Dear Edward, Thanks for your e-mail. This SIP has other SPA running fine.
I inserted again the SPA to the SIP and I received the following log: Apr 22 14:18:13: %IOSXE_OIR-6-INSSPA: SPA inserted in subslot 1/2 Apr 22 14:18:21: %LINK-3-UPDOWN: SIP1/2: Interface EOBC1/1, changed state to up Apr 22 14:18:24: %IOSXE_SPA-6-UPDOWN: Interface TenGigabitEthernet1/2/0, link down due to local fault Apr 22 14:18:24: %SPA_OIR-6-ONLINECARD: SPA (SPA-1X10GE-L-V2) online in subslot 1/2 Apr 22 14:18:26: %CMCC-3-PLIM_STATUS: SIP1: cmcc: A PLIM driver informational error TXSPI2 Frame Error, block 19 count 1 Apr 22 14:20:52: %IOSXE_SPA-6-UPDOWN: Interface TenGigabitEthernet1/2/0, link down due to local fault Apr 22 14:20:54: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/2/0, changed state to down Apr 22 14:20:55: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/2/0, changed state to down Apr 22 14:20:54: %LINK-3-UPDOWN: SIP1/2: Interface TenGigabitEthernet1/2/0, changed state to down Do you know what is the meaning of the PLM driver message? Are there commands that I could executed to check that the SPA is working fine? I inserted an SPF and made a loop and the port went UP: Apr 22 14:25:27: %TRANSCEIVER-6-INSERTED: SIP1/2: transceiver module inserted in TenGigabitEthernet1/2/0 Apr 22 14:25:30: %IOSXE_SPA-6-UPDOWN: Interface TenGigabitEthernet1/2/0, link down due to local fault Apr 22 14:25:40: %TRANSCEIVER-6-REMOVED: SIP1/2: Transceiver module removed from TenGigabitEthernet1/2/0 Apr 22 14:26:10: %TRANSCEIVER-6-INSERTED: SIP1/2: transceiver module inserted in TenGigabitEthernet1/2/0 Apr 22 14:26:13: %IOSXE_SPA-6-UPDOWN: Interface TenGigabitEthernet1/2/0, link down due to local fault Apr 22 14:29:41: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/2/0, changed state to up Apr 22 14:29:42: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/2/0, changed state to up Apr 22 14:29:41: %LINK-3-UPDOWN: SIP1/2: Interface TenGigabitEthernet1/2/0, changed state to up ASR1006-LIS01-02#sh platform Chassis type: ASR1006 Slot Type State Insert time (ago) --------- ------------------- --------------------- ----------------- 0 ASR1000-SIP10 ok 13w5d 0/0 SPA-5X1GE-V2 ok 13w5d 0/1 SPA-4XOC3-POS ok 13w5d 0/2 SPA-1XOC12-POS ok 13w5d 0/3 SPA-4XOC3-POS ok 13w5d 1 ASR1000-SIP10 ok 13w5d 1/0 SPA-5X1GE-V2 ok 13w5d 1/1 SPA-4XOC3-POS ok 13w5d 1/2 SPA-1X10GE-L-V2 ok 00:34:16 1/3 SPA-4XOC12-POS ok 13w5d R0 ASR1000-RP2 ok, active 13w5d R1 ASR1000-RP2 ok, standby 13w5d F0 ASR1000-ESP20 ok, active 13w5d F1 ASR1000-ESP20 ok, standby 13w5d P0 ASR1006-PWR-AC ok 13w5d P1 ASR1006-PWR-AC ok 13w5d Slot CPLD Version Firmware Version --------- ------------------- --------------------------------------- 0 09111601 12.2(33r)XNC 1 09111601 12.2(33r)XNC R0 10021901 12.2(33r)XND R1 10021901 12.2(33r)XND F0 08041102 12.2(33r)XNC F1 08041102 12.2(33r)XNC ASR1006-LIS01-02#sh int te1/2/0 TenGigabitEthernet1/2/0 is up, line protocol is up Hardware is SPA-1X10GE-L-V2, address is a493.4c76.4260 (bia a493.4c76.4260) MTU 1500 bytes, BW 10000000 Kbit/sec, DLY 10 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive not supported Full Duplex, 10000Mbps, link type is force-up, media type is 10GBase-LR output flow-control is on, input flow-control is on ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:01:58, output 00:01:58, output hang never Last clearing of "show interface" counters never Input queue: 0/375/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 30 second input rate 0 bits/sec, 0 packets/sec 30 second output rate 0 bits/sec, 0 packets/sec 1 packets input, 60 bytes, 0 no buffer Received 1 broadcasts (0 IP multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 1 packets