Your message dated Thu, 7 Apr 2011 00:43:43 +0100
with message-id <201104070043.43889.el...@debianpt.org>
and subject line
has caused the Debian Bug report #221707,
regarding installation-reports: debian-installer beta1 (daily) - minor create
FS bug
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
221707: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=221707
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports
Severity: Normal
Tags: sarge
INSTALL REPORT
Debian-installer-version: Daily Build 15-Nov-2003 downloaded from
http://gluck.debian.org/cdimage/testing/netinst/i386/daily/
uname -a: <The result of running uname -a on a shell prompt>
Date: 16-Nov-2003 22:18:00 -05:00
Method: 100MB CD image
Machine: Old Tyan Motherboard
Processor: Dual 333MHz Pentium II
Memory: 384MB
Root Device: SCSI /dev/sda
Root Size/partition table:
/dev/sda2 /boot 128MB
/dev/sda3 / 10GB
/dev/sda5 swp 1GB
Output of lspci:
I don't know dvorak keyboard so it is difficult to do anything...sigh.
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [E]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
When defining/creating file systems the mount point should be ignored
for swap partitions rather than remembering the previously selected
partition.
Using the disk partitions that are already setup, reformating all of the
partitions except for /dev/sda1 which is NTFS which should be mounted
as /win2k.
First selected /dev/sda2, format it for reiserfs and mount as /boot
/dev/sda3, format for reiserfs and mount as /
/dev/sda1, leave partition intact and mount as /win2k
/dev/sda5, format as swap and the mount point was set to /win2k which
caused an error.
Workaround to avoid the bug: reformat swap first
Workaround if you are stuck in the bug: set the swap partition type as
some other type (e.g., ext2), when prompted about the mount point tell
it not to mount the partition, then immediately set file system type
back to swap and everything works like it should.
--- End Message ---
--- Begin Message ---
Thanks for your report.
Closing as it's an installation report from a debian installer version
which isn't supported anymore.
Feel free to test and report any issues against the current debian
installer release (Squeeze) or the daily images which supports more hardware
and also
it's improved.
Thanks!
http://www.debian.org/devel/debian-installer/
--
Melhores cumprimentos/Best regards,
Miguel Figueiredo
http://www.DebianPT.org
--- End Message ---