Script started on Sun Sep 3 18:07:54 2006 macswell:~# cat /etc/apt/sources.list # # deb cdrom:[Debian GNU/Linux testing _Etch_ - Official Snapshot powerpc Binary-1 (20060810)]/ etch contrib main deb cdrom:[Debian GNU/Linux testing _Etch_ - Official Snapshot powerpc Binary-1 (20060810)]/ etch contrib main deb http://debian.lcs.mit.edu/debian/ etch main deb-src http://debian.lcs.mit.edu/debian/ etch main deb http://security.debian.org/ etch/updates main contrib deb-src http://security.debian.org/ etch/updates main contrib macswell:~# cat /etc/apt/sources.list.SAVE # # deb cdrom:[Debian GNU/Linux testing _Etch_ - Official Snapshot powerpc Binary-1 (20060810)]/ etch contrib main deb cdrom:[Debian GNU/Linux testing _Etch_ - Official Snapshot powerpc Binary-1 (20060810)]/ etch contrib main deb http://debian.lcs.mit.edu/debian/ etch main deb-src http://debian.lcs.mit.edu/debian/ etch main deb http://security.debian.org/ etch/updates main contrib deb-src http://security.debian.org/ etch/updates main contrib macswell:~# cat /etc/apt/sources.list.ORIG # # deb cdrom:[Debian GNU/Linux testing _Etch_ - Official Snapshot powerpc Binary-1 (20060810)]/ etch contrib main deb cdrom:[Debian GNU/Linux testing _Etch_ - Official Snapshot powerpc Binary-1 (20060810)]/ etch contrib main deb http://security.debian.org/ etch/updates main contrib deb-src http://security.debian.org/ etch/updates main contrib macswell:~# cp -p /etc/apt/sources.list.ORIG /etc/apt/sources.list macswell:~# aptitude install ntp-simple ntpdate Reading package lists... Done Building dependency tree... Done Reading extended state information... 0% Initializing package states... Done Reading task descriptions... Done Building tag database... Done The following NEW packages will be automatically installed: libssl0.9.7 ntp ntp-server psmisc The following NEW packages will be installed: libssl0.9.7 ntp ntp-server ntp-simple ntpdate psmisc 0 packages upgraded, 6 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/1271kB of archives. After unpacking 3240kB will be used. Do you want to continue? [Y/n/?] Writing extended state information... Done Preconfiguring packages ... Selecting previously deselected package libssl0.9.7. (Reading database ... 22427 files and directories currently installed.) Unpacking libssl0.9.7 (from .../libssl0.9.7_0.9.7i-1_powerpc.deb) ... Selecting previously deselected package psmisc. Unpacking psmisc (from .../psmisc_22.2-1_powerpc.deb) ... Selecting previously deselected package ntp. Unpacking ntp (from .../ntp_4.2.0a+stable-2sarge1_powerpc.deb) ... Selecting previously deselected package ntp-simple. Unpacking ntp-simple (from .../ntp-simple_4.2.0a+stable-2sarge1_powerpc.deb) ... Selecting previously deselected package ntp-server. Unpacking ntp-server (from .../ntp-server_4.2.0a+stable-2sarge1_powerpc.deb) ... Removing any system startup links for /etc/init.d/ntp-simple ... Removing any system startup links for /etc/init.d/ntp-refclock ... Removing any system startup links for /etc/init.d/ntp ... ntpd: no process killed Selecting previously deselected package ntpdate. Unpacking ntpdate (from .../ntpdate_4.2.0a+stable-2sarge1_powerpc.deb) ... Setting up libssl0.9.7 (0.9.7i-1) ... Setting up psmisc (22.2-1) ... Setting up ntp (4.2.0a+stable-2sarge1) ... Setting up ntpdate (4.2.0a+stable-2sarge1) ... Running ntpdate to synchronize clock. Setting up ntp-server (4.2.0a+stable-2sarge1) ... Starting NTP server: ntpd. Setting up ntp-simple (4.2.0a+stable-2sarge1) ... macswell:~# /etc/init.d/ntp-server restart Restarting NTP server: ntpd... done. macswell:~# ntpq -p remote refid st t when poll reach delay offset jitter ============================================================================== ntp2.arttoday.c 10.0.0.64 3 u 3 64 1 99.000 -0.879 0.001 LOCAL(0) LOCAL(0) 13 l 3 64 1 0.000 0.000 0.001 macswell:~# /etc/init.d/ntp-server stop Stopping NTP server: ntpd. macswell:~# cp -p /apt/sources.list.SAVE /etc/apt/sources.list macswell:~# aptitude update Ign[cdrom://[Debian GNU/Linux testing _Etch_ - Official Snapshot powerpc Binary-1 (20060810)] etch Release.gpg Ign cdrom://[DebiandGNU/Linux.testing]_Etch_e-tOfficialeSnapshotepowerpcgBinary-1 (20060810)] etch Release Ign cdrom://[DebiandGNU/Linux.testing _Etch_0-2OfficialoSnapshot powerpcrBinary-1a(20060810)] etch/contrib Packages/DiffIndex Ign