The green wire is the ground wire from the CRT board shield that should connect to the ground braid on the CRT.
The other wire you describe is part of the deguass circutry. It connects to the black coil of wire that runs around the edges of the CRT. You should see the connectors on the bottom of the CRT empty and waiting. Good luck! Stop by Applefritter forums at http://www.applefritter.com/cgi-bin/YaBB/YaBB.pl and visit the Colour Classic foum. I'm almost done (within a month or so) of reverse engineering the analog board, and we've got great resources for this Mac. -msr -----Original Message----- To my surprise, laying across the analog board was a spring attached two two looped lengths of wire that look like picture hanging wire, not connected to anything. In addition, there is a green wire with a clip coming from metal box the end of the yoke (I think that's the right term) not connected to anything. -- Compact Macs is sponsored by <http://lowendmac.com/>. Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> The FAQ: <http://macfaq.org/> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
