I've searched for this before and I was not able to find the functionality, even on the 5ks. The reason being in my belief is the Nexus platform is designed for datacenter switching. QinQ is more of a metro/carrier type functionality. With the QinQ SVI your egress interface would need to be set for dotq-tunnel to strip the outer VLAN unless your carried expects both tags. Of course opening a ticket with TAC is the best way to confirm though. On Jun 9, 2016 6:27 AM, "Phil Mayers" <p.may...@imperial.ac.uk> wrote:
> On 09/06/16 09:50, James Bensley wrote: > > You say it's not in 6.2 on your M1 cards, the firmware can be upgraded >> on the live box if required, however do you know if it is actually >> supported on these line cards in a later version? I'd like to know if >> QinQ is even possible on this hardware, if not we'll have to loop >> through another device to pop the tags (yukky!). >> > > I don't know, but I suspect not. I see no sign of it on sup2t/6880 (which > are also EARL8 based like the M1 cards) and that would be a far more likely > platform to see it IMO. > > If you want to be sure you'll have to ask TAC, unless someone else on the > list knows for sure. > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/