My setup:
linux (2.4.10)
perl 5.6.1 (output of perl -V attached)
Perl works fine (insofar as I've tested it with a few scripts), and I
originally tried to install DBI from CPAN:
perl -MCPAN -e shell
shell%> install DBI
but it didn't take; I can't remember the errors.
Then I downloaded the source (DBI-1.20.tar.gz) and tried to compile it,
after of course reading the README's and looking at the documentation.
'perl Makefile.PL' and 'make' went ok, but 'make test' failed.
I did a search on the error message: 'Cannot write to /tmp/dbiproxy.pid'
(the first of the errors which caught my eye) but couldn't find anything
helpful.
any ideas?
I've attached the following:
-the Makefile from 'perl Makefile.PL'
-output of perl -V
-output of 'make test TEST_VERBOSE=1'
Thanks,
Chris
Summary of my perl5 (revision 5.0 version 6 subversion 1) configuration:
Platform:
osname=linux, osvers=2.4.10-4gb, archname=i686-linux
uname='linux kelly.valueclick.com 2.4.10-4gb #1 fri sep 28 17:20:21 gmt 2001 i686
unknown '
config_args='-des -Dprefix=/home/csolomon/apps/perl'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=undef d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-fno-strict-aliasing -I/usr/local/include'
ccversion='', gccversion='2.95.3 20010315 (SuSE)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, usemymalloc=n, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lndbm -lgdbm -ldb -ldl -lm -lc -lcrypt -lutil
perllibs=-lnsl -ldl -lm -lc -lcrypt -lutil
libc=, so=so, useshrplib=false, libperl=libperl.a
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-rdynamic'
cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: USE_LARGE_FILES
Built under linux
Compiled at Dec 27 2001 10:15:16
@INC:
/home/csolomon/apps/perl/lib/5.6.1/i686-linux
/home/csolomon/apps/perl/lib/5.6.1
/home/csolomon/apps/perl/lib/site_perl/5.6.1/i686-linux
/home/csolomon/apps/perl/lib/site_perl/5.6.1
/home/csolomon/apps/perl/lib/site_perl
.
PERL_DL_NONLAZY=1 /home/csolomon/apps/perl/bin/perl -Iblib/arch -Iblib/lib
-I/home/csolomon/apps/perl/lib/5.6.1/i686-linux -I/home/csolomon/apps/perl/lib/5.6.1
-e 'use Test::Harness qw(&runtests $verbose); $verbose=1; runtests @ARGV;' t/*.t
t/basics............1..31
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok 14
ok 15
ok 16
ok 17
ok 18
ok 19
ok 20
ok 21
ok 22
ok 23
ok 24
ok 25
ok 26
ok 27
ok 28
ok 29
ok 30
ok 31
ok
t/dbidrv............1..17
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok 14
ok 15
ok 16
ok 17
ok
t/examp.............1..175
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok 14
ok 15
ok 16
ok 17
ok 18
ok 19
ok 20
ok 21
ok 22
ok 23
ok 24
ok 25
ok 26
ok 27
ok 28
ok 29
ok 30
ok 31
ok 32
ok 33
ok 34
ok 35
ok 36
ok 37
ok 38
ok 39
ok 40
ok 41
ok 42
ok 43
ok 44
ok 45
ok 46
Taint attribute tests skipped
ok 47
ok 48
ok 49
ok 50
ok 51
ok 52
ok 53
ok 54
fetchrow_hashref('NAME_uc')
ok 55
ok 56
ok 57
ok 58
ok 59
FetchHashKeyName
ok 60
ok 61
ok 62
ok 63
ok 64
ok 65
fetchall_arrayref
ok 66
ok 67
ok 68
ok 69
ok 70
ok 71
fetchall_arrayref array slice
ok 72
ok 73
ok 74
ok 75
fetchall_arrayref hash slice
ok 76
ok 77
ok 78
ok 79
fetchall_arrayref hash
ok 80
ok 81
ok 82
ok 83
ok 84
ok 85
selectrow_array
ok 86
ok 87
selectrow_hashref
ok 88
ok 89
ok 90
ok 91
selectall_arrayref
ok 92
ok 93
ok 94
ok 95
selectall_arrayref Slice array slice
ok 96
ok 97
ok 98
ok 99
selectall_arrayref Columns array slice
ok 100
ok 101
ok 102
ok 103
selectall_arrayref hash slice
ok 104
ok 105
ok 106
ok 107
ok 108
ok 109
ok 110
selectall_hashref
ok 111
ok 112
ok 113
ok 114
selectall_hashref by column number
ok 115
ok 116
selectcol_arrayref
ok 117
ok 118
ok 119
selectcol_arrayref column slice
ok 120
ok 121
ok 122
ok 123
begin_work...
ok 124
ok 125
ok 126
ok 127
ok 128
ok 129
ok 130
ok 131
ok 132
ok 133
others...
ok 134
ok 135
RaiseError & PrintError & ShowErrorStatement
ok 136
ok 137
ok 138
ok 139
ok 140
ok 141
ok 142
ok 143
ok 144
ok 145
ok 146
ok 147
ok 148
ok 149
ok 150
ok 151
dump_results
ok 152
ok 153
ok 154
ok 155
table_info
ok 156
ok 157
ok 158
ok 159
ok 160
ok 161
Testing the fake directories (0).
ok 162
ok 163
ok 164
ok 165
Testing the fake directories (100).
ok 166
ok 167
ok 168
ok 169
Testing the fake directories (200).
ok 170
ok 171
ok 172
ok 173
ok 174
Testing $dbh->func().
ok 175
ok
t/meta..............1..6
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok
t/preparse..........1..2
ok 1
ok 2
ok
t/proxy.............Starting server: /home/csolomon/apps/perl/bin/perl -Iblib/lib
-Iblib/arch dbiproxy --test --configfile dbiproxy0.conf --mode=single --debug
--timeout=60
1..111
Making a first connection and closing it immediately.
not ok 1
Connect error: Cannot log in to DBI::ProxyServer: Cannot connect: Connection refused
at /home/csolomon/apps/perl/lib/site_perl/5.6.1/RPC/PlClient.pm line 74. at
/home/csolomon/apps/perl/lib/site_perl/5.6.1/Net/Daemon/Log.pm line 130.
Making a second connection.
not ok 2
Connect error: Cannot log in to DBI::ProxyServer: Cannot connect: Connection refused
at /home/csolomon/apps/perl/lib/site_perl/5.6.1/RPC/PlClient.pm line 74. at
/home/csolomon/apps/perl/lib/site_perl/5.6.1/Net/Daemon/Log.pm line 130.
