On Sat, 2005-05-14 at 20:19 +0200, maximilian attems wrote: > tags 308878 moreinfo > thanks > > On Fri, 13 May 2005, Svante Signell wrote: > > > Package: kernel-image > > Version: 2.6.10-1-686-smp and 2.6.11-1-686-smp ... > please send in working dmesg of 2.6.8 or 2.6.9.
Attached. > are you using scsi root? > if yes it's a initrd bug, you might want to look at #298736 No, the board has built-in SCSI but all disks are IDE. Root is at /dev/hda1, see the fstab entry: /dev/hda1 / ext3,ext2 defaults 0 1 > > -- > maks
Linux version 2.6.9-1-686-smp ([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian 1:3.3.5-2)) #1 SMP Thu Nov 25 02:24:54 EST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000027ff0000 (usable) BIOS-e820: 0000000027ff0000 - 0000000027ff8000 (ACPI data) BIOS-e820: 0000000027ff8000 - 0000000028000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 639MB LOWMEM available. found SMP MP-table at 000fb4b0 On node 0 totalpages: 163824 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 159728 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.0 present. ACPI: RSDP (v000 AMI ) @ 0x000faf40 ACPI: RSDT (v001 AMIINT 0x00000010 MSFT 0x00000097) @ 0x27ff0000 ACPI: FADT (v001 AMIINT 0x00000010 MSFT 0x00000097) @ 0x27ff0030 ACPI: MADT (v001 AMIINT DRAC-100 0x00000009 MSFT 0x00000097) @ 0x27ff00b0 ACPI: DSDT (v001 MSI AMIACPI 0x00001000 MSFT 0x0100000a) @ 0x00000000 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:6 APIC version 17 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 6:6 APIC version 17 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Built 1 zonelists Kernel command line: auto BOOT_IMAGE=269-686-smp ro root=301 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 463.948 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 641136k/655296k available (1668k kernel code, 13660k reserved, 731k data, 184k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 917.50 BogoMIPS (lpj=458752) Security Scaffold v1.0.0 initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0183fbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0183fbff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K CPU: After all inits, caps: 0183fbff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. CPU0: Intel Celeron (Mendocino) stepping 05 per-CPU timeslice cutoff: 366.40 usecs. task migration cache decay timeout: 1 msecs. Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay loop... 927.74 BogoMIPS (lpj=463872) CPU: After generic identify, caps: 0183fbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0183fbff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K CPU: After all inits, caps: 0183fbff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Celeron (Mendocino) stepping 05 Total of 2 processors activated (1845.24 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs checking if image is initramfs...it isn't (ungzip failed); looks like an initrd Freeing initrd memory: 4572k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfdb91, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [NRTH] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.NRTH._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: Power Resource [GFAN] (on) Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00f7a30 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x74be, dseg 0xf0000 PnPBIOS: Missing SMALL_TAG_ENDDEP tag PnPBIOS: Missing SMALL_TAG_ENDDEP tag PnPBIOS: Missing SMALL_TAG_ENDDEP tag PnPBIOS: Missing SMALL_TAG_ENDDEP tag PnPBIOS: Missing SMALL_TAG_ENDDEP tag PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver PCI: Using ACPI for IRQ routing ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 19 (level, low) -> IRQ 177 ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 185 ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 19 (level, low) -> IRQ 177 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x0 Initializing Cryptographic API Limiting direct PCI/PCI transfers. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 8 NET: Registered protocol family 20 ACPI: (supports S0 S1 S5) ACPI wakeup devices: UAR1 RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 4572KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/done. VFS: Mounted root (cramfs filesystem) readonly. Freeing unused kernel memory: 184k freed vesafb: probe of vesafb0 failed with error -6 NET: Registered protocol family 1 irq 169: nobody cared! [<c0108c8a>] __report_bad_irq+0x2a/0x90 [<c0108d80>] note_interrupt+0x70/0xb0 [<c0109061>] do_IRQ+0x131/0x140 [<c0106bd0>] common_interrupt+0x18/0x20 [<c0104030>] default_idle+0x0/0x40 [<c010405c>] default_idle+0x2c/0x40 [<c01040f2>] cpu_idle+0x42/0x60 [<c035c3a0>] unknown_bootoption+0x0/0x180 [<c035c982>] start_kernel+0x1a2/0x1e0 [<c035c3a0>] unknown_bootoption+0x0/0x180 handlers: [<c01d20ef>] (acpi_irq+0x0/0x16) Disabling IRQ #169 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 0000:00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: IBM-DTLA-305020, ATA DISK drive hdb: IC35L120AVVA07-0, ATA DISK drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 128KiB hda: 40188960 sectors (20576 MB) w/380KiB Cache, CHS=39870/16/63, UDMA(33) hda: cache flushes not supported /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 > hdb: max request size: 128KiB hdb: 241254720 sectors (123522 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(33) hdb: cache flushes supported /dev/ide/host0/bus0/target1/lun0: p1 p2 p3 p4 Probing IDE interface ide1... hdc: HITACHI DVD-ROM GD-2500, ATAPI CD/DVD-ROM drive hdd: ATAPI CD-RW 52XMax, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds Adding 546168k swap on /dev/hda7. Priority:-1 extents:1 EXT3 FS on hda1, internal journal Generic RTC Driver v1.07 APIC error on CPU1: 00(02) gameport: pci0000:00:10.1 speed 1217 kHz ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 185 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:00:0f.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xd400. Vers LK1.1.19 piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 440BX Chipset. agpgart: Maximum main memory to use for agp memory: 564M agpgart: AGP aperture is 64M @ 0xe8000000 input: PS2++ Logitech Wheel Mouse on isa0060/serio1 mice: PS/2 mouse device common for all mice usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 19 (level, low) -> IRQ 177 uhci_hcd 0000:00:07.2: Intel Corp. 82371AB/EB/MB PIIX4 USB uhci_hcd 0000:00:07.2: irq 177, io base 0000d800 uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ts: Compaq touchscreen protocol output Capability LSM initialized device-mapper: 4.1.0-ioctl (2003-12-10) initialised: [EMAIL PROTECTED] kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hdb2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hdb3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hdb4, internal journal EXT3-fs: mounted filesystem with ordered data mode. cpci_hotplug: CompactPCI Hot Plug Core version: 0.2 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 19 (level, low) -> IRQ 177 input: PC Speaker parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP] inserting floppy driver for 2.6.9-1-686-smp Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 hdc: ATAPI 24X DVD-ROM drive, 512kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) NET: Registered protocol family 10 Disabled Privacy Extensions on device c0325a40(lo) IPv6 over IPv4 tunneling driver lp0: using parport0 (interrupt-driven). eth0: no IPv6 routers present apm: BIOS not found. apm: BIOS not found.