Hi Oliver Not by default, You'd have to enable l2protocol forward/peer under the service instance
adam -----Original Message----- From: cisco-nsp [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Olivier CALVANO Sent: Wednesday, March 05, 2014 11:41 AM To: cisco-nsp@puck.nether.net Subject: [c-nsp] (no subject) Hi A small question please, on Cisco ME3400/3800 With this config: interface GigabitEthernet0/15 switchport trunk allowed vlan none switchport mode trunk speed 100 duplex full no cdp enable service instance 11 ethernet encapsulation dot1q 1-4094 bridge-domain 909 ! The cisco encapsule the Spaning tree and other L2 Protocole into the vlan 909 ? thanks Olivier _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/