Setting AutoCommit
ok 3
ok 4
Doing a ping.
dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1-2, 5-111
Failed 109/111 tests, 1.80% okay
t/shell.............1..3
ok 1
DBI::Shell 11.02 using DBI 1.20
ok 2
ok 3
ok
t/subclass..........1..6
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok
Failed Test Status Wstat Total Fail Failed List of Failed
--------------------------------------------------------------------------------
t/proxy.t 255 65280 111 109 98.20% 1-2, 5-111
-----
Error that followed:
-----
Cannot write to /tmp/dbiproxy.pid: Permission denied at
/home/csolomon/apps/perl/lib/site_perl/5.6.1/Net/Daemon.pm line 550. at
/home/csolomon/apps/perl/lib/site_perl/5.6.1/Net/Daemon/Log.pm line 130.
Can't call method "ping" on unblessed reference at t/proxy.t line 87.
Failed 1/8 test scripts, 87.50% okay. 109/351 subtests failed, 68.95% okay.
make: *** [test_dynamic] Error 29
# This Makefile is for the DBI extension to perl.
#
# It was generated automatically by MakeMaker version
# 5.45 (Revision: 1.222) from the contents of
# Makefile.PL. Don't edit this file, edit Makefile.PL instead.
#
# ANY CHANGES MADE HERE WILL BE LOST!
#
# MakeMaker ARGV: ()
#
# MakeMaker Parameters:
# ABSTRACT_FROM => q[DBI.pm]
# AUTHOR => q[Tim Bunce ([EMAIL PROTECTED])]
# DEFINE => q[ -DDBI_NO_THREADS]
# DIR => []
# EXE_FILES => [q[dbish], q[dbiproxy]]
# NAME => q[DBI]
# VERSION_FROM => q[DBI.pm]
# clean => { FILES=>q[$(DISTVNAME) Perl.xsi dbish dbiproxy ndtest.prt] }
# dist => { DIST_DEFAULT=>q[clean distcheck disttest ci tardist],
PREOP=>q[$(MAKE) -f Makefile.old distdir], COMPRESS=>q[gzip -v9], SUFFIX=>q[gz] }
# dynamic_lib => { OTHERLDFLAGS=>q[0] }
# --- MakeMaker post_initialize section:
# --- MakeMaker const_config section:
# These definitions are from config.sh (via
/home/csolomon/apps/perl/lib/5.6.1/i686-linux/Config.pm)
# They may have been overridden via Makefile.PL or on the command line
AR = ar
CC = cc
CCCDLFLAGS = -fpic
CCDLFLAGS = -rdynamic
DLEXT = so
DLSRC = dl_dlopen.xs
LD = cc
LDDLFLAGS = -shared -L/usr/local/lib
LDFLAGS = -L/usr/local/lib
LIBC =
LIB_EXT = .a
OBJ_EXT = .o
OSNAME = linux
OSVERS = 2.4.10-4gb
RANLIB = :
SO = so
EXE_EXT =
FULL_AR = /usr/bin/ar
# --- MakeMaker constants section:
AR_STATIC_ARGS = cr
NAME = DBI
DISTNAME = DBI
NAME_SYM = DBI
VERSION = 1.20
VERSION_SYM = 1_20
XS_VERSION = 1.20
INST_BIN = blib/bin
INST_EXE = blib/script
INST_LIB = blib/lib
INST_ARCHLIB = blib/arch
INST_SCRIPT = blib/script
PREFIX = /home/csolomon/apps/perl
INSTALLDIRS = site
INSTALLPRIVLIB = $(PREFIX)/lib/5.6.1
INSTALLARCHLIB = $(PREFIX)/lib/5.6.1/i686-linux
INSTALLSITELIB = $(PREFIX)/lib/site_perl/5.6.1
INSTALLSITEARCH = $(PREFIX)/lib/site_perl/5.6.1/i686-linux
INSTALLBIN = $(PREFIX)/bin
INSTALLSCRIPT = $(PREFIX)/bin
PERL_LIB = /home/csolomon/apps/perl/lib/5.6.1
PERL_ARCHLIB = /home/csolomon/apps/perl/lib/5.6.1/i686-linux
SITELIBEXP = /home/csolomon/apps/perl/lib/site_perl/5.6.1
SITEARCHEXP = /home/csolomon/apps/perl/lib/site_perl/5.6.1/i686-linux
LIBPERL_A = libperl.a
FIRST_MAKEFILE = Makefile
MAKE_APERL_FILE = Makefile.aperl
PERLMAINCC = $(CC)
PERL_INC = /home/csolomon/apps/perl/lib/5.6.1/i686-linux/CORE
PERL = /home/csolomon/apps/perl/bin/perl
FULLPERL = /home/csolomon/apps/perl/bin/perl
FULL_AR = /usr/bin/ar
VERSION_MACRO = VERSION
DEFINE_VERSION = -D$(VERSION_MACRO)=\"$(VERSION)\"
XS_VERSION_MACRO = XS_VERSION
XS_DEFINE_VERSION = -D$(XS_VERSION_MACRO)=\"$(XS_VERSION)\"
PERL_MALLOC_DEF = -DPERL_EXTMALLOC_DEF -Dmalloc=Perl_malloc -Dfree=Perl_mfree
-Drealloc=Perl_realloc -Dcalloc=Perl_calloc
MAKEMAKER = /home/csolomon/apps/perl/lib/5.6.1/ExtUtils/MakeMaker.pm
MM_VERSION = 5.45
# FULLEXT = Pathname for extension directory (eg Foo/Bar/Oracle).
# BASEEXT = Basename part of FULLEXT. May be just equal FULLEXT. (eg Oracle)
# ROOTEXT = Directory part of FULLEXT with leading slash (eg /DBD) !!! Deprecated
from MM 5.32 !!!
