[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-3-amd64 (Debian 2.6.32-9) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Wed Feb 24 18:07:42 UTC 2010
[    0.000000] Command line: vga=788 initrd=/install.amd/initrd.gz -- quiet  BOOT_IMAGE=/install.amd/vmlinuz 
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[    0.000000]  BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bd780000 (usable)
[    0.000000]  BIOS-e820: 00000000bd780000 - 00000000bd78e000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bd78e000 - 00000000bd7d0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bd7d0000 - 00000000bd7e0000 (reserved)
[    0.000000]  BIOS-e820: 00000000bd7ed000 - 00000000be000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffa00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 00000001c0000000 (usable)
[    0.000000] DMI present.
[    0.000000] last_pfn = 0x1c0000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-E3FFF write-protect
[    0.000000]   E4000-EBFFF write-through
[    0.000000]   EC000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 1C0000000 mask FC0000000 uncachable
[    0.000000]   1 base 000000000 mask E00000000 write-back
[    0.000000]   2 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   3 base 0BE000000 mask FFE000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xbd780 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000bd780000
[    0.000000]  0000000000 - 00bd600000 page 2M
[    0.000000]  00bd600000 - 00bd780000 page 4k
[    0.000000] kernel direct mapping tables up to bd780000 @ 8000-d000
[    0.000000] init_memory_mapping: 0000000100000000-00000001c0000000
[    0.000000]  0100000000 - 01c0000000 page 2M
[    0.000000] kernel direct mapping tables up to 1c0000000 @ b000-13000
[    0.000000] RAMDISK: 7fc19000 - 7fffedd6
[    0.000000] ACPI: RSDP 00000000000fa470 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 00000000bd780000 00040 (v01 DELL    MI09    20091130 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000bd780200 00084 (v01 DELL   MI09     20091130 MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000bd7805e0 060AC (v01  A7448 A7448001 00000001 INTL 20051117)
[    0.000000] ACPI: FACS 00000000bd78e000 00040
[    0.000000] ACPI: APIC 00000000bd780390 0008C (v01 DELL   MI09     20091130 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000bd780420 0003C (v01 DELL   MI09     20091130 MSFT 00000097)
[    0.000000] ACPI: SLIC 00000000bd780460 00176 (v01 DELL    MI09    20091130 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000bd78e040 00072 (v01 DELL   MI09     20091130 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000bd78a5e0 00038 (v01 DELL   MI09     20091130 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000bd78f6f0 00363 (v01 DpgPmm    CpuPm 00000012 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-00000001c0000000
[    0.000000] Bootmem setup node 0 0000000000000000-00000001c0000000
[    0.000000]   NODE_DATA [000000000000e000 - 0000000000015fff]
[    0.000000]   bootmap [0000000000016000 -  000000000004dfff] pages 38
[    0.000000] (8 early reservations) ==> bootmem [0000000000 - 01c0000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0001000000 - 000166aa14]    TEXT DATA BSS ==> [0001000000 - 000166aa14]
[    0.000000]   #3 [007fc19000 - 007fffedd6]          RAMDISK ==> [007fc19000 - 007fffedd6]
[    0.000000]   #4 [000009e800 - 0000100000]    BIOS reserved ==> [000009e800 - 0000100000]
[    0.000000]   #5 [000166b000 - 000166b0f4]              BRK ==> [000166b000 - 000166b0f4]
[    0.000000]   #6 [0000008000 - 000000b000]          PGTABLE ==> [0000008000 - 000000b000]
[    0.000000]   #7 [000000b000 - 000000e000]          PGTABLE ==> [000000b000 - 000000e000]
