Thanks for the info Phil! -Vinny
-----Original Message----- From: cisco-nsp-boun...@puck.nether.net [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Phil Mayers Sent: Thursday, February 28, 2013 1:17 PM To: cisco-nsp@puck.nether.net Subject: Re: [c-nsp] HSRP/VRRP/GLBP Dual Stack on Cat6500/Sup720 3BXL? On 28/02/13 18:10, vinny_abe...@dell.com wrote: > Hello, > > Is there dual stack support in any redundancy protocol > (HSRP/VRRP/GLBP) on the Catalyst 6500 with a Sup720 3BXL? If so, > which protocols are supported and beginning in what IOS releases? Yes. HSRPv2 is supported in SXI releases (possibly earlier; read the release notes) You need to toggle the standby version globally (which changes the HSRP vMAC). int VlanX standby version 2 standby 1 ip x.x.x.x standby 2 ipv6 autoconfig Works fine. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/