Hi, I have noticed when I run AutoQoS on sub-interface it automatically add encapsulation CISCO on Inteface-dlci
Config Prior to AutoQoS: interface Serial0/1/0 no ip address encapsulation frame-relay IETF no frame-relay inverse-arp frame-relay lmi-type ansi ! interface Serial0/1/0.1 point-to-point ip address 10.10.112.2 255.255.255.0 ip ospf mtu-ignore snmp trap link-status frame-relay interface-dlci 102 ------------------------------------------- Configuration After AutoQoS interface Serial0/1/0.1 point-to-point ip address 10.10.112.2 255.255.255.0 ip ospf mtu-ignore snmp trap link-status frame-relay interface-dlci 102 CISCO <<<<<<- Encapsulation Cisco class AutoQoS-FR-Se0/1/0-1 auto qos voip trust Prior to auto configuration on my primary interface frame-relay encapsulation is IETF. I think encapsulation should be match after autoqos. Thanks & Regards, Ramcharan Arya
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com