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000]  [ffffea0000000000-ffffea00061fffff] PMD -> [ffff880001800000-ffff880006bfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x001c0000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x000bd780
[    0.000000]     0: 0x00100000 -> 0x001c0000
[    0.000000] On node 0 totalpages: 1562398
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 106 pages reserved
[    0.000000]   DMA zone: 3836 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 757688 pages, LIFO batch:31
[    0.000000]   Normal zone: 10752 pages used for memmap
[    0.000000]   Normal zone: 775680 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
[    0.000000] ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 7, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
[    0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bd780000 - 00000000bd78e000
[    0.000000] PM: Registered nosave memory: 00000000bd78e000 - 00000000bd7d0000
[    0.000000] PM: Registered nosave memory: 00000000bd7d0000 - 00000000bd7e0000
[    0.000000] PM: Registered nosave memory: 00000000bd7e0000 - 00000000bd7ed000
[    0.000000] PM: Registered nosave memory: 00000000bd7ed000 - 00000000be000000
[    0.000000] PM: Registered nosave memory: 00000000be000000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffa00000
[    0.000000] PM: Registered nosave memory: 00000000ffa00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at be000000 (gap: be000000:40e00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff880006e00000 s89880 r8192 d20712 u262144
[    0.000000] pcpu-alloc: s89880 r8192 d20712 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1537204
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: vga=788 initrd=/install.amd/initrd.gz -- quiet  BOOT_IMAGE=/install.amd/vmlinuz 
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.000000] Placing 64MB software IO TLB between ffff880006fdd000 - ffff88000afdd000
[    0.000000] software IO TLB at phys 0x6fdd000 - 0xafdd000
[    0.000000] Memory: 6085684k/7340032k available (3014k kernel code, 1090440k absent, 163908k reserved, 1860k data, 580k init)
[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:4352 nr_irqs:472
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000]   alloc irq_desc for 24 on node 0
[    0.000000]   alloc kstat_irqs on node 0
[    0.000000]   alloc irq_desc for 25 on node 0
[    0.000000]   alloc kstat_irqs on node 0
[    0.000000]   alloc irq_desc for 26 on node 0
[    0.000000]   alloc kstat_irqs on node 0
[    0.000000]   alloc irq_desc for 27 on node 0
[    0.000000]   alloc kstat_irqs on node 0
[    0.000000]   alloc irq_desc for 28 on node 0
[    0.000000]   alloc kstat_irqs on node 0
[    0.000000] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 2659.928 MHz processor.
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5319.85 BogoMIPS (lpj=10639712)
[    0.000014] Security Framework initialized
[    0.000017] SELinux:  Disabled at boot.
[    0.000456] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.002163] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.003152] Mount-cache hash table entries: 256
[    0.003242] Initializing cgroup subsys ns
[    0.003244] Initializing cgroup subsys cpuacct
[    0.003247] Initializing cgroup subsys devices
[    0.003249] Initializing cgroup subsys freezer
[    0.003250] Initializing cgroup subsys net_cls
[    0.003263] CPU: Physical Processor ID: 0
[    0.003264] CPU: Processor Core ID: 0
[    0.003267] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.003268] CPU: L2 cache: 256K
[    0.003269] CPU: L3 cache: 8192K
[    0.003271] CPU 0/0x0 -> Node 0
[    0.003274] mce: CPU supports 9 MCE banks
[    0.003283] CPU0: Thermal monitoring enabled (TM1)
[    0.003286] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8
[    0.003292] using mwait in idle threads.
