Check the other end and make sure it is also up. I've seen cases where the
PE router on one side shows the circuit as "up", but the other PE router
will show it as "down".
--
Jerry B.
----- Original Message -----
the vc still is up,but the eompls does't work suddenly.
i got the show message on the cli
Local interface: VFI SDH-NEC VFI up
[snip]
sh mpls l2transport vc
VFI SDH-NEC VFI 192.168.4.16 807 UP
seems it does not have any issue here, except tunnel lable can not be
found .what should i do for the further troubleshooting?
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/