# PARENT_NAME = NAME without BASEEXT and no trailing :: (eg Foo::Bar)
# DLBASE = Basename part of dynamic library. May be just equal BASEEXT.
FULLEXT = DBI
BASEEXT = DBI
DLBASE = $(BASEEXT)
VERSION_FROM = DBI.pm
DEFINE = -DDBI_NO_THREADS
OBJECT = $(BASEEXT)$(OBJ_EXT)
LDFROM = $(OBJECT)
LINKTYPE = dynamic
# Handy lists of source code files:
XS_FILES= DBI.xs \
Perl.xs
C_FILES = DBI.c \
Perl.c
O_FILES = DBI.o \
Perl.o
H_FILES = DBIXS.h \
dbd_xsh.h \
dbi_sql.h \
dbipport.h
HTMLLIBPODS =
HTMLSCRIPTPODS =
MAN1PODS = dbiproxy \
dbish
MAN3PODS = DBI.pm \
lib/Bundle/DBI.pm \
lib/DBD/Proxy.pm \
lib/DBI/DBD.pm \
lib/DBI/FAQ.pm \
lib/DBI/Format.pm \
lib/DBI/ProxyServer.pm \
lib/DBI/Shell.pm \
lib/DBI/W32ODBC.pm \
lib/Win32/DBIODBC.pm
HTMLEXT = html
INST_MAN1DIR = blib/man1
INSTALLMAN1DIR = $(PREFIX)/man/man1
MAN1EXT = 1
INST_MAN3DIR = blib/man3
INSTALLMAN3DIR = $(PREFIX)/man/man3
MAN3EXT = 3
PERM_RW = 644
PERM_RWX = 755
# work around a famous dec-osf make(1) feature(?):
makemakerdflt: all
.SUFFIXES: .xs .c .C .cpp .cxx .cc $(OBJ_EXT)
# Nick wanted to get rid of .PRECIOUS. I don't remember why. I seem to recall, that
# some make implementations will delete the Makefile when we rebuild it. Because
# we call false(1) when we rebuild it. So make(1) is not completely wrong when it
# does so. Our milage may vary.
# .PRECIOUS: Makefile # seems to be not necessary anymore
.PHONY: all config static dynamic test linkext manifest
# Where is the Config information that we are using/depend on
CONFIGDEP = $(PERL_ARCHLIB)/Config.pm $(PERL_INC)/config.h
# Where to put things:
INST_LIBDIR = $(INST_LIB)
INST_ARCHLIBDIR = $(INST_ARCHLIB)
INST_AUTODIR = $(INST_LIB)/auto/$(FULLEXT)
INST_ARCHAUTODIR = $(INST_ARCHLIB)/auto/$(FULLEXT)
INST_STATIC = $(INST_ARCHAUTODIR)/$(BASEEXT)$(LIB_EXT)
INST_DYNAMIC = $(INST_ARCHAUTODIR)/$(DLBASE).$(DLEXT)
INST_BOOT = $(INST_ARCHAUTODIR)/$(BASEEXT).bs
EXPORT_LIST =
PERL_ARCHIVE =
PERL_ARCHIVE_AFTER =
TO_INST_PM = DBI.pm \
DBIXS.h \
Driver.xst \
dbd_xsh.h \
dbi_sql.h \
dbipport.h \
lib/Bundle/DBI.pm \
lib/DBD/ExampleP.pm \
lib/DBD/NullP.pm \
lib/DBD/Proxy.pm \
lib/DBD/Sponge.pm \
lib/DBI/DBD.pm \
lib/DBI/FAQ.pm \
lib/DBI/Format.pm \
lib/DBI/ProxyServer.pm \
lib/DBI/Shell.pm \
lib/DBI/W32ODBC.pm \
lib/Win32/DBIODBC.pm
PM_TO_BLIB = DBIXS.h \
$(INST_ARCHAUTODIR)/DBIXS.h \
lib/DBD/NullP.pm \
$(INST_LIB)/DBD/NullP.pm \
dbipport.h \
$(INST_ARCHAUTODIR)/dbipport.h \
dbd_xsh.h \
$(INST_ARCHAUTODIR)/dbd_xsh.h \
lib/DBI/Format.pm \
$(INST_LIB)/DBI/Format.pm \
lib/DBI/Shell.pm \
$(INST_LIB)/DBI/Shell.pm \
DBI.pm \
$(INST_LIBDIR)/DBI.pm \
lib/DBI/FAQ.pm \
$(INST_LIB)/DBI/FAQ.pm \
lib/DBD/ExampleP.pm \
$(INST_LIB)/DBD/ExampleP.pm \
lib/Bundle/DBI.pm \
$(INST_LIB)/Bundle/DBI.pm \
lib/Win32/DBIODBC.pm \
$(INST_LIB)/Win32/DBIODBC.pm \
lib/DBI/W32ODBC.pm \
$(INST_LIB)/DBI/W32ODBC.pm \
lib/DBI/DBD.pm \
$(INST_LIB)/DBI/DBD.pm \
lib/DBI/ProxyServer.pm \
$(INST_LIB)/DBI/ProxyServer.pm \
lib/DBD/Proxy.pm \
$(INST_LIB)/DBD/Proxy.pm \
dbi_sql.h \
$(INST_ARCHAUTODIR)/dbi_sql.h \
Driver.xst \
$(INST_ARCHAUTODIR)/Driver.xst \
lib/DBD/Sponge.pm \
$(INST_LIB)/DBD/Sponge.pm
# --- MakeMaker tool_autosplit section:
# Usage: $(AUTOSPLITFILE) FileToSplit AutoDirToSplitInto
AUTOSPLITFILE = $(PERL) "-I$(PERL_ARCHLIB)" "-I$(PERL_LIB)" -e 'use
AutoSplit;autosplit($$ARGV[0], $$ARGV[1], 0, 1, 1) ;'
# --- MakeMaker tool_xsubpp section:
XSUBPPDIR = /home/csolomon/apps/perl/lib/5.6.1/ExtUtils
XSUBPP = $(XSUBPPDIR)/xsubpp
XSPROTOARG =
XSUBPPDEPS = $(XSUBPPDIR)/typemap $(XSUBPP)
XSUBPPARGS = -typemap $(XSUBPPDIR)/typemap
# --- MakeMaker tools_other section:
SHELL = /bin/sh
CHMOD = chmod
CP = cp
LD = cc
MV = mv
NOOP = $(SHELL) -c true
RM_F = rm -f
RM_RF = rm -rf
TEST_F = test -f
TOUCH = touch
UMASK_NULL = umask 0
DEV_NULL = > /dev/null 2>&1
# The following is a portable way to say mkdir -p
# To see which directories are created, change the if 0 to if 1
MKPATH = $(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Command -e mkpath
# This helps us to minimize the effect of the .exists files A yet
# better solution would be to have a stable file in the perl
# distribution with a timestamp of zero. But this solution doesn't
# need any changes to the core distribution and works with older perls
EQUALIZE_TIMESTAMP = $(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Command -e
eqtime
# Here we warn users that an old packlist file was found somewhere,
# and that they should call some uninstall routine
WARN_IF_OLD_PACKLIST = $(PERL) -we 'exit unless -f $$ARGV[0];' \
-e 'print "WARNING: I have found an old package in\n";' \
-e 'print "\t$$ARGV[0].\n";' \
-e 'print "Please make sure the two installations are not conflicting\n";'
UNINST=0
VERBINST=0
MOD_INSTALL = $(PERL) -I$(INST_LIB) -I$(PERL_LIB) -MExtUtils::Install \
-e "install({@ARGV},'$(VERBINST)',0,'$(UNINST)');"