cdrom://[DebiandGNU/Linux.testing _Etch_0-2OfficialoSnapshot powerpcrBinary-1a(20060810)] etch/main Packages/DiffIndex Get:1Whttp://debian.lcs.mit.edueetchgRelease.gpgy[189B]n.org] Hit http://debian.lcs.mit.edueetch.Release2.211.132.250)] Get:2Whttp://security.debian.orgtetch/updatesiRelease.gpgr[189B].211.132.250)] Get:3Whttp://debian.lcs.mit.eduletch/main1Packages/DiffIndex [12.6kB] Hit http://security.debian.orgWetch/updateseRelease Get:4Rhttp://debian.lcs.mit.edunetch/maindSources/DiffIndex [12.5kB] Ign http://security.debian.org etch/updates/main Packages/DiffIndex Ign http://security.debian.org etch/updates/contrib Packages/DiffIndex Ign http://security.debian.org etch/updates/main Sources/DiffIndex Ign http://security.debian.org etch/updates/contrib Sources/DiffIndex Hit http://security.debian.org etch/updates/main Packages Hit http://security.debian.org etch/updates/contrib Packages Hit http://security.debian.org etch/updates/main Sources Hit http://security.debian.org etch/updates/contrib Sources Fetchedo25.1kB in 2s (11.7kB/s) Reading package lists... Done macswell:~# aptitude upgrade Reading package lists... Done Building dependency tree... Done Reading extended state information... 0% Initializing package states... Done Reading task descriptions... Done Building tag database... Done The following packages have been kept back: ntp The following packages will be upgraded: ntpdate psmisc 2 packages upgraded, 0 newly installed, 0 to remove and 1 not upgraded. Need to get 142kB of archives. After unpacking 73.7kB will be used. Do you want to continue? [Y/n/?] Get:1ohttp://debian.lcs.mit.edu etch/main ntpdate 1:4.2.2+dfsg.2-1 [59.6kB] Get:2Whttp://debian.lcs.mit.edu etch/main psmisc 22.3-1 [82.0kB] Fetchedo142kB]in80s0(635kB/s) (Reading database ... 22527 files and directories currently installed.) Preparing to replace ntpdate 1:4.2.0a+stable-2sarge1 (using .../ntpdate_1%3a4.2.2+dfsg.2-1_powerpc.deb) ... Unpacking replacement ntpdate ... Preparing to replace psmisc 22.2-1 (using .../psmisc_22.3-1_powerpc.deb) ... Unpacking replacement psmisc ... Setting up ntpdate (4.2.2+dfsg.2-1) ... Installing new version of config file /etc/default/ntpdate ... Installing new version of config file /etc/init.d/ntpdate ... Installing new version of config file /etc/logcheck/ignore.d.server/ntpdate ... Setting up psmisc (22.3-1) ... macswell:~# /etc/init.d/ntp-server restart Restarting NTP server: ntpd... start-stop-daemon: warning: failed to kill 2436: No such process done. macswell:~# ntpq -p remote refid st t when poll reach delay offset jitter ============================================================================== rottnic.demon.n 193.67.79.202 2 u 4 64 1 98.988 3.284 0.001 LOCAL(0) LOCAL(0) 13 l 4 64 1 0.000 0.000 0.001 macswell:~# aptitude -v show ntp ntp-server ntp-simple ntpdate Package: ntp State: not installed Automatically installed: yes Version: 1:4.2.2+dfsg.2-1 Priority: optional Section: net Maintainer: Debian NTP Team Uncompressed Size: 934k Architecture: powerpc Compressed Size: 349k Filename: pool/main/n/ntp/ntp_4.2.2+dfsg.2-1_powerpc.deb MD5sum: d47e5c6572d9806556ac5dd94d87d3e9 Archive: testing Depends: lsb-base, adduser, netbase, perl-modules, psmisc, libc6 (>= 2.3.5-1), libcap1, libreadline5 (>= 5.1), libssl0.9.8 (>= 0.9.8b-1) Suggests: ntp-doc Conflicts: chrony, ntp-server (<= 1:4.2.0a+stable-9), ntp-simple (<= 1:4.2.0a+stable-9), ntp-refclock (<= 1:4.2.0a+stable-9) Replaces: ntp-server (<= 1:4.2.0a+stable-9), ntp-simple (<= 1:4.2.0a+stable-9), ntp-refclock (<= 1:4.2.0a+stable-9), xntp, xntp3 Description: Network Time Protocol: server and utility programs NTP, the Network Time Protocol, is used to keep computer clocks accurate over the Internet, or by following an accurate hardware receiver which interprets GPS, DCF-77, NIST or similar time signals. This package contains the server and utility programs. If you're serious about building a high-quality stratum 1 timekeeper, please take a look at Ulrich Windl's PPSkit patchset for the Linux kernel, available from the kernel.org mirror network in pub/linux/daemons/ntp. For more information about the NTP protocol / NTP server configuration and operation, load the optional Debian package 'ntp-doc'. Tags: admin::benchmarking, admin::configuring, interface::commandline, network::service, protocol::ip, role::sw:utility, use::timekeeping