output, 60 bytes, 0 underruns 0 output errors, 0 collisions, 5 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 pause output 0 output buffer failures, 0 output buffers swapped out ASR1006-LIS01-02#sh hw-module subslot 1/2 transceiver 0 idprom detai IDPROM for transceiver TenGigabitEthernet1/2/0: Description = XFP optics (type 6) Transceiver Type: = OC192 + 10GBASE-L (97) Product Identifier (PID) = XFP-10GLR-OC192SR Vendor Revision = B2 Serial Number (SN) = AGA1125N1X9 Vendor Name = CISCO-AVAGO Vendor OUI (IEEE company ID) = 00.17.6A (5994) CLEI code = WMOTBEVAAB Cisco part number = 10-1989-02 Device State = Enabled. Date code (yy/mm/dd) = 07/07/22 Connector type = LC. Encoding = 64B/66B SONET Scrambled NRZ Minimum bit rate = 9900 Mbits/s Maximum bit rate = 10500 Mbits/s Power dissipation class = Pwr Level 2 (2.5 W max pwr dissipation). cdr function = supported. Tx Reference clock = not Required. Max link length for SMF fiber = 10 km Max link length for EBW 50/125um fiber = not supported Max link length for 0/125um fiber = not supported Max link length for 62.5/125um fiber = not supported Max link length for copper = not supported Tx device technology = 1550 nm DFB Wavelength control technology = no wavelength control Transceiver cooling technology = un-cooled transmitter device Detector type = PIN detector Transmitter tuning = transmitter not tunable Supported CDR rates = 9.95 Gb/s 10.3 Gb/s 10.5 Gb/s XFI Loopback Mode Nominal laser wavelength = 1310 nm Wavelength tolerance w.r.t. nominal = (+/-) 20 nm Maximum case temperature = 70 degrees C. Maximum power dissipation = 2500 mW Power dissipation in power-down mode = 1500 mW Maximum current required for +5V supply = 0 mA Maximum current required for +3.3V supply = 800 mA Maximum current required for +1.8V supply = 0 mA Maximum current required for -5.2V supply = 0 mA Diagnostic capabilities = FEC BER not supported. average Rx power measured. Enhanced functions = Soft TX disable supported Soft Power-down supported Aux A/D input 1 = Laser Temperature Aux A/D input 2 = Transceiver temperature operating range = -5 C to 75 C (commercial) High temperature alarm threshold = +78.000 C High temperature warning threshold = +73.000 C Low temperature warning threshold = +5.000 C Low temperature alarm threshold = +0.000 C High laser bias current alarm threshold = 100.000 mAmps High laser bias current warning threshold = 85.000 mAmps Low laser bias current warning threshold = 15.000 mAmps Low laser bias current alarm threshold = 5.000 mAmps High transmit power alarm threshold = 3.5 dBm High transmit power warning threshold = 1.5 dBm Low transmit power warning threshold = -9.2 dBm Low transmit power alarm threshold = -11.2 dBm High receive power alarm threshold = 3.5 dBm High receive power warning threshold = 1.5 dBm Low receive power warning threshold = -15.4 dBm Low receive power alarm threshold = -17.4 dBm Thanks. > Subject: Re: [c-nsp] SPA issue on ASR1006 > From: e...@edgeoc.net > Date: Wed, 22 Apr 2015 08:16:55 -0400 > CC: cisco-nsp@puck.nether.net > To: jordimagr...@hotmail.com > > Bad SPA or bad SIP. Try moving the SPA to a different slot in the SIP. If it > comes up that could point to the original slot as faulty. If it doesn't help > it could be a bad SPA. > > - Ed > > > > On Apr 22, 2015, at 07:27, Jordi Magrané Roig <jordimagr...