Now I'm istalling debain on my freerunner. This is what i did on ubuntu: sudo iptables -N RH-Firewall-1-INPUT sudo iptables -I RH-Firewall-1-INPUT -s 192.168.0.202 -j ACCEPT sudo iptables -t nat -A POSTROUTING -j MASQUERADE -s 192.168.0.0/24 sudo iptables -t nat -A PREROUTING -p tcp -s 192.168.0.202 -d 192.168.0.200 --sport 0:65535 --dport 0:65535 -j DNAT --to-destination 192.168.1.1 sudo iptables -t nat -A PREROUTING -p udp -s 192.168.0.202 -d 192.168.0.200 --sport 0:65535 --dport 0:65535 -j DNAT --to-destination 192.168.1.1 sudo sysctl -w net.ipv4.ip_forward=1 sudo iptables-save and I installed and run Firestarter (not sure if it was necessary)
> i did first: iptables -N new_chain > this worked,but only one time i could ping another pc in my network and opkg > recived 404 Error (is trying to connect buildhost.openmoko.org , [I changed > to correct directory but there arent packages.sig files]). > Ping to WAN is somewehre disabled, i couldn't find where yet. So I removed > the line in install.sh (Debian installer) > with the ping signal. But I lost connection to internet. Now the problems is > my laptop has no access to internet. I will fix this an try again. > > Wifi problem: wifi finds a network (only one unsecured, but not unsecured > form laptop) but can't connect. Same from the command line. > udhcpc output: Sending discover... (3x) > run-parts: /etc/udhcpc.d/99avahi-autoipd exited with return code 1 > this repeats endless > > > install Debian without internet access >> >> Matthias Camenzind wrote: >>> I tried but allways the same error on first line: iptables: No >>> chain/target/match by that name >> >> You might need extra kernel modules. Could you give the exact error message? >> >> What I use is this: >> >> iface usb0 inet static >> address 192.168.0.200 >> netmask 255.255.255.0 >> post-up iptables -A POSTROUTING -t nat -j MASQUERADE -s >> 192.168.0.0/24 >> post-up echo 1> /proc/sys/net/ipv4/ip_forward >> post-up iptables -P FORWARD ACCEPT >> >> + in /etc/udev/rules.d/z60_openmoko.rules >> KERNEL=="usb0", SUBSYSTEM=="net", ACTION=="add", RUN+="/sbin/ifup usb0" >> KERNEL=="usb0", SUBSYSTEM=="net", ACTION=="remove", >> RUN+="/sbin/ifdown usb0" >> >> Of course you also need something like this on your freerunner: >> >> iface usb0 inet static >> address 192.168.0.202 >> netmask 255.255.255.0 >> network 192.168.0.0 >> gateway 192.168.0.200 >> >> As for your wifi problem, could you give more details? Can you connect >> your laptop? What exactly are you trying, and what errors do you get? >> >> -- >> Charles-Henri >> >> >> _______________________________________________ >> Openmoko community mailing list >> community@lists.openmoko.org >> http://lists.openmoko.org/mailman/listinfo/community > > ________________________________ > Connect to the next generation of MSN Messenger Get it now! _________________________________________________________________ Connect to the next generation of MSN Messenger http://imagine-msn.com/messenger/launch80/default.aspx?locale=en-us&source=wlmailtagline _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community