Hola,
A ver si alguno habéis tenido este problema.
Tarjeta Conceptronic C54RU, utilizando ndiswrapper.
La condenada funciona de miedo si la enchufo una vez que el sistema está arrancado, pero si inicio el sistema ocurre lo siguiente:
107 Adding 128512k swap on /dev/hda3. Priority:-1 extents:1
108 ndiswrapper version 1.1 loaded (preempt=no,smp=no)
109 ndiswrapper: driver crtusb (Conceptronic,06/30/2004, 1.02.00.0000) loaded
110 usb 1-2: reset high speed USB device using address 2
111 usb 1-2: reset high speed USB device using address 2
.
.
.
261 usb 1-2: reset high speed USB device using address 2
262 usb 1-2: reset high speed USB device using address 2
263 usb 1-2: reset high speed USB device using address 2
264 usb 1-2: reset high speed USB device using address 2
Y así hasta que la desenchufo, entonces:
265 ndiswrapper (usb_reset_port:633): usb_reset_device() = -19
266 ndiswrapper (ndiswrapper_add_one_usb_dev:312): Windows driver couldn't initialize the device (C0000001)
267 ndiswrapper: probe of 1-2:1.0 failed with error -22
268 usbcore: registered new driver ndiswrapper
Y al final, cuando la vuelvo a enchufar otra vez:
292 usb 1-2: new high speed USB device using address 5
293 wlan0: ndiswrapper ethernet device 00:80:5a:27:04:66 using driver crtusb, configuration file 14B2:3C02.0.conf
294 wlan0: encryption modes supported: WEP, WPA with TKIP, WPA with AES/CCMP
Potemkin:/home/salva#
Un simple /etc/init.d/networking restart
Me la pone en marcha.
Alguno sabéis porque lo de usb 1-2: reset high speed USB device using address 2 ?
Distro: Debian - Testing Kernel 2.6.8 (home made)
Gracias
Salva
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