@hotmail.com> > wrote: > > Dear colleagues, > > I have an ASR1006 with ESP20, RP2 and two SIP10. Recently I have inserted one > SPA 1x10G into one of the SIP10 and I have seen the following log messages: > > > > Apr 22 12:00:53: %IOSXE_OIR-6-INSSPA: SPA inserted in > subslot 1/2 > > Apr 22 12:01:00: %LINK-3-UPDOWN: SIP1/2: Interface > EOBC1/1, changed state to up > > ASR1006-LIS01-02#sh ip int > > Apr 22 12:01:03: %IOSXE_SPA-6-UPDOWN: Interface > TenGigabitEthernet1/2/0, link down due to local fault > > Apr 22 12:01:03: %SPA_OIR-6-ONLINECARD: SPA > (SPA-1X10GE-L-V2) online in subslot 1/2 > > Apr 22 12:01:11: %IOSXE_SIP_SPA-4-SPABUS: SIP1/2: > Subslot 2, Read SPA BUS access failed. timeout=0 err=1 par=0 err_c=0x10883 > addr=0x00045008 data =0x0 > > ASR1006-LIS01-02# > > Apr 22 12:01:12: %IOSXE_SIP_SPA-3-DEVICE_ERROR: > SIP1/2: subSlot 2, spatype 0x50C. Device error: critical fault occured > > ASR1006-LIS01-02# > > Apr 22 12:01:15: %CMCC-3-PLIM_STATUS: SIP1: > cmcc: A PLIM driver informational error RXSPI2 Out of Frame, block 15 > count 3 > > ASR1006-LIS01-02# > > Apr 22 12:01:17: %SPA_OIR-3-RECOVERY_RELOAD: subslot > 1/2: Attempting recovery by reloading SPA > > ASR1006-LIS01-02# > > ASR1006-LIS01-02# > > Apr 22 12:01:17: %SPA_OIR-6-OFFLINECARD: SPA > (SPA-1X10GE-L-V2) offline in subslot 1/2 > > ASR1006-LIS01-02# > > ASR1006-LIS01-02# > > ASR1006-LIS01-02# > > ASR1006-LIS01-02# > > Apr 22 12:01:26: %IOSXE_SIP_SPA-3-SPI4_NOTSYNC: > SIP1/2: SPA-1X10GE-L-V2[1/2]: Can not synchronize SPI4 bus (host: src in sync, > sink not in sync, spa: src in sync, sink not in sync). > > ASR1006-LIS01-02# > > Apr 22 12:01:31: %SPA_OIR-3-RECOVERY_RELOAD: subslot > 1/2: Attempting recovery by reloading SPA > > ASR1006-LIS01-02# > > Apr 22 12:01:31: %SPA_OIR-6-OFFLINECARD: SPA > (SPA-1X10GE-L-V2) offline in subslot 1/2 > > ASR1006-LIS01-02# > > Apr 22 12:01:39: %IOSXE_SIP_SPA-3-SPI4_NOTSYNC: > SIP1/2: SPA-1X10GE-L-V2[1/2]: Can not synchronize SPI4 bus (host: src in sync, > sink not in sync, spa: src in sync, sink not in sync). > > ASR1006-LIS01-02# > > Apr 22 12:01:44: %SPA_OIR-3-RECOVERY_RELOAD: subslot > 1/2: Attempting recovery by reloading SPA > > ASR1006-LIS01-02# > > Apr 22 12:01:44: %SPA_OIR-6-OFFLINECARD: SPA > (SPA-1X10GE-L-V2) offline in subslot 1/2 > > ASR1006-LIS01-02# > > Apr 22 12:01:52: %IOSXE_SIP_SPA-3-SPI4_NOTSYNC: > SIP1/2: SPA-1X10GE-L-V2[1/2]: Can not synchronize SPI4 bus (host: src in sync, > sink not in sync, spa: src in sync, sink not in sync). > > ASR1006-LIS01-02# > > Apr 22 12:01:57: %SPA_OIR-3-RECOVERY_RELOAD: subslot > 1/2: Attempting recovery by reloading SPA > > ASR1006-LIS01-02# > > Apr 22 12:01:57: %SPA_OIR-6-OFFLINECARD: SPA > (SPA-1X10GE-L-V2) offline in subslot 1/2 > > ASR1006-LIS01-02# > > ASR1006-LIS01-02# > > Apr 22 12:02:05: %IOSXE_SIP_SPA-3-SPI4_NOTSYNC: > SIP1/2: SPA-1X10GE-L-V2[1/2]: Can not synchronize SPI4 bus (host: src in sync, > sink not in sync, spa: src in sync, sink not in sync). > > ASR1006-LIS01-02# > > Apr 22 12:02:10: %SPA_OIR-3-RECOVERY_RELOAD: subslot > 1/2: Attempting recovery by reloading SPA > > ASR1006-LIS01-02# > > Apr 22 12:02:10: %SPA_OIR-6-OFFLINECARD: SPA > (SPA-1X10GE-L-V2) offline in subslot 1/2 > > ASR1006-LIS01-02# > > Apr 22 12:02:18: %SPA_OIR-3-SPA_POWERED_OFF: subslot > 1/2: SPA 1x10GE XFP SPA powered off after 5 failures within 1200 seconds > > ASR1006-LIS01-02# > > Apr 22 12:02:18: %SPA_OIR-6-OFFLINECARD: SPA > (SPA-1X10GE-L-V2) offline in subslot 1/2 > > ASR1006-LIS01-02# > > Apr 22 12:02:18: %IOSXE_SIP_SPA-3-SPI4_NOTSYNC: > SIP1/2: SPA-1X10GE-L-V2[1/2]: Can not synchronize SPI4 bus (host: src in sync, > sink not in sync, spa: src in sync, sink not in sync). > > ASR1006-LIS01-02# > > ASR1006-LIS01-02# > > ASR1006-LIS01-02# > > ASR1006-LIS01-02# > > ASR1006-LIS01-02# > > ASR1006-LIS01-02# > > Apr 22 12:02:47: %IOSXE_OIR-6-REMSPA: SPA removed from > subslot 1/2, interfaces disabled > > > > Any ideas about this issue? > > > > ASR1006-LIS01-02#sh platform > > Chassis type: > ASR1006 > > > > > Slot > Type > State > Insert time (ago) > > --------- ------------------- --------------------- > ----------------- > > 0 > ASR1000-SIP10 > ok > 13w5d > > 0/0 > SPA-5X1GE-V2 > ok > 13w5d > > 0/1 > SPA-4XOC3-POS > ok > 13w5d > > 0/2 > SPA-1XOC12-POS > ok > 13w5d > > 0/3 > SPA-4XOC3-POS > ok > 13w5d > > 1 > ASR1000-SIP10 > ok > 13w5d > > 1/0 > SPA-5X1GE-V2 > ok > 13w5d > > 1/1 > SPA-4XOC3-POS > ok > 13w5d > > 1/2 > SPA-1X10GE-L-V2 > booting > 00:00:01 > > 1/3 > SPA-4XOC12-POS > ok > 13w5d > > R0 > ASR1000-RP2 ok, active > 13w5d > > R1 > ASR1000-RP2 ok, > standby > 13w5d > > F0 > ASR1000-ESP20 ok, > active > 13w5d > > F1 > ASR1000-ESP20 ok, > standby > 13w5d > > P0 > ASR1006-PWR-AC ok > 13w5d > > P1 > ASR1006-PWR-AC > ok > 13w5d > > > > Slot CPLD > Version Firmware > Version > > > --------- ------------------- > --------------------------------------- > > 0 09111601 > 12.2(33r)XNC > > > 1 > 09111601 > 12.2(33r)XNC > > > R0 > 10021901 > 12.2(33r)XND > > > R1 > 10021901 > 12.2(33r)XND > > > F0 > 08041102 > 12.2(33r)XNC > > > F1 > 08041102 > 12.2(33r)XNC > > > > > ASR1006-LIS01-02# > > > ASR1006-LIS01-02#sh ver > Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-ADVIPSERVICESK9-M), > Version 15.2(4)S6, RELEASE SOFTWARE (fc4) > Technical Support: http://www.cisco.com/techsupport > Copyright (c) 1986-2014 by Cisco Systems, Inc. > Compiled Thu 14-Aug-14 19:30 by mcpre > > IOS XE Version: 03.07.06.S > > Cisco IOS-XE software, Copyright (c) 2005-2014 by cisco Systems, Inc. > All rights reserved. Certain components of Cisco IOS-XE software are > licensed under the GNU General Public License ("GPL") Version 2.0. The > software code licensed under GPL Version 2.0 is free software that comes > with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such > GPL code under the terms of GPL Version 2.0. For more details, see the > documentation or "License Notice" file accompanying the IOS-XE software, > or the applicable URL provided on the flyer accompanying the IOS-XE > software. > > > ROM: IOS-XE ROMMON > > ASR1006-LIS01-02 uptime is 13 weeks, 5 days, 11 hours, 5 minutes > Uptime for this control processor is 13 weeks, 5 days, 11 hours, 6 minutes > System returned to ROM by reload at 00:18:14 CET Fri Jan 16 2015 > System restarted at 00:21:28 CET Fri Jan 16 2015 > System image file is > "bootflash:asr1000rp2-advipservicesk9.03.07.06.S.152-4.S6.bin" > Last reload reason: Reload Command > > > > This product contains cryptographic features and is subject to United > States and local country laws governing import, export, transfer and > use. Delivery of Cisco cryptographic products does not imply > third-party authority to import, export, distribute or use encryption. > Importers, exporters, distributors and users are responsible for > compliance with U.S. and local country laws. By using this product you > agree to comply with applicable laws and regulations. If you are unable > to comply with U.S. and local laws, return this product immediately. > > A summary of U.S. laws governing Cisco cryptographic products may be found at: > http://www.cisco.com/wwl/export/crypto/tool/stqrg.html > > If you require further assistance please contact us by sending email to > exp...@cisco.com. > > cisco ASR1006 (RP2) processor with 4238183K/6147K bytes of memory. > Processor board ID FOX1608H96D > 10 Gigabit Ethernet interfaces > 17 Packet over SONET interfaces > 32768K bytes of non-volatile configuration memory. > 8388608K bytes of physical memory. > 1826815K bytes of eUSB flash at bootflash:. > 78085207K bytes of SATA hard disk at harddisk:. > > Configuration register is 0x2102 > > > Thanks in advance for your support. > > Best regards, > Jordi > > > > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/