Why doesn't CRS-1 share power load?
RP/0/RP0/CPU0:cm-1(admin)#sho env pow
Power Supply Voltage Current
DC-PEM DC-PEM (V) (A)
Zone 1: [A], [B] 53.005, 54.083 3.238, 10.968
Zone 2: [A], [B] 52.614, 53.887 3.133, 10.655
Zone 3: [A], [B] 53.397, 53.789 2.924, 10.341
Total Current: 41.259 A
Total Power : 2216.183 W
RP/0/RP0/CPU0:cm-1(admin)#
>From the output, why does source A used 3 A while source B used 10 A?
Thank you very much.
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
