On Tue, Jan 31, 2012 at 10:36:54PM +0100, Rudolf Marek wrote: > >> The board booted fine, except I have no video, serial port or ability to >> write >> to the BIOS chip. > > No video -> you need to include the extracted VGA bios from original > BIOS. No serial port looks like wrong superio setup. No ability to write > to the chip sounds interesting ? What do you mean by that. Flashrom > cannot no-long overwrite the chip content? Maybe just some GPIO needs to > be raised. Do you have more PLCC chips or other boards so you can hotswap > them?
I do not think that there is anything board specific in the VGA code that i once wrote for this display hardware. Did my code break in the last two years? > For the VGA you need to use bios_extract and extract the VGA bios from > orig bios image and tell coreboot via menu to include that (you need just > pci ID lspci -n will tell) Again, this board should have native code for bringing a basic vga textmode to life. Luc Verhaegen. -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