[    0.003294] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[    0.003297] ... version:                3
[    0.003298] ... bit width:              48
[    0.003299] ... generic registers:      4
[    0.003301] ... value mask:             0000ffffffffffff
[    0.003302] ... max period:             000000007fffffff
[    0.003303] ... fixed-purpose events:   3
[    0.003304] ... event mask:             000000070000000f
[    0.003978] ACPI: Core revision 20090903
[    0.032720] Setting APIC routing to flat
[    0.033045] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.072628] CPU0: Intel(R) Core(TM) i5 CPU         750  @ 2.67GHz stepping 05
[    0.180206] Booting processor 1 APIC 0x2 ip 0x6000
[    0.191153] Initializing CPU#1
[    0.267894] CPU: Physical Processor ID: 0
[    0.267895] CPU: Processor Core ID: 1
[    0.267897] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.267898] CPU: L2 cache: 256K
[    0.267899] CPU: L3 cache: 8192K
[    0.267901] CPU 1/0x2 -> Node 0
[    0.267910] CPU1: Thermal monitoring enabled (TM1)
[    0.267913] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[    0.267928] CPU1: Intel(R) Core(TM) i5 CPU         750  @ 2.67GHz stepping 05
[    0.267934] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.287948] Booting processor 2 APIC 0x4 ip 0x6000
[    0.298205] Initializing CPU#2
[    0.375618] CPU: Physical Processor ID: 0
[    0.375619] CPU: Processor Core ID: 2
[    0.375620] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.375622] CPU: L2 cache: 256K
[    0.375622] CPU: L3 cache: 8192K
[    0.375624] CPU 2/0x4 -> Node 0
[    0.375634] CPU2: Thermal monitoring enabled (TM1)
[    0.375636] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[    0.375664] CPU2: Intel(R) Core(TM) i5 CPU         750  @ 2.67GHz stepping 05
[    0.375670] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[    0.395685] Booting processor 3 APIC 0x6 ip 0x6000
[    0.405940] Initializing CPU#3
[    0.483341] CPU: Physical Processor ID: 0
[    0.483342] CPU: Processor Core ID: 3
[    0.483344] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.483345] CPU: L2 cache: 256K
[    0.483346] CPU: L3 cache: 8192K
[    0.483348] CPU 3/0x6 -> Node 0
[    0.483357] CPU3: Thermal monitoring enabled (TM1)
[    0.483359] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[    0.483401] CPU3: Intel(R) Core(TM) i5 CPU         750  @ 2.67GHz stepping 05
[    0.483407] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[    0.503371] Brought up 4 CPUs
[    0.503373] Total of 4 processors activated (21279.02 BogoMIPS).
[    0.504573] CPU0 attaching sched-domain:
[    0.504576]  domain 0: span 0-3 level MC
[    0.504577]   groups: 0 1 2 3
[    0.504583] CPU1 attaching sched-domain:
[    0.504584]  domain 0: span 0-3 level MC
[    0.504585]   groups: 1 2 3 0
[    0.504589] CPU2 attaching sched-domain:
[    0.504590]  domain 0: span 0-3 level MC
[    0.504592]   groups: 2 3 0 1
[    0.504595] CPU3 attaching sched-domain:
[    0.504597]  domain 0: span 0-3 level MC
[    0.504598]   groups: 3 0 1 2
[    0.504740] devtmpfs: initialized
[    0.508297] regulator: core version 0.5
[    0.508333] NET: Registered protocol family 16
[    0.508396] ACPI: bus type pci registered
[    0.508443] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.508445] PCI: Not using MMCONFIG.
[    0.508447] PCI: Using configuration type 1 for base access
[    0.508774] bio: create slab <bio-0> at 0
[    0.509283] ACPI: EC: Look up EC in DSDT
[    0.511623] ACPI: Executed 1 blocks of module-level executable AML code
[    0.516997] ACPI: Interpreter enabled
[    0.517000] ACPI: (supports S0 S3 S4 S5)
[    0.517015] ACPI: Using IOAPIC for interrupt routing
[    0.517057] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.519820] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.525419] PCI: Using MMCONFIG at e0000000 - efffffff
[    0.532993] ACPI Warning: Incorrect checksum in table [OEMB] - C9, should be C8 (20090903/tbutils-314)
[    0.533095] ACPI: No dock devices found.