DOC_INSTALL = $(PERL) -e '$$\="\n\n";' \
-e 'print "=head2 ", scalar(localtime), ": C<", shift, ">", " L<", $$arg=shift, "|",
$$arg, ">";' \
-e 'print "=over 4";' \
-e 'while (defined($$key = shift) and defined($$val = shift)){print "=item *";print
"C<$$key: $$val>";}' \
-e 'print "=back";'
UNINSTALL = $(PERL) -MExtUtils::Install \
-e 'uninstall($$ARGV[0],1,1); print "\nUninstall is deprecated. Please check the";' \
-e 'print " packlist above carefully.\n There may be errors. Remove the";' \
-e 'print " appropriate files manually.\n Sorry for the inconveniences.\n"'
# --- MakeMaker dist section:
DISTVNAME = $(DISTNAME)-$(VERSION)
TAR = tar
TARFLAGS = cvf
ZIP = zip
ZIPFLAGS = -r
COMPRESS = gzip -v9
SUFFIX = gz
SHAR = shar
PREOP = $(MAKE) -f Makefile.old distdir
POSTOP = @$(NOOP)
TO_UNIX = @$(NOOP)
CI = ci -u
RCS_LABEL = rcs -Nv$(VERSION_SYM): -q
DIST_CP = best
DIST_DEFAULT = clean distcheck disttest ci tardist
# --- MakeMaker macro section:
# --- MakeMaker depend section:
# --- MakeMaker cflags section:
CCFLAGS = -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64
OPTIMIZE = -O2
PERLTYPE =
MPOLLUTE =
# --- MakeMaker const_loadlibs section:
# DBI might depend on some other libraries:
# See ExtUtils::Liblist for details
#
LD_RUN_PATH =
# --- MakeMaker const_cccmd section:
CCCMD = $(CC) -c $(INC) $(CCFLAGS) $(OPTIMIZE) \
$(PERLTYPE) $(MPOLLUTE) $(DEFINE_VERSION) \
$(XS_DEFINE_VERSION)
# --- MakeMaker post_constants section:
# This section was generated by DBI::DBD::dbd_postamble()
DBI_INST_DIR=.
DBI_INSTARCH_DIR=$(INST_ARCHAUTODIR)
DBI_DRIVER_XST=$(DBI_INSTARCH_DIR)/Driver.xst
# The main dependancy (technically correct but probably not used)
Perl.c: Perl.xsi
# This dependancy is needed since MakeMaker uses the .xs.o rule
Perl$(OBJ_EXT): Perl.xsi
Perl.xsi: $(DBI_DRIVER_XST)
$(PERL) -p -e "s/~DRIVER~/Perl/g" < $(DBI_DRIVER_XST) > Perl.xsi
DBI.c: Perl$(OBJ_EXT)
# --- MakeMaker pasthru section:
PASTHRU = LIB="$(LIB)"\
LIBPERL_A="$(LIBPERL_A)"\
LINKTYPE="$(LINKTYPE)"\
PREFIX="$(PREFIX)"\
OPTIMIZE="$(OPTIMIZE)"
# --- MakeMaker c_o section:
.c$(OBJ_EXT):
$(CCCMD) $(CCCDLFLAGS) -I$(PERL_INC) $(DEFINE) $*.c
.C$(OBJ_EXT):
$(CCCMD) $(CCCDLFLAGS) -I$(PERL_INC) $(DEFINE) $*.C
.cpp$(OBJ_EXT):
$(CCCMD) $(CCCDLFLAGS) -I$(PERL_INC) $(DEFINE) $*.cpp
.cxx$(OBJ_EXT):
$(CCCMD) $(CCCDLFLAGS) -I$(PERL_INC) $(DEFINE) $*.cxx
.cc$(OBJ_EXT):
$(CCCMD) $(CCCDLFLAGS) -I$(PERL_INC) $(DEFINE) $*.cc
# --- MakeMaker xs_c section:
.xs.c:
$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) $(XSUBPP) $(XSPROTOARG) $(XSUBPPARGS)
$*.xs > $*.xsc && $(MV) $*.xsc $*.c
# --- MakeMaker xs_o section:
.xs$(OBJ_EXT):
$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) $(XSUBPP) $(XSPROTOARG) $(XSUBPPARGS)
$*.xs > $*.xsc && $(MV) $*.xsc $*.c
$(CCCMD) $(CCCDLFLAGS) -I$(PERL_INC) $(DEFINE) $*.c
# --- MakeMaker top_targets section:
#all :: config $(INST_PM) subdirs linkext manifypods
all :: pure_all htmlifypods manifypods
@$(NOOP)
pure_all :: config pm_to_blib subdirs linkext
@$(NOOP)
subdirs :: $(MYEXTLIB)
@$(NOOP)
config :: Makefile $(INST_LIBDIR)/.exists
@$(NOOP)
config :: $(INST_ARCHAUTODIR)/.exists
@$(NOOP)
config :: $(INST_AUTODIR)/.exists
@$(NOOP)
$(INST_AUTODIR)/.exists :: /home/csolomon/apps/perl/lib/5.6.1/i686-linux/CORE/perl.h
@$(MKPATH) $(INST_AUTODIR)
@$(EQUALIZE_TIMESTAMP)
/home/csolomon/apps/perl/lib/5.6.1/i686-linux/CORE/perl.h $(INST_AUTODIR)/.exists
-@$(CHMOD) $(PERM_RWX) $(INST_AUTODIR)
$(INST_LIBDIR)/.exists :: /home/csolomon/apps/perl/lib/5.6.1/i686-linux/CORE/perl.h
@$(MKPATH) $(INST_LIBDIR)
@$(EQUALIZE_TIMESTAMP)
/home/csolomon/apps/perl/lib/5.6.1/i686-linux/CORE/perl.h $(INST_LIBDIR)/.exists
-@$(CHMOD) $(PERM_RWX) $(INST_LIBDIR)
$(INST_ARCHAUTODIR)/.exists ::
/home/csolomon/apps/perl/lib/5.6.1/i686-linux/CORE/perl.h
@$(MKPATH) $(INST_ARCHAUTODIR)
@$(EQUALIZE_TIMESTAMP)
/home/csolomon/apps/perl/lib/5.6.1/i686-linux/CORE/perl.h $(INST_ARCHAUTODIR)/.exists
-@$(CHMOD) $(PERM_RWX) $(INST_ARCHAUTODIR)
config :: $(INST_MAN1DIR)/.exists
@$(NOOP)
$(INST_MAN1DIR)/.exists :: /home/csolomon/apps/perl/lib/5.6.1/i686-linux/CORE/perl.h
@$(MKPATH) $(INST_MAN1DIR)
@$(EQUALIZE_TIMESTAMP)
/home/csolomon/apps/perl/lib/5.6.1/i686-linux/CORE/perl.h $(INST_MAN1DIR)/.exists
-@$(CHMOD) $(PERM_RWX) $(INST_MAN1DIR)
config :: $(INST_MAN3DIR)/.exists
@$(NOOP)
$(INST_MAN3DIR)/.exists :: /home/csolomon/apps/perl/lib/5.6.1/i686-linux/CORE/perl.h
@$(MKPATH) $(INST_MAN3DIR)
@$(EQUALIZE_TIMESTAMP)
/home/csolomon/apps/perl/lib/5.6.1/i686-linux/CORE/perl.h $(INST_MAN3DIR)/.exists
-@$(CHMOD) $(PERM_RWX) $(INST_MAN3DIR)
$(O_FILES): $(H_FILES)
help:
perldoc ExtUtils::MakeMaker
Version_check:
@$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) \
-MExtUtils::MakeMaker=Version_check \
-e "Version_check('$(MM_VERSION)')"
# --- MakeMaker linkext section:
linkext :: $(LINKTYPE)
@$(NOOP)
