-digits all ! ! ! ! telephony-service max-ephones 5 max-dn 25 ip source-address 10.10.31.254 port 2000 auto assign 1 to 5 create cnf-files version-stamp Jan 01 2002 00:00:00 voicemail 2000 max-conferences 8 gain -6 web admin system name ims password 1234 transfer-system full-consult ! ! ephone-dn 1 dual-line number 1300 call-forward busy 2000 call-forward noan 2000 timeout 10 ! ! ephone-dn 2 dual-line number 1301 ! ! ephone-dn 3 dual-line number 1302 ! ! ephone-dn 4 dual-line number 1303 ! ! ephone-dn 5 dual-line number 1304 call-forward busy 2000 call-forward noan 2000 timeout 10 ! ! ephone-dn 6 number 8000.... mwi on ! ! ephone-dn 7 number 8001.... mwi off ! ! ephone 1 mac-address 001B.0CAC.D83D type 7970 button 1:1 ! ! ! ephone 2 mac-address 001B.2A8A.2C5E type 7970 button 1:2 ! ! ! ephone 3 ! ! ! ephone 4 ! ! ! ephone 5 ! ! ! line con 0 session-timeout 360 exec-timeout 0 0 line aux 0 line 194 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh line vty 0 4 password 1234 login ! scheduler allocate 20000 1000 ntp server 192.200.1.11 ! end br2#
hq>en hq#show run Building configuration... Current configuration : 1902 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname hq ! boot-start-marker boot-end-marker ! ! card type command needed for slot/vwic-slot 0/1 ! no aaa new-model ! ! ip cef ! ! ! multilink bundle-name authenticated ! ! voice-card 0 no dspfarm ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! archive log config hidekeys ! ! ! ! ! ! interface FastEthernet0/0 no ip address duplex auto speed auto ! interface FastEthernet0/0.100 encapsulation dot1Q 100 ip address 192.200.1.254 255.255.255.0 ! interface FastEthernet0/0.200 encapsulation dot1Q 200 ip address 10.10.11.254 255.255.255.0 ! interface Service-Engine0/0 no ip address shutdown ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0 no ip address encapsulation frame-relay frame-relay lmi-type ansi ! interface Serial0/0/0.1 point-to-point ip address 192.168.10.1 255.255.255.252 frame-relay interface-dlci 601 ! interface Serial0/0/0.2 point-to-point ip address 192.168.11.1 255.255.255.252 frame-relay interface-dlci 602 ! interface Serial0/0/1 no ip address shutdown clock rate 2000000 ! router ospf 1 router-id 1.1.1.1 log-adjacency-changes network 1.1.1.1 0.0.0.0 area 1 network 10.10.11.0 0.0.0.255 area 1 network 192.168.10.0 0.0.0.3 area 1 network 192.168.11.0 0.0.0.3 area 1 network 192.200.1.0 0.0.0.255 area 1 ! ! ! no ip http server no ip http secure-server ! ! ! ! ! ! ! control-plane ! ! ! voice-port 0/2/0 ! voice-port 0/2/1 ! voice-port 0/3/0 ! voice-port 0/3/1 ! ! ! ! ! ! ! ! line con 0 session-timeout 360 line aux 0 line 194 no activation-character no exec transport preferred none transport input all transport output lat pad telnet rlogin lapb-ta mop udptn v120 ssh line vty 0 4 password 1234 login ! scheduler allocate 20000 1000 ! webvpn cef ! end hq#
