On 4/7/09, Bill Wichers <bi...@waveform.net> wrote: > [snip] >> > ... and the context of *this* discussion is likely involving PA-FE-TX's, >> > which are "quite old hardware", and cannot do any sort of autoneg. >> > >> True, so the ports should probably be nailed to full at both sides. > > Correct, they are PA-FE-TX's. There are two such PAs in a VIP2-50, and > those are running the port channel. <.. snip ..> > > I typically set both ends (router and switch) of these links to 100/full > since I've seen weird autonegotiation problems before. This works just > fine for individual FE links, but as soon as I bring up the Etherchannel > group both member links on the router end drop back to "unknown duplex"
Can you configure the etherchannel group interface as 100/full? Lee _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/