# --- MakeMaker dlsyms section:
# --- MakeMaker dynamic section:
## $(INST_PM) has been moved to the all: target.
## It remains here for awhile to allow for old usage: "make dynamic"
#dynamic :: Makefile $(INST_DYNAMIC) $(INST_BOOT) $(INST_PM)
dynamic :: Makefile $(INST_DYNAMIC) $(INST_BOOT)
@$(NOOP)
# --- MakeMaker dynamic_bs section:
BOOTSTRAP = DBI.bs
# As Mkbootstrap might not write a file (if none is required)
# we use touch to prevent make continually trying to remake it.
# The DynaLoader only reads a non-empty file.
$(BOOTSTRAP): Makefile $(INST_ARCHAUTODIR)/.exists
@echo "Running Mkbootstrap for $(NAME) ($(BSLOADLIBS))"
@$(PERL) "-I$(PERL_ARCHLIB)" "-I$(PERL_LIB)" \
-MExtUtils::Mkbootstrap \
-e "Mkbootstrap('$(BASEEXT)','$(BSLOADLIBS)');"
@$(TOUCH) $(BOOTSTRAP)
$(CHMOD) $(PERM_RW) $@
$(INST_BOOT): $(BOOTSTRAP) $(INST_ARCHAUTODIR)/.exists
@rm -rf $(INST_BOOT)
-cp $(BOOTSTRAP) $(INST_BOOT)
$(CHMOD) $(PERM_RW) $@
# --- MakeMaker dynamic_lib section:
# This section creates the dynamically loadable $(INST_DYNAMIC)
# from $(OBJECT) and possibly $(MYEXTLIB).
ARMAYBE = :
OTHERLDFLAGS =
INST_DYNAMIC_DEP =
$(INST_DYNAMIC): $(OBJECT) $(MYEXTLIB) $(BOOTSTRAP) $(INST_ARCHAUTODIR)/.exists
$(EXPORT_LIST) $(PERL_ARCHIVE) $(PERL_ARCHIVE_AFTER) $(INST_DYNAMIC_DEP)
$(RM_F) $@
LD_RUN_PATH="$(LD_RUN_PATH)" $(LD) $(LDDLFLAGS) $(LDFROM) $(OTHERLDFLAGS) -o
$@ $(MYEXTLIB) $(PERL_ARCHIVE) $(LDLOADLIBS) $(PERL_ARCHIVE_AFTER) $(EXPORT_LIST)
$(CHMOD) $(PERM_RWX) $@
# --- MakeMaker static section:
## $(INST_PM) has been moved to the all: target.
## It remains here for awhile to allow for old usage: "make static"
#static :: Makefile $(INST_STATIC) $(INST_PM)
static :: Makefile $(INST_STATIC)
@$(NOOP)
# --- MakeMaker static_lib section:
$(INST_STATIC): $(OBJECT) $(MYEXTLIB) $(INST_ARCHAUTODIR)/.exists
$(RM_RF) $@
$(FULL_AR) $(AR_STATIC_ARGS) $@ $(OBJECT) && $(RANLIB) $@
$(CHMOD) $(PERM_RWX) $@
@echo "$(EXTRALIBS)" > $(INST_ARCHAUTODIR)/extralibs.ld
# --- MakeMaker htmlifypods section:
htmlifypods : pure_all
@$(NOOP)
# --- MakeMaker manifypods section:
POD2MAN_EXE = /home/csolomon/apps/perl/bin/pod2man
POD2MAN = $(PERL) -we '%m=@ARGV;for (keys %m){' \
-e 'next if -e $$m{$$_} && -M $$m{$$_} < -M $$_ && -M $$m{$$_} < -M "Makefile";' \
-e 'print "Manifying $$m{$$_}\n";' \
-e 'system(qq[$$^X ].q["-I$(PERL_ARCHLIB)" "-I$(PERL_LIB)" $(POD2MAN_EXE)
].qq[$$_>$$m{$$_}])==0 or warn "Couldn\047t install $$m{$$_}\n";' \
-e 'chmod(oct($(PERM_RW))), $$m{$$_} or warn "chmod $(PERM_RW) $$m{$$_}: $$!\n";}'
manifypods : pure_all dbiproxy \
dbish \
lib/DBD/Proxy.pm \
lib/DBI/ProxyServer.pm \
lib/DBI/Format.pm \
lib/DBI/Shell.pm \
DBI.pm \
lib/DBI/FAQ.pm \
lib/Bundle/DBI.pm \
lib/Win32/DBIODBC.pm \
lib/DBI/W32ODBC.pm \
lib/DBI/DBD.pm
@$(POD2MAN) \
dbiproxy \
$(INST_MAN1DIR)/dbiproxy.$(MAN1EXT) \
dbish \
$(INST_MAN1DIR)/dbish.$(MAN1EXT) \
lib/DBD/Proxy.pm \
$(INST_MAN3DIR)/DBD::Proxy.$(MAN3EXT) \
lib/DBI/ProxyServer.pm \
$(INST_MAN3DIR)/DBI::ProxyServer.$(MAN3EXT) \
lib/DBI/Format.pm \
$(INST_MAN3DIR)/DBI::Format.$(MAN3EXT) \
lib/DBI/Shell.pm \
$(INST_MAN3DIR)/DBI::Shell.$(MAN3EXT) \
DBI.pm \
$(INST_MAN3DIR)/DBI.$(MAN3EXT) \
lib/DBI/FAQ.pm \
$(INST_MAN3DIR)/DBI::FAQ.$(MAN3EXT) \
lib/Bundle/DBI.pm \
$(INST_MAN3DIR)/Bundle::DBI.$(MAN3EXT) \
lib/Win32/DBIODBC.pm \
$(INST_MAN3DIR)/Win32::DBIODBC.$(MAN3EXT) \
lib/DBI/W32ODBC.pm \
$(INST_MAN3DIR)/DBI::W32ODBC.$(MAN3EXT) \
lib/DBI/DBD.pm \
$(INST_MAN3DIR)/DBI::DBD.$(MAN3EXT)
# --- MakeMaker processPL section:
all :: dbiproxy
@$(NOOP)
dbiproxy :: dbiproxy.PL
$(PERL) -I$(INST_ARCHLIB) -I$(INST_LIB) -I$(PERL_ARCHLIB) -I$(PERL_LIB)
dbiproxy.PL dbiproxy
all :: dbish
@$(NOOP)
dbish :: dbish.PL
$(PERL) -I$(INST_ARCHLIB) -I$(INST_LIB) -I$(PERL_ARCHLIB) -I$(PERL_LIB)
dbish.PL dbish
# --- MakeMaker installbin section:
$(INST_SCRIPT)/.exists :: /home/csolomon/apps/perl/lib/5.6.1/i686-linux/CORE/perl.h
