I have Nexus 3064 with vPC configuration and some strange issue going on, I have configured LACP 802.3ad bonding with my Linux server everything was good and working great but as soon as i reboot server i found on Nexus switch vpc is down
N3K(config-if)# sh vpc 137 vPC status ---------------------------------------------------------------------- id Port Status Consistency Reason Active vlans -- ---- ------ ----------- ------ ------------ 137 Po137 down* success success - But as soon as i do "shut/no shut" on po137 interface it works and vpc brought up. is this normal behavior on Cisco Nexus switches? I am using many IOS switch in same config and it works but with vpc i am having issue. This is my switch config, i am running nexus 7.0.x NX-OS interface port-channel137 switchport mode trunk switchport trunk native vlan 40 switchport trunk allowed vlan 10,20,30,100 speed 10000 vpc 137 on Linux side i have following config. BONDING_OPTS="mode=4 miimon=500 downdelay=1000 lacp_rate=1" _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/