Hello,
I have a Cisco 7600 RSP 720 with several VRFs defined (only local VRFs, no MPLS). The router has the following config: ip flow-cache entries 10000 ip flow-cache timeout active 1 mls ip multicast flow-stat-timer 9 mls flow ip interface-full mls nde sender version 5 ip flow-export version 5 origin-as ip flow-export destination IP1 9991 vrf vrf_test I've activated: ip flow ingress on 2 interfaces (and ip route-cache flow) The problem is that the flows that I receive only contain local traffic (traffic between various IP addresses on the C7600 and remote IPs, no transit traffic). sh ip cache flow shows a lot of entries and transit traffic. What am I doing wrong or what should I correct ? Can anyone help me ? _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/