> Its most certainly not. If you neither know the exact configuration of the box, nor if the box is layer 2 or layer 3 switching, then you better not partition the tcam for a specific purpose.
> Check logging, check your routing table. If you have a routing-table (aka "ip routing" in the config), then you cannot use the layer 2 template. I'm not use the routing. It is l2 switch. Why does it have the high percent of interrupt process? 3400#sho ip rou Default gateway is 10.1.7.1 Host Gateway Last Use Total Uses Interface ICMP redirect cache is empty 3400# Thank you very much. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