Package: ntp State: installed Automatically installed: yes Version: 1:4.2.0a+stable-2sarge1 Priority: optional Section: net Maintainer: Debian NTP Team Uncompressed Size: 492k Architecture: powerpc Compressed Size: 266k Filename: pool/main/n/ntp/ntp_4.2.0a+stable-2sarge1_powerpc.deb MD5sum: 4b95908ba945a5981de225e7f08a08cf Archive: , now Depends: libc6 (>= 2.3.2.ds1-21), libreadline4 (>= 4.3-1), libssl0.9.7, psmisc, perl-modules Recommends: ntp-server Suggests: ntpdate, ntp-doc Conflicts: chrony Replaces: xntp, xntp3 Description: Network Time Protocol: network utilities NTP, the Network Time Protocol, is used to keep computer clocks accurate over the Internet, or by following an accurate hardware receiver which interprets GPS, DCF-77, NIST or similar time signals. This package contains control programs which can access a remote NTP server. Thus you will need either ntp-simple or ntp-refclock; ntp-refclock includes drivers for radio clocks. For more information about the NTP protocol / NTP server configuration and operation, load the optional Debian package 'ntp-doc'. Tags: admin::benchmarking, admin::configuring, interface::commandline, network::service, protocol::ip, role::sw:utility, use::timekeeping Package: ntp-server State: installed Automatically installed: yes Version: 1:4.2.0a+stable-2sarge1 Priority: optional Section: net Maintainer: Debian NTP Team Uncompressed Size: 188k Architecture: powerpc Compressed Size: 31.9k Filename: pool/main/n/ntp/ntp-server_4.2.0a+stable-2sarge1_powerpc.deb MD5sum: 41f2214cbba83c953645d828cb08163c Archive: , now Depends: ntp-simple | ntp-refclock, ntp Suggests: ntpdate, ntp-doc Conflicts: ntp-simple (< 1:4.2.0), ntp-refclock (< 1:4.2.0), ntp (< 1:4.2.0-0.6) Replaces: xntp, xntp3, ntp (<= 1:4.1.0-2) Description: Network Time Protocol: common server tools NTP, the Network Time Protocol, is used to keep computer clocks accurate over the Internet, or by following an accurate hardware receiver which interprets GPS, DCF-77, NIST or similar time signals. This package holds the common files for the NTP server and all programs which need to run on the actual server. There are two server packages: 'ntp-simple' only knows about your computer's built-in clock. 'ntp-refclock' has built-in support for a variety of time signal receivers. Both server packages, of course, can synchronize with other servers across the Internet. Tags: admin::benchmarking, interface::commandline, interface::daemon, network::service, protocol::ip, role::aux:metapackage, use::timekeeping Package: ntp-simple State: installed Automatically installed: no Version: 1:4.2.0a+stable-2sarge1 Priority: optional Section: net Maintainer: Debian NTP Team Uncompressed Size: 287k Architecture: powerpc Compressed Size: 129k Filename: pool/main/n/ntp/ntp-simple_4.2.0a+stable-2sarge1_powerpc.deb MD5sum: f278da81542a03b383117acdbc223045 Archive: , now Depends: libc6 (>= 2.3.2.ds1-21), libssl0.9.7, ntp-server Suggests: ntpdate, ntp-doc, ntp Conflicts: chrony, ntp (< 1:4.1.0), ntp-refclock Replaces: xntp, xntp3, ntp (<= 1:4.1.0-2) Description: Network Time Protocol: daemon for simple systems NTP, the Network Time Protocol, is used to keep computer clocks accurate over the Internet, or by following an accurate hardware receiver which interprets GPS, DCF-77, NIST or similar time signals. This version of the ntp daemon can synchronize to other servers across the Internet, or (if none are available) use your computer's built-in clock as a time source for a local network. It is sufficient for most systems. If you wish to configure a reference clock, particularly if you have a radio clock, use the ntp-refclock package instead. Tags: admin::benchmarking, interface::daemon, network::service, protocol::ip, role::sw:server, use::timekeeping Package: ntpdate State: installed Automatically installed: no Version: 1:4.2.2+dfsg.2-1 Priority: optional Section: net Maintainer: Debian NTP Team Uncompressed Size: 201k Architecture: powerpc Compressed Size: 59.6k Filename: pool/main/n/ntp/ntpdate_4.2.2+dfsg.2-1_powerpc.deb MD5sum: d62a304a296e5fe20f5f6956dd5e0556 Archive: testing, now Depends: lsb-base, netbase, libc6 (>= 2.3.5-1), libcap1, libssl0.9.8 (>= 0.9.8b-1) Suggests: ntp Conflicts: ntp (< 1:4.0.98a) Replaces: ntp (< 1:4.0.98a), xntp, xntp3 Description: The ntpdate client