Edd, I could have adequately provided you and your wife with a fine meal
the last two haulouts....you pay the shipping charges.
Bob Abbott
AZURA
C&C 32 - 84
Halifax, N.S.
On 2013/01/07 3:33 PM, Edd Schillay wrote:
My wife and I found the best solution for a mussel problem is some fra
diavlo sauce and some white wine.
All the best,
Edd
Edd M. Schillay
Starship Enterprise
C&C 37+ | Sail No: NCC-1701-B
City Island, NY
Starship Enterprise's Captain's Log Website
<http://ncc1701a.blogspot.com/>
On Jan 7, 2013, at 2:29 PM, Bill Connon <billcon...@globetrotter.net
<mailto:billcon...@globetrotter.net>> wrote:
Robert Abbott wrote:
The topic is back.....last year, in an attempt to inhibit the growth
of mussels on the prop and prop shaft, I coated them with
lanolin.....was told or read this would help. When the boat was
hauled in October, the prop/shaft were completely encased in
mussels, again. The growth has a noticeable, negative effect on the
performance of the prop later in the season e.g. higher RPM's to
attain same cruising speed when motoring. After trying a few so
called 'remedies', I am now convinced the only effective way to keep
the prop free of marine growth (mussels on mine) is to dive a few
times a season and physically remove them. Maybe I need a few
pounds of lead, my safety harness on and tethered to the toerail and
a few feet of hose the top end tied to the pushpit and me breathing
from the bottom end.
However, before I comtemplated something like that, there is one
more 'remedy' I have heard/read about......it involves coating the
prop/shaft with "galvanized zinc spray paint". I have never seen
this done and do not know what effect it might have on the bronze
prop (shouldn't be negative but I'm not sure). There is never any
marine growth on my sacrificial zinc(s).
Has anyone heard of this? Anyone with any experience with this
paint on props?
Bob Abbott
AZURA
C&C 32 - 84
Halifax, N.S.
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
Bob,
The breathing tube won't do it. I tried that as a kid and you won't
get any air. You'll need an air supply - bottle or compressor and a
mouthpiece to control the pressure.
Bill
Caprice 1
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com