[    0.533215] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.533312] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.533315] pci 0000:00:03.0: PME# disabled
[    0.533557] pci 0000:00:16.0: reg 10 64bit mmio: [0xf9fffc00-0xf9fffc0f]
[    0.533610] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.533613] pci 0000:00:16.0: PME# disabled
[    0.533664] pci 0000:00:1a.0: reg 10 32bit mmio: [0xf9c00000-0xf9c003ff]
[    0.533713] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.533716] pci 0000:00:1a.0: PME# disabled
[    0.533753] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf9ff8000-0xf9ffbfff]
[    0.533789] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.533792] pci 0000:00:1b.0: PME# disabled
[    0.533847] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.533851] pci 0000:00:1c.0: PME# disabled
[    0.533902] pci 0000:00:1d.0: reg 10 32bit mmio: [0xf9a00000-0xf9a003ff]
[    0.533951] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.533954] pci 0000:00:1d.0: PME# disabled
[    0.534120] pci 0000:00:1f.2: reg 10 io port: [0xdc00-0xdc07]
[    0.534125] pci 0000:00:1f.2: reg 14 io port: [0xd880-0xd883]
[    0.534130] pci 0000:00:1f.2: reg 18 io port: [0xd800-0xd807]
[    0.534134] pci 0000:00:1f.2: reg 1c io port: [0xd480-0xd483]
[    0.534139] pci 0000:00:1f.2: reg 20 io port: [0xd400-0xd41f]
[    0.534144] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf9800000-0xf98007ff]
[    0.534171] pci 0000:00:1f.2: PME# supported from D3hot
[    0.534174] pci 0000:00:1f.2: PME# disabled
[    0.534200] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf9fff800-0xf9fff8ff]
[    0.534211] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[    0.534251] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[    0.534259] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
[    0.534266] pci 0000:01:00.0: reg 1c 64bit mmio pref: [0xce000000-0xcfffffff]
[    0.534270] pci 0000:01:00.0: reg 24 io port: [0xec00-0xec7f]
[    0.534275] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfbe80000-0xfbefffff]
[    0.534322] pci 0000:01:00.1: reg 10 32bit mmio: [0xfbc00000-0xfbc03fff]
[    0.539351] pci 0000:00:03.0: bridge io port: [0xe000-0xefff]
[    0.539354] pci 0000:00:03.0: bridge 32bit mmio: [0xfa000000-0xfbefffff]
[    0.539358] pci 0000:00:03.0: bridge 64bit mmio pref: [0xce000000-0xdfffffff]
[    0.539415] pci 0000:02:00.0: reg 10 64bit mmio: [0xfbff0000-0xfbffffff]
[    0.539483] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.539487] pci 0000:02:00.0: PME# disabled
[    0.547297] pci 0000:00:1c.0: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
[    0.547342] pci 0000:00:1e.0: transparent bridge
[    0.547362] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.547546] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
[    0.547637] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[    0.561112] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[    0.561204] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[    0.561294] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
[    0.561384] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
[    0.561475] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.561566] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.561657] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 *11 12 14 15)
[    0.561749] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 14 *15)
[    0.561822] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.561824] vgaarb: loaded
[    0.561863] PCI: Using ACPI for IRQ routing
[    0.561968] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
[    0.561972] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.567160] hpet: hpet2 irq 24 for MSI
[    0.567224] hpet: hpet3 irq 25 for MSI
[    0.571233] hpet: hpet4 irq 26 for MSI
[    0.575227] hpet: hpet5 irq 27 for MSI
[    0.575240] Switching to clocksource tsc
[    0.576052] pnp: PnP ACPI init
[    0.576059] ACPI: bus type pnp registered
[    0.578621] pnp: PnP ACPI: found 13 devices
[    0.578623] ACPI: ACPI bus type pnp unregistered
[    0.578629] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
[    0.578631] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
[    0.578634] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
[    0.578636] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[    0.578640] system 00:07: ioport range 0xa00-0xadf has been reserved
[    0.578642] system 00:07: ioport range 0xae0-0xaef has been reserved
[    0.578650] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.578653] system 00:08: ioport range 0x800-0x87f has been reserved
[    0.578655] system 00:08: ioport range 0x500-0x57f has been reserved
[    0.578657] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.578659] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.578662] system 00:08: iomem range 0xfed45000-0xfed89fff has been reserved
[    0.578664] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.578666] system 00:08: iomem range 0xfed40000-0xfed8ffff could not be reserved