for setting system time from NTP servers NTP, the Network Time Protocol, is used to keep computer clocks accurate over the Internet, or by following an accurate hardware receiver which interprets GPS, DCF-77, NIST or similar time signals. ntpdate is a simple NTP client which allows a system's clock to be set to match the time obtained by communicating with one or more servers. ntpdate is optional (but recommended) if you're running an NTP server, because initially setting the system clock to an almost-correct time will help the NTP server synchronize faster. The ntpdate client by itself is useful for occasionally setting the time on machines that are not on the net full-time, such as laptops. Tags: admin::benchmarking, admin::configuring, interface::commandline, network::service, protocol::ip, role::sw:client, use::timekeeping Package: ntpdate State: not installed Automatically installed: no Version: 1:4.2.0a+stable-2sarge1 Priority: optional Section: net Maintainer: Debian NTP Team Uncompressed Size: 168k Architecture: powerpc Compressed Size: 43.7k Filename: pool/main/n/ntp/ntpdate_4.2.0a+stable-2sarge1_powerpc.deb MD5sum: 67e6a656ad5786b54f5924b4d33f7da3 Archive: Depends: libc6 (>= 2.3.2.ds1-21) Suggests: ntp Conflicts: ntp (< 1:4.0.98a), chrony Replaces: ntp (< 1:4.0.98a), xntp, xntp3 Description: The ntpdate client for setting system time from NTP servers NTP, the Network Time Protocol, is used to keep computer clocks accurate over the Internet, or by following an accurate hardware receiver which interprets GPS, DCF-77, NIST or similar time signals. ntpdate is a simple NTP client which allows a system's clock to be set to match the time obtained by communicating with one or more servers. ntpdate is optional (but recommended) if you're running an NTP server, because initially setting the system clock to an almost-correct time will help the NTP server synchronize faster. The ntpdate client by itself is useful for occasionally setting the time on machines that are not on the net full-time, such as laptops. Tags: admin::benchmarking, admin::configuring, interface::commandline, network::service, protocol::ip, role::sw:client, use::timekeeping macswell:~# aptitude dist-upgrade Reading package lists... Done Building dependency tree... Done Reading extended state information... 96% Initializing package states... Done Reading task descriptions... Done Building tag database... Done The following packages are unused and will be REMOVED: libssl0.9.7 ntp The following packages will be automatically REMOVED: ntp-server ntp-simple The following packages will be REMOVED: ntp-server ntp-simple 0 packages upgraded, 0 newly installed, 4 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 2642kB will be freed. Do you want to continue? [Y/n/?] Writing extended state information... Done (Reading database ... 22530 files and directories currently installed.) Removing ntp-server ... Stopping NTP server: ntpd. Removing ntp ... Removing ntp-simple ... Removing libssl0.9.7 ... macswell:~# ntpq -p bash: ntpq: command not found macswell:~# aptitude install ntp Reading package lists... Done Building dependency tree... Done Reading extended state information... 49% Initializing package states... Done Reading task descriptions... Done Building tag database... Done The following NEW packages will be installed: ntp 0 packages upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 349kB of archives. After unpacking 934kB will be used. Writing extended state information... Done Get:1ohttp://debian.lcs.mit.edu etch/main ntp 1:4.2.2+dfsg.2-1 [349kB] Fetchedo349kB]in40sB(661kB/s) Selecting previously deselected package ntp. (Reading database ... 22479 files and directories currently installed.) Unpacking ntp (from .../ntp_1%3a4.2.2+dfsg.2-1_powerpc.deb) ... Setting up ntp (4.2.2+dfsg.2-1) ... Installing new version of config file /etc/ntp.conf ... Starting NTP server: ntpd. macswell:~# ntpq -p remote refid st t when poll reach delay offset jitter ============================================================================== +host-87-75-128- 193.62.22.66 2 u - 64 1 100.125 11.048 1.742 *serenity.keneli .GPS. 1 u 2 64 1 22.484 10.761 2.892 +dsl027-160-099. .GPS. 1 u 1 64 1 39.917 9.965 0.528 -Time2.Stupi.SE .PPS. 1 u - 64 1 120.836 12.955 3.624 macswell:~# Script done on Sun Sep 3 18:36:57 2006