@$(MKPATH) $(INST_SCRIPT)
@$(EQUALIZE_TIMESTAMP)
/home/csolomon/apps/perl/lib/5.6.1/i686-linux/CORE/perl.h $(INST_SCRIPT)/.exists
-@$(CHMOD) $(PERM_RWX) $(INST_SCRIPT)
EXE_FILES = dbish dbiproxy
FIXIN = $(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::MakeMaker \
-e "MY->fixin(shift)"
pure_all :: $(INST_SCRIPT)/dbiproxy $(INST_SCRIPT)/dbish
@$(NOOP)
realclean ::
rm -f $(INST_SCRIPT)/dbiproxy $(INST_SCRIPT)/dbish
$(INST_SCRIPT)/dbiproxy: dbiproxy Makefile $(INST_SCRIPT)/.exists
@rm -f $(INST_SCRIPT)/dbiproxy
cp dbiproxy $(INST_SCRIPT)/dbiproxy
$(FIXIN) $(INST_SCRIPT)/dbiproxy
-@$(CHMOD) $(PERM_RWX) $(INST_SCRIPT)/dbiproxy
$(INST_SCRIPT)/dbish: dbish Makefile $(INST_SCRIPT)/.exists
@rm -f $(INST_SCRIPT)/dbish
cp dbish $(INST_SCRIPT)/dbish
$(FIXIN) $(INST_SCRIPT)/dbish
-@$(CHMOD) $(PERM_RWX) $(INST_SCRIPT)/dbish
# --- MakeMaker subdirs section:
# none
# --- MakeMaker clean section:
# Delete temporary files but do not touch installed files. We don't delete
# the Makefile here so a later make realclean still has a makefile to use.
clean ::
-rm -rf DBI.c Perl.c $(DISTVNAME) Perl.xsi dbish dbiproxy ndtest.prt ./blib
$(MAKE_APERL_FILE) $(INST_ARCHAUTODIR)/extralibs.all perlmain.c mon.out core
core.*perl.*.? *perl.core so_locations pm_to_blib *$(OBJ_EXT) *$(LIB_EXT) perl.exe
$(BOOTSTRAP) $(BASEEXT).bso $(BASEEXT).def $(BASEEXT).exp
-mv Makefile Makefile.old $(DEV_NULL)
# --- MakeMaker realclean section:
# Delete temporary files (via clean) and also delete installed files
realclean purge :: clean
rm -rf $(INST_AUTODIR) $(INST_ARCHAUTODIR)
rm -f $(INST_DYNAMIC) $(INST_BOOT)
rm -f $(INST_STATIC)
rm -f $(INST_ARCHAUTODIR)/DBIXS.h $(INST_LIB)/DBD/NullP.pm
rm -f $(INST_ARCHAUTODIR)/dbipport.h $(INST_ARCHAUTODIR)/dbd_xsh.h
rm -f $(INST_LIB)/DBI/Format.pm $(INST_LIB)/DBI/Shell.pm $(INST_LIBDIR)/DBI.pm
rm -f $(INST_LIB)/DBI/FAQ.pm $(INST_LIB)/DBD/ExampleP.pm
$(INST_LIB)/Bundle/DBI.pm
rm -f $(INST_LIB)/Win32/DBIODBC.pm $(INST_LIB)/DBI/W32ODBC.pm
$(INST_LIB)/DBI/DBD.pm
rm -f $(INST_LIB)/DBI/ProxyServer.pm $(INST_LIB)/DBD/Proxy.pm
rm -f $(INST_ARCHAUTODIR)/dbi_sql.h $(INST_ARCHAUTODIR)/Driver.xst
rm -f $(INST_LIB)/DBD/Sponge.pm
rm -rf Makefile Makefile.old
# --- MakeMaker dist_basics section:
distclean :: realclean distcheck
distcheck :
$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Manifest=fullcheck \
-e fullcheck
skipcheck :
$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Manifest=skipcheck \
-e skipcheck
manifest :
$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Manifest=mkmanifest \
-e mkmanifest
veryclean : realclean
$(RM_F) *~ *.orig */*~ */*.orig
# --- MakeMaker dist_core section:
dist : $(DIST_DEFAULT)
@$(PERL) -le 'print "Warning: Makefile possibly out of date with $$vf" if ' \
-e '-e ($$vf="$(VERSION_FROM)") and -M $$vf < -M "Makefile";'
tardist : $(DISTVNAME).tar$(SUFFIX)
zipdist : $(DISTVNAME).zip
$(DISTVNAME).tar$(SUFFIX) : distdir
$(PREOP)
$(TO_UNIX)
$(TAR) $(TARFLAGS) $(DISTVNAME).tar $(DISTVNAME)
$(RM_RF) $(DISTVNAME)
$(COMPRESS) $(DISTVNAME).tar
$(POSTOP)
$(DISTVNAME).zip : distdir
$(PREOP)
$(ZIP) $(ZIPFLAGS) $(DISTVNAME).zip $(DISTVNAME)
$(RM_RF) $(DISTVNAME)
$(POSTOP)
uutardist : $(DISTVNAME).tar$(SUFFIX)
uuencode $(DISTVNAME).tar$(SUFFIX) \
$(DISTVNAME).tar$(SUFFIX) > \
$(DISTVNAME).tar$(SUFFIX)_uu
shdist : distdir
$(PREOP)
$(SHAR) $(DISTVNAME) > $(DISTVNAME).shar
$(RM_RF) $(DISTVNAME)
$(POSTOP)
# --- MakeMaker dist_dir section:
distdir :
$(RM_RF) $(DISTVNAME)
$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Manifest=manicopy,maniread
\
-e "manicopy(maniread(),'$(DISTVNAME)', '$(DIST_CP)');"
# --- MakeMaker dist_test section:
disttest : distdir
cd $(DISTVNAME) && $(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) Makefile.PL
cd $(DISTVNAME) && $(MAKE)
cd $(DISTVNAME) && $(MAKE) test
# --- MakeMaker dist_ci section:
ci :
