Linux version 2.4.21 (root@arrakis) (gcc version 3.3 (Debian)) #4 Tue Aug 12 12:34:30 CEST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000001feaa000 (usable) BIOS-e820: 000000001feaa000 - 0000000020000000 (reserved) BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 510MB LOWMEM available. ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 130730 zone(0): 4096 pages. zone(1): 126634 pages. zone(2): 0 pages. ACPI: RSDP (v000 DELL ) @ 0x000fdf00 ACPI: RSDT (v001 DELL CPi R 10195.01310) @ 0x1fef0000 ACPI: FADT (v001 DELL CPi R 10195.01310) @ 0x1fef0400 ACPI: DSDT (v001 INT430 SYSFexxx 00000.04097) @ 0x00000000 ACPI: BIOS passes blacklist ACPI: MADT not present Dell Inspiron with broken BIOS detected. Refusing to enable the local APIC. Kernel command line: BOOT_IMAGE=Linux ro root=305 hda=scsi hdc=scsi apm=power-off nomce ide_setup: hda=scsi ide_setup: hdc=scsi Initializing CPU#0 Detected 1294.765 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 2582.11 BogoMIPS Memory: 514404k/522920k available (1570k kernel code, 8128k reserved, 548k data, 100k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: After generic, caps: a7e9f9bf 00000000 00000000 00000000 CPU: Common caps: a7e9f9bf 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) M processor 1300MHz stepping 05 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20030619 PCI: PCI BIOS revision 2.10 entry at 0xfc97e, last bus=1 PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S3 S4bios S4 S5) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7, enabled at IRQ 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] PCI: Probing PCI hardware PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Battery Slot [BAT1] (battery absent) ACPI: Lid Switch [LID] ACPI: Power Button (CM) [PBTN] ACPI: Sleep Button (CM) [SBTN] ACPI: Processor [CPU0] (supports C1 C2 C3, 7 performance states, 8 throttling states) ACPI: Thermal Zone [THM] (49 C) pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A Real Time Clock Driver v1.10e i810_rng hardware driver 0.9.8 loaded floppy0: no floppy controllers found Intel(R) PRO/100 Network Driver - version 2.2.21-k1 Copyright (c) 2003 Intel Corporation e100: selftest OK. e100: eth0: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 00:1f.1 PCI: Enabling device 00:1f.1 (0005 -> 0007) ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:DMA, hdd:pio hda: HITACHI_DK23FB-60, ATA DISK drive blk: queue c035d840, I/O limit 4095Mb (mask 0xffffffff) hdc: Samsung CD-RW/DVD-ROM SN-324B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 117210240 sectors (60012 MB) w/8192KiB Cache, CHS=7296/255/63, UDMA(100) ide-cd: passing drive hdc to ide-scsi emulation. Partition check: hda: hda1 hda2 < hda5 hda6 > ide-cd: passing drive hdc to ide-scsi emulation. Intel 810 + AC97 Audio, version 0.24, 12:35:44 Aug 12 2003 PCI: Setting latency timer of device 00:1f.5 to 64 i810: Intel ICH4 found at IO 0xdc40 and 0xd800, MEM 0xfaeff800 and 0xfaeff400, IRQ 11 i810: Intel ICH4 mmio at 0xe080b800 and 0xe080d400 i810_audio: Primary codec has ID 0 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 i810_audio: Connection 0 with codec id 0 ac97_codec: AC97 Audio codec, id: 0x8384:0x7650 (Unknown) i810_audio: AC'97 codec 0 supports AMAP, total channels = 2 Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Enabling device 01:01.0 (0000 -> 0002) usb.c: registered new driver usbdevfs usb.c: registered new driver hub Yenta IRQ list 04b8, PCI irq11 Socket status: 30000007 host/uhci.c: USB Universal Host Controller Interface driver v1.1 PCI: Setting latency timer of device 00:1d.0 to 64 host/uhci.c: USB UHCI at I/O 0xbf80, IRQ 11 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.1 to 64 host/uhci.c: USB UHCI at I/O 0xbf40, IRQ 11 usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.2 to 64 host/uhci.c: USB UHCI at I/O 0xbf20, IRQ 11 usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) ip_conntrack version 2.1 (4085 buckets, 32680 max) - 292 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. reiserfs: checking transaction log (device 03:05) ... Using r5 hash to sort names ReiserFS version 3.6.25 VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 100k freed Adding Swap: 281096k swap-space (priority -1) Journalled Block Device driver loaded ttyS1: LSR safety check engaged! ttyS1: LSR safety check engaged! parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected lp0: using parport0 (polling). ttyS1: LSR safety check engaged! Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 438M agpgart: no supported devices found. Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 438M agpgart: no supported devices found. Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 438M agpgart: no supported devices found. Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 438M agpgart: no supported devices found. Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 438M agpgart: no supported devices found. Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Tungsten Graphics version 20021029 agpgart: Maximum main memory to use for agp memory: 438M agpgart: Detected an Intel(R) 855GM Chipset. agpgart: PGTBL_CTL value is 0x1ffe0001 agpgart: Detected 892K stolen memory. agpgart: AGP aperture is 128M @ 0xf0000000 [drm] AGP 0.99 on Intel i810 @ 0xf0000000 128MB [drm] Initialized i830 1.3.2 20021108 on minor 0 SCSI subsystem driver Revision: 1.00 ide-cd: passing drive hdc to ide-scsi emulation. hdc: attached ide-scsi driver. scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: SAMSUNG Model: CDRW/DVD SN-324B Rev: U102 Type: CD-ROM ANSI SCSI revision: 02 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 0 ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 2 ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 4 ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 6 ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 64 ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 66 ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 68 ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 70 ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 72 ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 74 ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 76 ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 78 ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 0 FAT: unable to read boot sector ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 0 FAT: unable to read boot sector ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A [drm] Module unloaded Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Tungsten Graphics version 20021029 agpgart: Maximum main memory to use for agp memory: 438M agpgart: Detected an Intel(R) 855GM Chipset. agpgart: PGTBL_CTL value is 0x1ffe0001 agpgart: Detected 892K stolen memory. agpgart: AGP aperture is 128M @ 0xf0000000 [drm] AGP 0.99 on Intel i810 @ 0xf0000000 128MB [drm] Initialized i830 1.3.2 20021108 on minor 0 mtrr: base(0xf0000000) is not aligned on a size(0xf0000) boundary