On May 22, 2008, at 6:06 PM, Jason Berenson wrote: > 7206 NPE-G1 > PA-A3-OC3MM > c7200-is-mz.124-19.bin
Been down this path several times, so hopefully this helps. Have you tried using a hierarchal QoS policy? Also you may want to set your tx-ring-limit to the minimum, ie: 3 or you might have some jitter issues. That being said, you need to use a nested QoS policy, something like: class-map match-any voip-sig match ip dscp af31 cs5 class-map match-any voip-rtp match ip dscp cs3 ef ! policy-map max-voice class voip-rtp priority percent 70 class voip-sig bandwidth percent 5 class class-default fair-queue policy-map atm-3m-voip class class-default shape average 3000000 service-policy max-voice Then you can apply your policy map to the sub interface.... HTH. -- Robert Blayzor, BOFH INOC, LLC [EMAIL PROTECTED] http://www.inoc.net/~rblayzor/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/