$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Manifest=maniread \
-e "@all = keys %{ maniread() };" \
-e 'print("Executing $(CI) @all\n"); system("$(CI) @all");' \
-e 'print("Executing $(RCS_LABEL) ...\n"); system("$(RCS_LABEL)
@all");'
# --- MakeMaker install section:
install :: all pure_install doc_install
install_perl :: all pure_perl_install doc_perl_install
install_site :: all pure_site_install doc_site_install
install_ :: install_site
@echo INSTALLDIRS not defined, defaulting to INSTALLDIRS=site
pure_install :: pure_$(INSTALLDIRS)_install
doc_install :: doc_$(INSTALLDIRS)_install
@echo Appending installation info to $(INSTALLARCHLIB)/perllocal.pod
pure__install : pure_site_install
@echo INSTALLDIRS not defined, defaulting to INSTALLDIRS=site
doc__install : doc_site_install
@echo INSTALLDIRS not defined, defaulting to INSTALLDIRS=site
pure_perl_install ::
@$(MOD_INSTALL) \
read $(PERL_ARCHLIB)/auto/$(FULLEXT)/.packlist \
write $(INSTALLARCHLIB)/auto/$(FULLEXT)/.packlist \
$(INST_LIB) $(INSTALLPRIVLIB) \
$(INST_ARCHLIB) $(INSTALLARCHLIB) \
$(INST_BIN) $(INSTALLBIN) \
$(INST_SCRIPT) $(INSTALLSCRIPT) \
$(INST_HTMLLIBDIR) $(INSTALLHTMLPRIVLIBDIR) \
$(INST_HTMLSCRIPTDIR) $(INSTALLHTMLSCRIPTDIR) \
$(INST_MAN1DIR) $(INSTALLMAN1DIR) \
$(INST_MAN3DIR) $(INSTALLMAN3DIR)
@$(WARN_IF_OLD_PACKLIST) \
$(SITEARCHEXP)/auto/$(FULLEXT)
pure_site_install ::
@$(MOD_INSTALL) \
read $(SITEARCHEXP)/auto/$(FULLEXT)/.packlist \
write $(INSTALLSITEARCH)/auto/$(FULLEXT)/.packlist \
$(INST_LIB) $(INSTALLSITELIB) \
$(INST_ARCHLIB) $(INSTALLSITEARCH) \
$(INST_BIN) $(INSTALLBIN) \
$(INST_SCRIPT) $(INSTALLSCRIPT) \
$(INST_HTMLLIBDIR) $(INSTALLHTMLSITELIBDIR) \
$(INST_HTMLSCRIPTDIR) $(INSTALLHTMLSCRIPTDIR) \
$(INST_MAN1DIR) $(INSTALLMAN1DIR) \
$(INST_MAN3DIR) $(INSTALLMAN3DIR)
@$(WARN_IF_OLD_PACKLIST) \
$(PERL_ARCHLIB)/auto/$(FULLEXT)
doc_perl_install ::
-@$(MKPATH) $(INSTALLARCHLIB)
-@$(DOC_INSTALL) \
"Module" "$(NAME)" \
"installed into" "$(INSTALLPRIVLIB)" \
LINKTYPE "$(LINKTYPE)" \
VERSION "$(VERSION)" \
EXE_FILES "$(EXE_FILES)" \
>> $(INSTALLARCHLIB)/perllocal.pod
doc_site_install ::
-@$(MKPATH) $(INSTALLARCHLIB)
-@$(DOC_INSTALL) \
"Module" "$(NAME)" \
"installed into" "$(INSTALLSITELIB)" \
LINKTYPE "$(LINKTYPE)" \
VERSION "$(VERSION)" \
EXE_FILES "$(EXE_FILES)" \
>> $(INSTALLARCHLIB)/perllocal.pod
uninstall :: uninstall_from_$(INSTALLDIRS)dirs
uninstall_from_perldirs ::
@$(UNINSTALL) $(PERL_ARCHLIB)/auto/$(FULLEXT)/.packlist
uninstall_from_sitedirs ::
@$(UNINSTALL) $(SITEARCHEXP)/auto/$(FULLEXT)/.packlist
# --- MakeMaker force section:
# Phony target to force checking subdirectories.
FORCE:
@$(NOOP)
# --- MakeMaker perldepend section:
PERL_HDRS = \
$(PERL_INC)/EXTERN.h \
$(PERL_INC)/INTERN.h \
$(PERL_INC)/XSUB.h \
$(PERL_INC)/av.h \
$(PERL_INC)/cc_runtime.h \
$(PERL_INC)/config.h \
$(PERL_INC)/cop.h \
$(PERL_INC)/cv.h \
$(PERL_INC)/dosish.h \
$(PERL_INC)/embed.h \
$(PERL_INC)/embedvar.h \
$(PERL_INC)/fakethr.h \
$(PERL_INC)/form.h \
$(PERL_INC)/gv.h \
$(PERL_INC)/handy.h \
$(PERL_INC)/hv.h \
$(PERL_INC)/intrpvar.h \
$(PERL_INC)/iperlsys.h \
$(PERL_INC)/keywords.h \
$(PERL_INC)/mg.h \
$(PERL_INC)/nostdio.h \
$(PERL_INC)/objXSUB.h \
$(PERL_INC)/op.h \
$(PERL_INC)/opcode.h \
$(PERL_INC)/opnames.h \
$(PERL_INC)/patchlevel.h \
$(PERL_INC)/perl.h \
$(PERL_INC)/perlapi.h \
$(PERL_INC)/perlio.h \
$(PERL_INC)/perlsdio.h \
$(PERL_INC)/perlsfio.h \
$(PERL_INC)/perlvars.h \
$(PERL_INC)/perly.h \
$(PERL_INC)/pp.h \
$(PERL_INC)/pp_proto.h \
$(PERL_INC)/proto.h \
$(PERL_INC)/regcomp.h \
$(PERL_INC)/regexp.h \
$(PERL_INC)/regnodes.h \
$(PERL_INC)/scope.h \
$(PERL_INC)/sv.h \
$(PERL_INC)/thrdvar.h \
$(PERL_INC)/thread.h \
$(PERL_INC)/unixish.h \
$(PERL_INC)/utf8.h \
$(PERL_INC)/util.h \
$(PERL_INC)/warnings.h
$(OBJECT) : $(PERL_HDRS)
DBI.c Perl.c : $(XSUBPPDEPS)
# --- MakeMaker makefile section:
$(OBJECT) : $(FIRST_MAKEFILE)