[    0.578670] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.578672] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.578676] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[    0.578679] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[    0.578681] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[    0.578683] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[    0.578685] system 00:0c: iomem range 0x100000-0xbdffffff could not be reserved
[    0.578688] system 00:0c: iomem range 0xfed90000-0xffffffff could not be reserved
[    0.583300] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01
[    0.583303] pci 0000:00:03.0:   IO window: 0xe000-0xefff
[    0.583306] pci 0000:00:03.0:   MEM window: 0xfa000000-0xfbefffff
[    0.583309] pci 0000:00:03.0:   PREFETCH window: 0x000000ce000000-0x000000dfffffff
[    0.583313] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    0.583315] pci 0000:00:1c.0:   IO window: 0x1000-0x1fff
[    0.583319] pci 0000:00:1c.0:   MEM window: 0xfbf00000-0xfbffffff
[    0.583322] pci 0000:00:1c.0:   PREFETCH window: 0x000000c0000000-0x000000c01fffff
[    0.583327] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[    0.583328] pci 0000:00:1e.0:   IO window: disabled
[    0.583332] pci 0000:00:1e.0:   MEM window: disabled
[    0.583334] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.583344]   alloc irq_desc for 16 on node -1
[    0.583345]   alloc kstat_irqs on node -1
[    0.583350] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.583353] pci 0000:00:03.0: setting latency timer to 64
[    0.583358] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[    0.583361]   alloc irq_desc for 17 on node -1
[    0.583362]   alloc kstat_irqs on node -1
[    0.583365] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.583368] pci 0000:00:1c.0: setting latency timer to 64
[    0.583373] pci 0000:00:1e.0: setting latency timer to 64
[    0.583376] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.583378] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.583379] pci_bus 0000:01: resource 0 io:  [0xe000-0xefff]
[    0.583381] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfbefffff]
[    0.583383] pci_bus 0000:01: resource 2 pref mem [0xce000000-0xdfffffff]
[    0.583385] pci_bus 0000:02: resource 0 io:  [0x1000-0x1fff]
[    0.583386] pci_bus 0000:02: resource 1 mem: [0xfbf00000-0xfbffffff]
[    0.583388] pci_bus 0000:02: resource 2 pref mem [0xc0000000-0xc01fffff]
[    0.583390] pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
[    0.583391] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.583410] NET: Registered protocol family 2
[    0.583571] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.584335] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.586661] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.586959] TCP: Hash tables configured (established 524288 bind 65536)
[    0.586960] TCP reno registered
[    0.587037] NET: Registered protocol family 1
[    0.587103] pci 0000:01:00.0: Boot video device
[    0.587141] Unpacking initramfs...
[    0.659064] Freeing initrd memory: 3991k freed
[    0.659895] audit: initializing netlink socket (disabled)
[    0.659903] type=2000 audit(1269208313.492:1): initialized
[    0.660184] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.661084] VFS: Disk quotas dquot_6.5.2
[    0.661119] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.661172] msgmni has been set to 11893
[    0.661299] alg: No test for stdrng (krng)
[    0.661332] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.661334] io scheduler noop registered
[    0.661335] io scheduler anticipatory registered
[    0.661336] io scheduler deadline registered
[    0.661359] io scheduler cfq registered (default)
[    0.661433]   alloc irq_desc for 29 on node -1
[    0.661435]   alloc kstat_irqs on node -1
[    0.661441] pcieport 0000:00:03.0: irq 29 for MSI/MSI-X
[    0.661447] pcieport 0000:00:03.0: setting latency timer to 64
[    0.661529]   alloc irq_desc for 30 on node -1
[    0.661530]   alloc kstat_irqs on node -1
[    0.661537] pcieport 0000:00:1c.0: irq 30 for MSI/MSI-X
[    0.661543] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.661601] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[    0.661677] vesafb: framebuffer at 0xcf000000, mapped to 0xffffc90011800000, using 1875k, total 14336k
[    0.661679] vesafb: mode is 800x600x16, linelength=1600, pages=2
[    0.661681] vesafb: scrolling: redraw
[    0.661682] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    0.693167] Console: switching to colour frame buffer device 100x37
[    0.724385] fb0: VESA VGA frame buffer device
[    0.725210] Linux agpgart interface v0.103
[    0.725212] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.725301] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.725512] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.725617] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    0.725654] PNP: No PS/2 controller found. Probing ports directly.
