Hi, Considering following simple topology:
Laptop-----(e1)R1-----R2----R3----Server ...and that OSPF timers are the same and BFD is not used (no failure recovery optimization used) on all scenarios: What would be the recovery time when interface etherne 1 (from laptop to R1) fails in these cases: -Just IP routing between R1 and R3 -VPLS between R1 and R3 -MPLS VPN between R1 and R3 If I am not wrong, in VPLS case R1 will remove MAC address and communicate that to R3, but not sure if it will impact final connectivity recovery time between laptop--server. (sorry, no lab to test right now) Tks. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/