# We take a very conservative approach here, but it\'s worth it.
# We move Makefile to Makefile.old here to avoid gnu make looping.
Makefile : Makefile.PL $(CONFIGDEP)
@echo "Makefile out-of-date with respect to $?"
@echo "Cleaning current config before rebuilding Makefile..."
-@$(RM_F) Makefile.old
-@$(MV) Makefile Makefile.old
-$(MAKE) -f Makefile.old clean $(DEV_NULL) || $(NOOP)
$(PERL) "-I$(PERL_ARCHLIB)" "-I$(PERL_LIB)" Makefile.PL
@echo "==> Your Makefile has been rebuilt. <=="
@echo "==> Please rerun the make command. <=="
false
# To change behavior to :: would be nice, but would break Tk b9.02
# so you find such a warning below the dist target.
#Makefile :: $(VERSION_FROM)
# @echo "Warning: Makefile possibly out of date with $(VERSION_FROM)"
# --- MakeMaker staticmake section:
# --- MakeMaker makeaperl section ---
MAP_TARGET = perl
FULLPERL = /home/csolomon/apps/perl/bin/perl
$(MAP_TARGET) :: static $(MAKE_APERL_FILE)
$(MAKE) -f $(MAKE_APERL_FILE) $@
$(MAKE_APERL_FILE) : $(FIRST_MAKEFILE)
@echo Writing \"$(MAKE_APERL_FILE)\" for this $(MAP_TARGET)
@$(PERL) -I$(INST_ARCHLIB) -I$(INST_LIB) -I$(PERL_ARCHLIB) -I$(PERL_LIB) \
Makefile.PL DIR= \
MAKEFILE=$(MAKE_APERL_FILE) LINKTYPE=static \
MAKEAPERL=1 NORECURS=1 CCCDLFLAGS=
# --- MakeMaker test section:
TEST_VERBOSE=0
TEST_TYPE=test_$(LINKTYPE)
TEST_FILE = test.pl
TEST_FILES = t/*.t
TESTDB_SW = -d
testdb :: testdb_$(LINKTYPE)
test :: $(TEST_TYPE)
test_dynamic :: pure_all
PERL_DL_NONLAZY=1 $(FULLPERL) -I$(INST_ARCHLIB) -I$(INST_LIB)
-I$(PERL_ARCHLIB) -I$(PERL_LIB) -e 'use Test::Harness qw(&runtests $$verbose);
$$verbose=$(TEST_VERBOSE); runtests @ARGV;' $(TEST_FILES)
PERL_DL_NONLAZY=1 $(FULLPERL) -I$(INST_ARCHLIB) -I$(INST_LIB)
-I$(PERL_ARCHLIB) -I$(PERL_LIB) $(TEST_FILE)
testdb_dynamic :: pure_all
PERL_DL_NONLAZY=1 $(FULLPERL) $(TESTDB_SW) -I$(INST_ARCHLIB) -I$(INST_LIB)
-I$(PERL_ARCHLIB) -I$(PERL_LIB) $(TEST_FILE)
test_ : test_dynamic
test_static :: pure_all $(MAP_TARGET)
PERL_DL_NONLAZY=1 ./$(MAP_TARGET) -I$(INST_ARCHLIB) -I$(INST_LIB)
-I$(PERL_ARCHLIB) -I$(PERL_LIB) -e 'use Test::Harness qw(&runtests $$verbose);
$$verbose=$(TEST_VERBOSE); runtests @ARGV;' $(TEST_FILES)
PERL_DL_NONLAZY=1 ./$(MAP_TARGET) -I$(INST_ARCHLIB) -I$(INST_LIB)
-I$(PERL_ARCHLIB) -I$(PERL_LIB) $(TEST_FILE)
testdb_static :: pure_all $(MAP_TARGET)
PERL_DL_NONLAZY=1 ./$(MAP_TARGET) $(TESTDB_SW) -I$(INST_ARCHLIB) -I$(INST_LIB)
-I$(PERL_ARCHLIB) -I$(PERL_LIB) $(TEST_FILE)
# --- MakeMaker ppd section:
# Creates a PPD (Perl Package Description) for a binary distribution.
ppd:
@$(PERL) -e "print qq{<SOFTPKG NAME=\"DBI\" VERSION=\"1,20,0,0\">\n}.
qq{\t<TITLE>DBI</TITLE>\n}. qq{\t<ABSTRACT>Database independent interface for
Perl</ABSTRACT>\n}. qq{\t<AUTHOR>Tim Bunce (dbi-users\@perl.org)</AUTHOR>\n}.
qq{\t<IMPLEMENTATION>\n}. qq{\t\t<OS NAME=\"$(OSNAME)\" />\n}. qq{\t\t<ARCHITECTURE
NAME=\"i686-linux\" />\n}. qq{\t\t<CODEBASE HREF=\"\" />\n}.
qq{\t</IMPLEMENTATION>\n}. qq{</SOFTPKG>\n}" > DBI.ppd
# --- MakeMaker pm_to_blib section:
pm_to_blib: $(TO_INST_PM)
@$(PERL) "-I$(INST_ARCHLIB)" "-I$(INST_LIB)" \
"-I$(PERL_ARCHLIB)" "-I$(PERL_LIB)" -MExtUtils::Install \
-e "pm_to_blib({qw{$(PM_TO_BLIB)}},'$(INST_LIB)/auto','$(PM_FILTER)')"
@$(TOUCH) $@
# --- MakeMaker selfdocument section:
# --- MakeMaker postamble section:
# End.