[    0.727992] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.727996] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.728065] mice: PS/2 mouse device common for all mice
[    0.728094] rtc_cmos 00:03: RTC can wake from S4
[    0.728116] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.728140] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.728147] cpuidle: using governor ladder
[    0.728148] cpuidle: using governor menu
[    0.728151] No iBFT detected.
[    0.728361] TCP cubic registered
[    0.728430] NET: Registered protocol family 10
[    0.728748] lo: Disabled Privacy Extensions
[    0.728933] Mobile IPv6
[    0.728934] NET: Registered protocol family 17
[    0.728983] PM: Resume from disk failed.
[    0.728986] registered taskstats version 1
[    0.729276] rtc_cmos 00:03: setting system clock to 2010-03-21 21:51:53 UTC (1269208313)
[    0.729310] Freeing unused kernel memory: 580k freed
[    0.729393] Write protecting the kernel read-only data: 4144k
[    0.799242] usbcore: registered new interface driver usbfs
[    0.799258] usbcore: registered new interface driver hub
[    0.800859] SCSI subsystem initialized
[    0.809640] usbcore: registered new device driver usb
[    0.815239] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.815259] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.815281] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.815284] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    0.815297] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.815322] ehci_hcd 0000:00:1a.0: debug port 2
[    0.819244] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[    0.819259] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf9c00000
[    0.828672] libata version 3.00 loaded.
[    0.834670] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.834698] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.834702] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.834706] usb usb1: Product: EHCI Host Controller
[    0.834709] usb usb1: Manufacturer: Linux 2.6.32-3-amd64 ehci_hcd
[    0.834712] usb usb1: SerialNumber: 0000:00:1a.0
[    0.834773] usb usb1: configuration #1 chosen from 1 choice
[    0.834792] hub 1-0:1.0: USB hub found
[    0.834798] hub 1-0:1.0: 2 ports detected
[    0.834830] ahci 0000:00:1f.2: version 3.0
[    0.834839]   alloc irq_desc for 19 on node -1
[    0.834840]   alloc kstat_irqs on node -1
[    0.834845] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.834873]   alloc irq_desc for 31 on node -1
[    0.834875]   alloc kstat_irqs on node -1
[    0.834881] ahci 0000:00:1f.2: irq 31 for MSI/MSI-X
[    0.834905] ahci: SSS flag set, parallel bus scan disabled
[    0.850744] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    0.850747] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst 
[    0.850751] ahci 0000:00:1f.2: setting latency timer to 64
[    0.890633] scsi0 : ahci
[    0.890691] scsi1 : ahci
[    0.890725] scsi2 : ahci
[    0.890759] scsi3 : ahci
[    0.890794] scsi4 : ahci
[    0.890827] scsi5 : ahci
[    0.890944] ata1: SATA max UDMA/133 abar m2048@0xf9800000 port 0xf9800100 irq 31
[    0.890946] ata2: SATA max UDMA/133 abar m2048@0xf9800000 port 0xf9800180 irq 31
[    0.890948] ata3: SATA max UDMA/133 abar m2048@0xf9800000 port 0xf9800200 irq 31
[    0.890951] ata4: SATA max UDMA/133 abar m2048@0xf9800000 port 0xf9800280 irq 31
[    0.890953] ata5: SATA max UDMA/133 abar m2048@0xf9800000 port 0xf9800300 irq 31
[    0.890955] ata6: SATA max UDMA/133 abar m2048@0xf9800000 port 0xf9800380 irq 31
[    0.890983]   alloc irq_desc for 23 on node -1
[    0.890984]   alloc kstat_irqs on node -1
[    0.890988] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.890998] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.891000] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    0.891006] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.891027] ehci_hcd 0000:00:1d.0: debug port 2
[    0.894958] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[    0.894968] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf9a00000
