Hi list, Is that possible to write an Embedded Event Management System to achive the following in following scenario of BGP environment? There are very many BGP peerings in the network, and many events. The reason may be that customers turn off the power at the CPE, etc. We believe that it would be too extensive to examine all these events. Is it possible to achieve the following: The script performs the show command as shown below. If there is anything on the active or idle sent an email to "support office".
Router# sh ip bgp summary | include Active|Idle 81.175.31.78 4 65500 3215550 3079173 0 0 0 1w1d Active 81.175.31.174 4 65500 0 0 0 0 0 never Active 213.160.232.170 4 64519 0 0 0 0 0 never Idle Is this possible to achieve? Amir _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/