Beware of one thing 6PE can not do. BGPv6 over multi-hop will not work as there is no recursive lookup from v6 too v4 in your BGP speaker. This is a feature, not a bug... so it will not be fixed.
Otherwise 6PE is a breeze. On 14 April 2013 21:56, Ahmed Hilmy <hilmy...@gmail.com> wrote: > Hello Expert, > > We are planning to deploy IPv6 at our IPv4 Backbone, our PE to as Dual > Stack and carry IPv6 packet through MPLS label. > There are different scenarios, one of them is 6PE. > Would you please guide me from where can i start ? > > Thanks, > > Ahmed > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- *Med Vänliga Hälsningar - Best Regards* *Mattias Gyllenvarg* *Nätutveckling* Bredband2 Tel: +46 406219712 _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/