Hello folks, I am trying to find or build a version of U-Boot I can load via serial, to program a blank flash chip on the DM355 EVM (I don't have a BDI2000).
I'm using "Sergey's dv-boot" and have that loading the UBL and U-Boot, using the u-boot sources supplied with the DVEVM and dm355_evm_config, but u-boot is unresponsive. Finding this: http://www.mail-archive.com/davinci-linux-open-source@linux.davincidsp.com/msg01958.html I uncommented #undef CONFIG_INIT_CRITICAL (#define CONFIG_SKIP_LOWLEVEL_INIT is already there) but no joy. Any pointers would be appreciated, I am a newbie to u-boot and would ideally prefer not to have to learn all its inner workings at this stage. Comments along the lines of "give up and buy a BDI2000" will be seriously considered. -- Jon Povey, Design Engineer Racelogic Limited Racelogic is a limited company registered in England. Registered number 2743719. Registered Office 5 Little Balmer, Buckingham Ind Pk, Buckingham MK18 1TF. The information contained in this electronic mail transmission is intended by Racelogic Ltd for the use of the named individual or entity to which it is directed and may contain information that is confidential or privileged. If you have received this electronic mail transmission in error, please delete it from your system without copying or forwarding it, and notify the sender of the error by reply email so that the sender's address records can be corrected. The views expressed by the sender of this communication do not necessarily represent those of Racelogic Ltd. Please note that Racelogic reserves the right to monitor e-mail communications passing through its network _______________________________________________ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source