[    0.910453] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.910479] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.910483] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.910486] usb usb2: Product: EHCI Host Controller
[    0.910489] usb usb2: Manufacturer: Linux 2.6.32-3-amd64 ehci_hcd
[    0.910492] usb usb2: SerialNumber: 0000:00:1d.0
[    0.910562] usb usb2: configuration #1 chosen from 1 choice
[    0.910581] hub 2-0:1.0: USB hub found
[    0.910585] hub 2-0:1.0: 2 ports detected
[    1.145864] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    1.217682] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.222494] ata1.00: ATA-8: WDC WD5000AAKS-75V0A0, 05.01D05, max UDMA/133
[    1.222499] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.223658] ata1.00: configured for UDMA/133
[    1.237726] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-7 05.0 PQ: 0 ANSI: 5
[    1.277862] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    1.277867] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.277941] usb 1-1: configuration #1 chosen from 1 choice
[    1.278016] hub 1-1:1.0: USB hub found
[    1.278109] hub 1-1:1.0: 6 ports detected
[    1.389247] usb 2-1: new high speed USB device using ehci_hcd and address 2
[    1.521253] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    1.521257] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.521332] usb 2-1: configuration #1 chosen from 1 choice
[    1.521386] hub 2-1:1.0: USB hub found
[    1.521495] hub 2-1:1.0: 8 ports detected
[    1.556824] ata2: SATA link down (SStatus 0 SControl 300)
[    1.592825] usb 1-1.3: new high speed USB device using ehci_hcd and address 3
[    1.686465] usb 1-1.3: New USB device found, idVendor=058f, idProduct=6362
[    1.686469] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.686473] usb 1-1.3: Product: Mass Storage Device
[    1.686476] usb 1-1.3: Manufacturer: Generic
[    1.686479] usb 1-1.3: SerialNumber: 058F63626420
[    1.686559] usb 1-1.3: configuration #1 chosen from 1 choice
[    1.792325] usb 2-1.1: new low speed USB device using ehci_hcd and address 3
[    1.888330] usb 2-1.1: New USB device found, idVendor=413c, idProduct=3012
[    1.888335] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.888339] usb 2-1.1: Product: Dell USB Optical Mouse
[    1.888341] usb 2-1.1: Manufacturer: Dell
[    1.888410] usb 2-1.1: configuration #1 chosen from 1 choice
[    1.959904] usb 2-1.2: new low speed USB device using ehci_hcd and address 4
[    2.056911] usb 2-1.2: New USB device found, idVendor=413c, idProduct=2106
[    2.056915] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.056919] usb 2-1.2: Product: Dell QuietKey Keyboard
[    2.056922] usb 2-1.2: Manufacturer: DELL
[    2.057000] usb 2-1.2: configuration #1 chosen from 1 choice
[    2.061524] usbcore: registered new interface driver hiddev
[    2.063272] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input1
[    2.063310] generic-usb 0003:413C:3012.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
[    2.065787] input: DELL Dell QuietKey Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input2
[    2.065819] generic-usb 0003:413C:2106.0002: input,hidraw1: USB HID v1.10 Keyboard [DELL Dell QuietKey Keyboard] on usb-0000:00:1d.0-1.2/input0
[    2.065836] usbcore: registered new interface driver usbhid
[    2.065837] usbhid: v2.6:USB HID core driver
[    2.294952] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.295604] ata3.00: ATAPI: TSSTcorp DVD+/-RW TS-H653G, DW10, max UDMA/100, ATAPI AN
[    2.295625] ata3.00: applying bridge limits
[    2.296510] ata3.00: configured for UDMA/100
[    2.311375] scsi 2:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-H653G DW10 PQ: 0 ANSI: 5
[    2.630101] ata4: SATA link down (SStatus 0 SControl 300)
[    2.965253] ata5: SATA link down (SStatus 0 SControl 300)
[    3.300407] ata6: SATA link down (SStatus 0 SControl 300)
[    3.321642] Initializing USB Mass Storage driver...
[    3.321686] scsi6 : SCSI emulation for USB Mass Storage devices
[    3.321735] usbcore: registered new interface driver usb-storage
[    3.321737] USB Mass Storage support registered.
[    3.321791] usb-storage: device found at 3
[    3.321793] usb-storage: waiting for device to settle before scanning
[    3.324493] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    3.324520] sd 0:0:0:0: [sda] Write Protect is off
[    3.324522] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.324535] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.324629]  sda:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.329277] Uniform CD-ROM driver Revision: 3.20
[    3.329376] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    3.331925]  sda1 sda2 sda3
[    3.332124] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.334117] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.334146] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    8.307893] usb-storage: device scan complete
[    8.308392] scsi 6:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0
[    8.308885] scsi 6:0:0:1: Direct-Access     Generic- Compact Flash    1.01 PQ: 0 ANSI: 0
[    8.309382] scsi 6:0:0:2: Direct-Access     Generic- SM/xD Picture    1.02 PQ: 0 ANSI: 0
[    8.309881] scsi 6:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.03 PQ: 0 ANSI: 0
[    8.310166] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    8.310244] sd 6:0:0:1: Attached scsi generic sg3 type 0
[    8.310319] sd 6:0:0:2: Attached scsi generic sg4 type 0
[    8.310396] sd 6:0:0:3: Attached scsi generic sg5 type 0
[    8.313606] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    8.314227] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[    8.314848] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[    8.315476] sd 6:0:0:3: [sde] Attached SCSI removable disk
[    8.908013] ISO 9660 Extensions: Microsoft Joliet Level 3
[    8.941148] ISO 9660 Extensions: RRIP_1991A
[   18.657435] tg3.c:v3.102 (September 1, 2009)
[   18.657450] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   18.657457] tg3 0000:02:00.0: setting latency timer to 64
[   18.666771] tg3 mdio bus: probed
[   18.666773] eth%d: No PHY devices
[   18.666788] tg3: Problem fetching invariants of chip, aborting.
[   18.666798] tg3 0000:02:00.0: PCI INT A disabled
[  548.846264] usb 2-1.8: new high speed USB device using ehci_hcd and address 5
[  548.944643] usb 2-1.8: New USB device found, idVendor=090c, idProduct=1000
[  548.944648] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  548.944651] usb 2-1.8: Product: USB DISK
[  548.944654] usb 2-1.8: Manufacturer: SMI Corporation
[  548.944744] usb 2-1.8: configuration #1 chosen from 1 choice
[  548.944951] scsi7 : SCSI emulation for USB Mass Storage devices
[  548.945016] usb-storage: device found at 5
[  548.945017] usb-storage: waiting for device to settle before scanning
[  553.929545] usb-storage: device scan complete
[  553.930791] scsi 7:0:0:0: Direct-Access     USB      Flash Disk       1100 PQ: 0 ANSI: 0 CCS
[  553.931047] sd 7:0:0:0: Attached scsi generic sg6 type 0
[  553.933145] sd 7:0:0:0: [sdf] 990208 512-byte logical blocks: (506 MB/483 MiB)
[  553.934016] sd 7:0:0:0: [sdf] Write Protect is off
[  553.934020] sd 7:0:0:0: [sdf] Mode Sense: 43 00 00 00
[  553.934024] sd 7:0:0:0: [sdf] Assuming drive cache: write through
[  553.935633] sd 7:0:0:0: [sdf] Assuming drive cache: write through
[  553.935637]  sdf: sdf1
[  554.053207] sd 7:0:0:0: [sdf] Assuming drive cache: write through
[  554.053210] sd 7:0:0:0: [sdf] Attached SCSI disk
[  573.670440] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[  602.996602] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
